vCores - RAM and use of HD

Similar Questions

• UPGRADE OF RAM AND USE EXPRESS CARD TO GET USB3

  Hello

  I have dv6470ec with the standard RAM below. I can increase my memory to 4 GB.  For example this RAM

  I found the info on your web site about max. Up to 2 GB of RAM, but I'm not shure if is a housing or the set.

  I also want to ask if posible use this Express card

  Thanks a lot for answare!

  RAM
  Memory locations
  Total memory slots 2
  Used memory locations 2
  Free memory locations 0
  Memory
  Type DDR2
  Size 2048 MB
  Channels # double
  DRAM frequency 266,0 MHz
  CASE # latency (CL) 4 clocks
  # For CASE # Delay (tRCD) RAS 4 clocks
  RAS # Precharge (tRP) 4 clocks
  Cycle Time (tRAS) 12 clocks
  (TRC) Bank Cycle time 16 clocks
  Physical memory
  56% memory usage
  Total 2.00 GB physical
  Available physical 880MO
  Total virtual 4.00 GB
  Available Virtual 2.41 GB
  SPD
  Number of Modules SPD 2
  Slot #1
  Type DDR2
  Size 1024 MB
  Hyundai Electronics manufacturer
  Band bandwidth Max PC2-5300 (333 MHz)
  Part number HYMP512S64BP8-Y5
  Serial number 04004142
  Week/year 19 / 07
  Timing chart
  Frequency CASE # latency, RAS # for CASE # RAS # preload tRAS tRC tension
  JEDEC #1 200.0 MHz 3.0 3 3 9 12 1 800 V
  JEDEC #2 266,7 4.0 MHz 4 4 12 16 1 800 V
  JEDEC #3 333,3 MHz 5.0 5 5 15 20 1 800 V
  Slot #2
  Type DDR2
  Size 1024 MB
  Hyundai Electronics manufacturer
  Band bandwidth Max PC2-5300 (333 MHz)
  Part number HYMP512S64BP8-Y5
  Serial number 00005027
  Week/year 19 / 07
  Timing chart
  Frequency CASE # latency, RAS # for CASE # RAS # preload tRAS tRC tension
  JEDEC #1 200.0 MHz 3.0 3 3 9 12 1 800 V
  JEDEC #2 266,7 4.0 MHz 4 4 12 16 1 800 V
  JEDEC #3 333,3 MHz 5.0 5 5 15 20 1 800 V

  Hello

  Since the following specifications, you can not pass of RAM:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01123783-1

  It supports 2 GB RAM max,

  You can use the ExpressCard - USB3.0 but you must make sure that it has. FYI: I have test after 3 or 4 years back and from my experience, just lose money. They have the best driver now.

  Kind regards.

• FF using too much RAM and slow down

  FF uses too much RAM
  After I started FF, like 5 minutes later, use as a 1 GB of ram, and if I don't restart it, I push up to 3 GB ~ 4 GB of RAM used

  the article above has not helped
  updated to version beta and resolved

• RAM support and use for windows vista and more

  If (my motherboard supports and) I install for example 6 GB of ram, vista/7 32-bit windows will recognize and be able to use it?
  or they leave half of the unusable ram? for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  32-bit operation Systrems are 32-bit operating systems for the limitations of the use of RAM.

  They do not change between Vista and Windows 7.

  For Windows 7 32 bit, read Ronnie Vernon MVP message of confirmation for you:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/8836959f-7d90-40c5-a2eb-a1e7b74dce2c

  "This is a limitation of 32-bit operating system.

  This version won't recognize up to 4 GB of RAM and, depending on the hardware installed, won't be able to use up to a maximum of approximately 3.5 GB. On a system 32-bit installed equipment uses any RAM beyond 3 GB for shared memory. »

  See you soon.

  Mick Murphy - Microsoft partner

• msmpeg2vdec.dll explorer.exe is originally to use all my RAM and disk i/o

  Hello

  When opening some folders (just by clicking on the file in a different folder is causing the problem too) that contain media files on my system it causes explorer.exe use all my RAM and max on my disk i/o.

