VCS Highway internal of external call (Live ip)

Similar Questions

• Lync 2010 - different tone for internal vs external calls

  Is there a way to Lync 2010 to make a distinction between internal vs external calls? Now, if you are already online, you get a beep if a call comes in to the general response group or if it comes from an internal caller.  How can I configure the system so that people can make a difference? All suggestions will be useful!

  Hello

  The question you have posted is related to Lync2010 Forum, and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs/

  You can also check this link: http://technet.microsoft.com/en-us/library/gg195677.aspx

• Attach an external call to an internal event

  I created a new internal event I try to call 2 existing external calls to use in a program. When I go to add an existing external call, I don't get the option to select the 2 calls I want. I can't find any documentation on how to implement internal events and external calls.

  Any help or reading material would be appreciated.

  Hey, Robert,.

  How did you create these external calls? Only calls from a particular internal event will be available for this event. Create the outside call by selecting the drop down in an internal event > "create a new external event". In other words, the external calls won't be assignable to the internal event, he was created under. (see screenshot)

  

• External calling MeetMe disconnects

  Hello

  I wonder if it is possible to have an external caller questioned a number of meetme a DID or via a transfer?  I have the meetme conference Setup using call Mangager 8.6 w / 2901 as a bridge of conference material, and it works with the internal phone.  But when I try to use a DID and translate the call into a meetme conference number it connects, I hear the beep and then disconnects the call.

  Any suggestions?

  Thank you

  Dan.

  Or the other option works, you probably want to debug the exact reason for the disconnection.

  Make sure that you actually use the SFBC HW with good active codecs.

• Can I create external call to create the campaign?

  Hello

  Can I create an external call to create the campaign in SFDC?

  I want to create an external call by that I have to go to sfdc and create the campaign.

  Can this process be automated like this, I create a campaign in Eloqua > put the name of the campaign, the campaign id and the type of campaign he in settings > fill these values in the countryside in Eloqua himself. > and when the external call runs, a SFDC creates a proper campaign.

  I think it may seem like a dumb question but I just want to check whether it is possible or not?

  Activate the internal event for 'Create campaign', change the mapping for the external call.

  Then create the campaign, check the box "Sync with CRM", save, go get a cup of coffee.  Do not change the campaign until you see the ID external populated campaign.

  Once the synchronisation with SFDC has arrived, you can add elements of your canvas.

  Nathan

• Problem in the outgoing external call

  Hello

  I am facing a problem in creating an outgoing external call. I want to spend campaign / members of the campaign to the instance of salesforce, but when I create an external call to do this I get only 2 options i. e. are deleted and retrieve details of action in the second step, the previous options such as create, update do not come. Can someone help me with this?

  Thank you and best regards,

  Jocelyne

  Hi Jocelyn,

  There are two types of external calls in Eloqua... PUSH (which sends information to the CRM) and calls SWEATER (that pull information from the CRM). When you create a PULL call, your only options will be "deleted" and "recover". It seems that this is what you have tried to create. PUSH calls will have options for 'create' and 'update '.

  To create an external PUSH call, you must associate it with an internal event (pre-existing or you can create a new one), and then select the option to create an external call from nex.

  

  I hope this helps!

  Jordan

• ojdeploy is not recognized as an internal or external command

  I have an ADF web application that has 2 project, model-ViewController. I create the 3rd project named Build and an xml file called ojdeploy - build.xml in there.
  
  However, in the command line, I can't run ojdeploy. How do I ojdeploy?
  
  E:\SOAworkspace\otnapp\Build > ojdeploy buildfile - ojdeploy - build.xml
  'ojdeploy' is not recognized as an internal or external command
  operable program or batch file.
  
  
  -ojdeploy - build.xml.
  <? XML version = "1.0" encoding = "US-ASCII"? >
  
  <!-sets the default settings for any deployment tasks.
  Also defines some variables strictly for use in this file
  in macros
  ->
  < ojdeploy-construction >
  < deployment >
  < parameter name = "workspace" value="E:\SOAworkspace\otnapp\otnapp.jws"/ >
  < name of the parameter = value "profile" = "*" / >
  < name of the parameter = "nocompile" value = "true" / >
  < name of the parameter = "nodatasources" value = "true" / >
  < name of the parameter = "forcerewrite" value = "true" / >
  < parameter name = "outputfile" value="E:\SOAworkspace\otnapp\deploy\otntest.ear"/ >
  < / deploy >
  < / ojdeploy-construction >

  You can find ojdeploy on the following location

  C:\Oracle\Middleware\jdeveloper\jdev\bin

  Make sure you it as is in your PATH variable

• Pavilion slimline 400-334: upgrade internal or external Graphics

  Graphs can be improved in my pavillan 400-334 with internal or external card?

  There is NO graphic options expanded.

• Best practices for storage and backups on internal and external drives

  Hello

  I have a Mac laptop and I would like your advice on how to organize the storage of files on internal and external drives and how optimizes it the backup plan.

  From now on, my organization of file storage is:

  I keep my most important files on the internal disk of SSD encrypted and less critical files on an encrypted external drive (format ExFAT). This external hard drive was errors, so I bought a new Laetitia 2 Tb drive that I formatted in Mac OS journaled with encryption instead of ExFAT, to replace.

  For backups, I do not use Time Machine, but I use an application that synchronizes files between two disks. By using this application, I first sync the essential document on the SSD files internal to the external drive, and then I synchronize all the external drive to another external drive.