  Process using explore and RamMap I see that msmpeg2vdec.dll on my system is causing explorer.exe use all my RAM and disk i/o.

  RamMap using I see the entire file 6 GB + is attempted to be loaded into memory to live. :(

  Full stack of the msmpeg2vdec.dll! Live ThreadedDecode wire then it tries to load the file into memory:

  Ntoskrnl.exe! KiSwapContext + 0x7a
  Ntoskrnl.exe! KiCommitThreadWait + 0x1d2
  Ntoskrnl.exe! KeWaitForSingleObject + 0x19f
  Ntoskrnl.exe! KiSuspendThread + 0 x 74
  Ntoskrnl.exe! KiDeliverApc + 0 x 211
  Ntoskrnl.exe! KiCommitThreadWait + 0x3dd
  Ntoskrnl.exe! KeWaitForMultipleObjects + 0 x 271
  Ntoskrnl.exe! ObpWaitForMultipleObjects + 0 x 294
  Ntoskrnl.exe! NtWaitForMultipleObjects + 0xe5
  Ntoskrnl.exe! KiSystemServiceCopyEnd + 0x13
  ntdll.dll. ZwWaitForMultipleObjects + 0xa
  KERNELBASE.dll! WaitForMultipleObjectsEx + 0xe8
  Kernel32.dll! WaitForMultipleObjects + 0xb0
  msmpeg2vdec.dll! CMFSampleList::WaitForMoreData + 0x2e
  msmpeg2vdec.dll! CH264DecoderSoftware::GetDataFromStream + 0xc2
  msmpeg2vdec.dll! CCoreH264Decoder::GetMoreData + 0x4d
  msmpeg2vdec.dll! GlobalGetMoreData + 0x13
  msmpeg2vdec.dll! getMoreData + 0x1e8
  msmpeg2vdec.dll! GetAnnexbNALUNoEncrypt + 0x33d
  msmpeg2vdec.dll! Parse_One_Slice_Nalu + 0xae
  msmpeg2vdec.dll! Parse_Nalu_Till_Meet_New_Pic + 0x5d
  msmpeg2vdec.dll! Task_PED + 0 x 184
  msmpeg2vdec.dll! StageExecute_PED + 0 x 91
  msmpeg2vdec.dll! TaskScheduler_FindAndExecuteTask + 0x12c
  msmpeg2vdec.dll! ThreadedDecode + 0 x 92
  Kernel32.dll! BaseThreadInitThunk + 0xd
  ntdll.dll. RtlUserThreadStart + 0x1d

  I know it's the msmpeg2vdec.dll! ThreadedDecode thread because if I hang just this thread into explorer.exe it stops the disk i/o and freezes at some current RAM usage, it should be. And if I kill the thread all my RAM is released.

  Oddly enough I can open the file just fine itself very well in an application and have no question also. Only when you try to display the file in the Explorer himself this problem occurs.

  Thanks for the help,

  Will be

  PS: Why does my mouse cursor disappeared when editing this post? Boring!

  It looks like the Explorer tent to generate preview thumbnails of the videos. You can try to disable the genration of the thumbnails in the options of Solution Explorer. Now, the Explorer shows only the icon.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Hello! I have a 32-bit version of Windows 7 and I subscribed plan creative mgoe (CC 2015 Photoshop and Lightroom). Unfortunately when I try to use photoshop there is a ram (out of memory) error. I have a 8 giga of ram, and I have already raised the ph ran

  Hello! I have a 32-bit version of Windows 7 and I subscribed plan creative mgoe (CC 2015 Photoshop and Lightroom). Unfortunately when I try to use photoshop there is a ram (out of memory) error. I have a 8 giga of ram, and I have already raised the photoshop preference range.

  It seems that the installation of a 32-bit version of Windows is your mistake. This limits each app to not more than 2-3 gigabytes, no matter how much RAM you install.

• Generate reports for ESX, VM, RAM, and CPU use list

  How will generate you a report for the list of ESX, VM, RAM and CPU used in your VSphere environment?