  My question is, if I keep this Organization of file storage or I should, for example just move all my files, critical and non-critical for the internal SSD (I could make enough room for that) and then backup up the whole Mac with Time Machine? Or there is a better way to organize files in this scenario?

  The second question is, if it is better to keep the Organization as it split storage (internal, less critical on external criticism) is what would be the best way to back up everything?

  Thanks in advance for all contributions.

  First of all, to the ExFAT is the problem, I suggest that the reader will just physically hurt.  ExFAT is perfectly acceptable as a format where Mac and PC can read/write.  You may have reacted a little leaving ExFAT for HFS, but you have made your choice and adapts to it.

  Here is how I operate my backups:

  I use CCC (CarbonCopyClone, $40, bombich.com).  It copies the boot sectors, drive, mapping, recovery Partition (these three are 'invisible' to DiskUtility for most) as well as system partitions and data records 'other'.  These other disks may be internal for clone-to-test-new-OSX in multi-disc systems or external for backup purposes.  The beauty is that you can start an external clone in a system crash, then CCC will be re - copy the active external clone on a new/fixed internal drive.

  Encryption isn't something I know, but... If only the content of the system partition and data is encrypted, it * could * be OK for clone-back to partition-as-encrypted partitions.  If you clone internal external the external partition is active and copy the 'encrypted plan', while small adjustments are made so that the race could be bad.  Copy of the files on my partitions unencrypted change interrupt because they are individual files.

  As an alternative, you could have a system drive that does CCC charge, let the clone encrypted and encrypted internal idle and just copy the entire map with the 'third system' active.

• Impossible to listen to the music or sounds using internal and external speakers

  Original: connect external speakers

  I have an Acer Aspire Z5700 all-in-one computer.  I have two external speakers with an audio jack and a USB port that I can connect to the computer and I when it is connected to the computer, I hear out of them my question is how to get the sound of the computer system internal and external speakers at the same time?

  Hi Joseph,.

  I would keep informs you that it is not possible to play sounds or music using internal and external speakers at the same time.
  You can play music using any one option at a time, either the internal speakers or external speakers.

• ipconfig/all and the ping command is not recognized, error: internal or external command.

  Original title: back command.
   
  Then I run ipconfig/all and show the command ping at the command prompt ipconfig/all error is not
  recognized as internal or external, command an executable program or a file of commands in windows xp professional sp3

  Hello

  These two commands are protected against accidental removal by Windows, that is if they get deleted Windows will work just add in the C:\Windows\System32 folder.

  At the command prompt, try to change this folder by typing cd C:\Windows\System32 (and then hit return) before trying the command ipconfig or ping.

  If this lets then run you your 'path' is probably messed up.

  You may first want to set a system restore point...

  http://support.Microsoft.com/kb/948247

  .. .in case spoil you things and that you want to restore to it...

  http://support.Microsoft.com/kb/306084

  ... then...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Click the Advanced tab
  • Click the Environment Variables button
  • In the section system variables, click on path (you may need to scroll)
  • Click the button change

  Paths are separated by semicolons (;), is a path to % SystemRoot%\system32? If not, add one (make sure to separate with semicolon). Click OK (three times) to get out. Restart the computer and try again without the cd above command.

  Tricky

• Error "IP is not recognized as internal or external, command an executable program or batch file."

  I just bought a HD installed XP and now I'm getting there "I P is not recognized as internal or external command an executable program or batch file" there's no problem with the net card to device mngr... What can I do?

  Original title: 'ip' not recognized

  Try "ipconfig/release" and "ipconfig / renew". "

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.

• Internal and external drives hard. Vista and XP recognizes the limits? The partitions ok?

  Hello. I had a few questions. It focuses on internal and external HDD. I have Vista and XP. I read a bit of info I would like to shed some light on.

  I watched an external HARD disc. A Western Digital 2 to My Book Studio Edition II external HARD drive, USB 2.0 / FireWire 800 / eSATA. In the end what he says:

  The system configuration required

  • Available USB port, FireWire 800 or 400 port, port eSATA or eSATA adapter card
  • Mac OS X 10.5.2 10.4.10+, +.
  • Windows 2000/XP/Vista
    Note: the 4 TB version works with Windows® Vista only. Windows 2000/XP do not support hard drives with capacities above 2 TB.

  I guess it's true. So: If someone were to buy a 4 TB model: can you even plug the drive in Windows XP and then partition it in two? Or will it give errors or not be recognized?

  What about Windows 7? I guess it's more advanced than Vista. Obviously.

  I am looking for 3 Tb + internal and external HARD drive. I can not find them. I ' v looked on the websites Seagates and Western Digital, Future Shop and Best Buy, local stores, etc. Maybe I missed them. I think I can start to see well for the holiday season.

  Thank you.

  I don't think that there may be a problem with xp sp3. I don't know with vista sp2 and 7 should work for you.

  BIOS update is also important.

  High-Tech http://www.computerstar.ca/datarecovery.html

• 'portqry' is not recognized as an internal or external command

  I can't launch the command portqry from my Win 7 Professional computer. My setup is home network and have 3 computers (1) Win 7 Professional (2) Win 7 Ultimate cannot run the command from any of my computers.    This is the message:

  Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>PortQry
  'portqry' is not recognized as an internal or external command
  operable program or batch file.

  C:\Windows\System32 >

  Any Councillor will be deeply appreciated

  Bob

  This command is not included in Windows 7.  First of all, download and install it.  Then, change directories to the location.  By default, it is C:\PortQryV2:

  CD /d C:\PortQryV2
  PortQry

  Boulder computer Maven
  Most Microsoft Valuable Professional