  Hello

  You can either use vCenter performance dashboards, select the chart options and chose the resource & corresponding metrics or select the host of the vSphere client, and then click file > report > summary of the host or Performance.

  Does that help?

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?

• When I try to compose an email, simply consist of window icon stuck in the taskbar windows cannot really expand and use it

  OK, the details of installation below, so when I try to compose an email, I just get a new message window icon stuck in windows
  taskbar cannot really expand and use it. If I reboot in safe mode with all the addons disabled, then it works fine. But
  If I restart normally and manually disable addons/plugins, then close and restart normally IE mode unsecured, it
  breaks, so doesn't seem to be an addon or plugin, but rather something with the configuration.

  Application Basics
  

  Name Thunderbird
  Version 31.6.0
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
  Profile folder
  See file
  (Local disk)
  Application version identifier 20150330093429
  Permit Plugins about: plugins
  Build configuration about: buildconfig
  Memory usage on: memory
  Mail and News accounts
  Outgoing server ID incoming servers
  Connection security name authentication security name connection default authentication method?
  Account2 (no) plain passwordCleartext of local records
  account3 (nntp) news.mozilla.org:119 passwordCleartext plain stbeehive.oracle.com:465 SSL passwordCleartext set to true
  account5 (imap) stbeehive.oracle.com:993 SSL stbeehive.oracle.com:465 SSL passwordCleartext true passwordCleartext
  Incident reports
  ID of the report
  BP-0a8986d2-ff0c-41C3-9da6-e770e2141224 24/12/2014
  BP-01f44ba7-3143-4452-AC98-981b62140123 23/01/2014
  Extensions
  Name enabled Version ID
  British English Dictionary 1.19.1 false [email protected]
  3.3.3 lightning {e2fda1a4-762b-4020-b5ad-a41df1933103} false
  Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
  Important change preferences
  Value name
  accessibility.typeaheadfind.flashBar 0
  Browser.cache.Disk.Capacity 358400
  Browser.cache.Disk.smart_size_cached_value 358400
  Fake Browser.cache.Disk.smart_size.first_run
  Fake Browser.cache.Disk.smart_size.use_old_max
  extensions.lastAppVersion 31.6.0
  fake font.internaluseonly.Changed
  make. Name.monospace.El Consolas
  font.name.monospace.tr Consolas
  make. Name.monospace.x - baltic Consolas
  make. Name.monospace.x - Central-euro Consolas
  make. Name.monospace.x - cyrillic Consolas
  make. Name.monospace.x - unicode Consolas
  make. Name.monospace.x - West Consolas
  make. Name.sans - serif.el Calibri
  font.name.sans - serif.tr Calibri
  make. Name.sans - serif.x - Baltic Calibri
  make. Name.sans - serif.x - Central-euro Calibri
  make. Name.sans - serif.x - cyrillic Calibri
  make. Name.sans - serif.x - unicode Calibri
  make. Name.sans - serif.x - western Calibri
  make. Name.Serif.El Cambria
  font.name.serif.tr Cambria
  make. Name.Serif.x - baltic Cambria
  make. Name.Serif.x - Central-euro Cambria
  make. Name.Serif.x - cyrillic Cambria
  make. Name.Serif.x - unicode Cambria
  make. Name.Serif.x - West Cambria
  make. Size.Fixed.El 14
  font.size.fixed.tr 14
  14 are. Size.Fixed.x - Baltic
  make. Size.Fixed.x - Central-euro 14
  14 are. Size.Fixed.x - cyrillic
  make. Size.Fixed.x - unicode 14
  14 are. Size.Fixed.x - West
  make. Size.variable.El 17
  font.size.variable.tr 17
  17 do. Size.variable.x - Baltic
  make. Size.variable.x - Central-euro 17
  17 do. Size.variable.x - cyrillic
  make. Size.variable.x - unicode 17
  17 do. Size.variable.x - West
  gfx.blacklist.Suggested - driver-version 257.21
  mail.openMessageBehavior.version 1
  true mail.winsearch.firstRunDone
  mailnews. Database.global.datastore.ID 8 d 997817 CEE1-4f16-aa36-008d5baeb30
  Mailnews. Fake Database.global.indexer.Enabled
  true network.cookie.prefsMigrated
  Network.TCP.sendbuffer 65536
  places.database.lastMaintenance 1429004341
  places. History.expiration.transient_current_max_pages 78789
  plugin.disable_full_page_plugin_for_types application/pdf
  true plugin.importedState
  plugin. State.Flash 0
  plugin. State.Java 0
  plugin. State.np32dsw 0
  plugin. State.npatgpc 0
  plugin. State.npctrl 0
  plugin. State.npdeployjava 0
  plugin. State.npfoxitreaderplugin 0
  plugin. State.npgeplugin 0
  plugin. State.npgoogleupdate 0
  plugin. State.npitunes 0
  plugin. State.npoff 0
  plugin. State.npqtplugin 0
  plugin. State.nprlsecurepluginlayer 0
  plugin. State.npunity3d 0
  plugin. State.npwatweb 0
  plugin. State.npwlpg 0
  true plugins.update.notifyUser
  Graphics
  Adapter Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Fake license DirectWrite (6.2.9200.16571)
  Gamma settings ClearType: 2200 Pixel Structure: R
  WebGL Renderer blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  GPU accelerated Windows 0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Skiing AzureCanvasBackend
  AzureSkiaAccelerated 0
  AzureFallbackCanvasBackend Cairo
  AzureContentBackend Cairo
  JavaScript
  Incremental GC 1
  Accessibility
  0 Active
  Prevent accessibility 0
  Versions of the library
  Minimum version expected Version in use
  NSPR 4.10.6 4.10.6
  NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
  Util NSS 3.16.2.3 3.16.2.3
  NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
  S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECC

  Noticed in the information provided:
  Graphics adapt Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver.
  Try to update your driver graphics version 257.21 or newer.

  You can update your graphics driver and retest.

• A1103 new Ram and HARD drive will not start

  Hello.

  I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.

  When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.

  When I enter the Boot Manager I can see the following screen

  

  a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.

  Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.

  A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.

  In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.

  You cannot use a grey disc unless it was delivered with your specific Mac.  Native gray disc with Macs and can not e used on the other model of disc.

  You can probably call Apple and order a copy of the original disks

• Satellite U500 - 1 1 - Ram and HDD upgrade suggestions

  I am owner of a satellite U500 1 1 which has 4 GB of ram memory and hard drive HDD. There are suggestions, to upgrade up to 8 GB ram and SSD hard drive. Thanks in advance for any answers.

  I took the initiative to try Mushkin 8 gb (2x4gb) 99644 sodimm pc3-8500 7-7-7-20 essentials. After more than a month in use, I had no problem.

• HP ENVY 23-d107er: upgrading Ram and processor

  I want to upgrade RAM, up to 16 Gb. Help me, please - I don't understand how to set the compatibility of frequency and CASE latency of RAM and motherboard (sorry for my English). My motherboard frecuancy is a...

  Memory how much my motherboard support?

  Can I install DDR4 memory or not?

  Or "the best"type of memory is DDR3L?

  SO-DDR3 16 GB (2x8Gb) PC15000 - 1866 MHz Kingston HX318LS11IBK2/16?  -1866 MHz frequency

  If my choice is wrong, maybe I could install this (also DDR3L) RAM:

  16Gb (2x8Gb) SO-DDR3 PC12800 1600 MHz Kingston CL9 HyperX HX316LS9IBK2/16 Impact black? -1600 MHz frequency

  or

  Kingston HyperX Impzact [HX316LS9IB/8] SODIMM?

  And could you give me a tip of advise on upgrading the processor?

  The only choice is i7 - 3770 s?

  Hi there @_Alexei_,.

  Welcome to the Forums of HP Support!  I understand that you are looking for more information on CPU and RAM upgrade options for your computer.  I'm happy to help you with this.

  Looking at HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-NK (Lavaca3-SB) for your computer, it lists the upgrade RAM and CPU information.

  Here is the information of supported RAM:

  Dual channel memory architecture two DDR3 SO-DIMM (204) media pins
  PC3-10600 (DDR3-1333)
  PC3-12800 (DDR3-1600)
  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SO-DIMM (8 GB only available on systems using processors Ivy Bridge)

  Supports up to 16 GB on 64-bit computers (only available on systems using processors Ivy Bridge 16 GB)
  Supports up to 4 GB on 32 - bit * PC * PC 32-bit cannot resolve a full 4.0 GB memory.

  Also, here is the CPU of the same document information:

  TDP: Varies according to the processor
  Socket type: LGA 1155
  The motherboard supports the following processor upgrades:
  Intel Core i3-3xxxT (Ivy Bridge) Dual Core up to 35W
  Intel Core i3-3xxx (Ivy Bridge) Dual Core up to 55W
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core up to 35W
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core up to 45W
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core up to 65W
  Intel Core i3-2xxx (Sandy Bridge) Dual Core up to 65W
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core up to 35W
  Intel Core i7-2xxxS (Sandy Bridge) Quad Core up to 95W
  Intel Core i7-3xxxS (Ivy Bridge) Quad Core up to 65W
  G6xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
  G6xxT Intel Pentium Dual Core (Sandy Bridge) up to 35W
  G8xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
  G20xx Intel Pentium Dual Core (Ivy Bridge) up to 55W

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Upgrade RAM and disk on Tecra 8000

  I have a toshiba tecra 8000 p2 266 mhz, 64 MB, 6 GB HD.

  My question is I want to upgrade the ram and hard drive. can someone tell me what is the maximum I can put in my laptop. IM aiming for a 256 RAM and 40 GB HARD drive... I want to upgrade the processor, but I don't think it would be possible. If Yes please let me know what is the maximum.

  Thank you guys

  Hello

  I found information that your device can handle with max 256 MB and compatible module unit Pentium II are:
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB

  For user who have the Pentium III unit I'll also post this compatible module are:
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)
  PC100 32 MB (PA3003U)

  HARD drive upgrade is always a little more problematic because of the maximum capacity that will be recognized correctly, but I assume you can use up to 20 GB of HARD disk without problem.
  Sorry, but I didn? t find accurate information about it.

  Good bye

• Satellite A200-1GH - RAM and fx upgrade

  I upgraded my Ram from 1 GB to 2 GB memory using 2 x 1 GB 2RX8 PC2 5300 memories. I have 2 memory slots.
  Can I switch to 4 GB using 2 x 2 GB ones?

  My graphics card is Nvidia GeForce GO 7300. Can I switch to GO 7600? What other cards that you would recommend?

  My pc is Satellite A200 1GH with model No.: PSAECE - 02900WGE

  Please answer as soon as POSSIBLE in order to make these upgrades.

  Thank you in advance, Dimitris.

  Yes, you can upgrade your laptop up to 4 GB of RAM and it is maximum. You can use 2 x 2 GB RAM.
  Toshiba recommends 2 GB RAM with PA3513U-1M2G part number.

  GPU upgrade is not possible on mobile machines.

• Equium L20-197: to upgrade RAM and CPU

  Hello
  I recently bought a l20 - 197 and if im happy of all, what I want to do is upgrade the ram and processor. Ive found a supplier for ram (www.crucial.com), even if I need some details on the processor that it taken and if it can actually be upgraded.
  Thank you!

  Hello

  Before I try to give you some info on the upgrade, I want to just comment on your ad. Satellite L20 is actually a unit of budget and doesn t expensive. Now, you want to invest enough money in the hardware upgrade. It's not really illogical. Why you didn t get more information and bought the best unit as Satellite M40 or same M70. For a 300 or 400 dollars more, you can have a superior unit.

  Sorry, but the best idea is to sell your one and buy another unit. This is my honest opinion on this subject.

  Now something about your questions: essentially upgrading the CPU is not possible due to the permanent connection method. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package).

  RAM upgrade is possible and meaningful. Your device has 512 MB of Ram in one slot and unit can handle with 2 GB max.

  Good bye