Veeam Monitor and RAM usage

Similar Questions

• High CPU and RAM usage - laptop Dell w / Vista

  Hello

  I have read several posts and tried many suggested fixes, but none seems to work so far.

  Hardware: Dell Inspiron 1525, with 3G of RAM

  Operating system: Vista Home Edition Premium, SP2

  Problem: CPU high (~ 50%) and RAM usage (~ 50%) when ideling.  I did both a "clean boot" and boot into "Safe Mode with network" and neither seemed to make much difference and certainly has not resolved the problem.

  When I go to the 'task manager' is a process "svchost.exe" system which is the eater of resources.  I can move the tab "services", but I'm not really sure how to use the information presented.  This is where I'm stuck, as I said, I read a few other posts with similar (but not identical/software) and I've tried a few things but do not seem to be able to solve the problem.  Please let me know what the next logical steps are at this address.  Thank you.

  Mark

  Try to scan with malwarebytes free:
  http://www.Malwarebytes.org/products/malwarebytes_free

  Also update windows to the last available update.

  It might the ProfSvc (user profile Service). Try to connect to a different profile (user) and see if the problem is also present.

• Kvaleyo.exe/Google Chrome Trojan/Virus...? 100% of the CPU and RAM usage

  Honestly, I don't know what it is... But after five minutes of my PC is on this program opens in the Manager of tasks called Kvaleyo. It keeps only opening of more bodies Besides this one. It gets to the point where it uses 100% of my CPU and RAM... I tried to remove the location... I have to close all instances that keep reopening anyway... I have so VERY quickly shut them down and hope THAT I got them all and delete... But the problem is... Every time I restart the PC files come back and the problem returns... It's a huge pain because I can't do anything at all.

  In any case... Any help would be appreciated.
  

  Hello

  See if this helps you:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon

• VMWare Workstation shared 11 VM reports 0.00 CPU and RAM usage

  I use Windows Professional 8.1.  Since I upgraded from VMWare Workstation 10 to 11, the split of the VM screen reported 0.00 CPU and RAM use.  At the time, I took the following screenshot, I got four virtual machines running.  Anyone who has to run in this issue:

  

  Thank you for reporting the issue. We had an internal bug tracking.

• frequency max sawtoothing, 0-100% and CPU usage it follows on all cores

  I've never seen frequency max sawtoothing like that or could find examples on the net...  I ran variations of msconfig from 8 cores starting at the current point of not designating the number of processors on startup (which solved mouse jerky movements). allowing the BCDEdit detectHAL did nothing. I killed the process and services but can't get rid of the saw tooth or see what is the cause...  For once I feel stupid that I see.

  processors xeon to dual-core quad on a motherboard s5520hc with 20Gigs of ram and a NVIDIA gtx650.  New installation of Windows7. Performance monitor reports CPU 0-7 and all of them are subject to sawtooth synchronizing and CPU usage 0 to 95%. CPU - Z shows the two processors are almost identical in performance. (bus speed varies very little)

  Any ideas would be appreciated.

  

  Hello

  You will need work with the support of Intel.

  Intel - Support
  http://www.Intel.com/p/en_US/support
  Intel - community and Forums
  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 1 Web site increases ram usage until Firefox slows, then crashes...

  Week or two ago FF33 started to have nits and jerky, gel and then crashed. I went through many support troubleshooting tips p (it comes crashing at this point) pages, uninstalled FF33, deleted files FF, that I could find, which was not all files, installed FF35 FF33, same result.

  Finally found my ram usage is high and paid attention to this. Reduced to 1 site constantly running up to the use of the ram. Regardless if 1 or 30 tabs of this Web site are open. If 1 tablet Omnium ram goes until it crashes. If none are open from this site, FF is fine. I've been on this site for many years without problems and really need to access.

  Any ideas how to solve the cause of that specific Web site?

  Thank you.

  Long answer, posted, empty response is entered. Anyway, great FF now.

• Why minimize a window reduce RAM usage in an exe?

  I've noticed this since LV8.5 (I am currently using LV2010 with IMAQ 4.5), that whenever I reduce my exe, the use of the RAM in the Task Manager Windows decreases considerably.  My exe charge and discharge lots of images and the RAM usage goes up to about 500 MB for the exe file.  As soon as I reduce the window of the exe, it falls to about 13 MB.

  Can someone explain why this is happening?

  Thank you

  Bruce

  It is very likely that when you reduce your application, Windows decided to the page the largest part of this memory to disk, because the application is probably not used actively. Therefore, Windows decides to recover the memory for other applications.

  You can test this by showing the column virtual memory in Windows Task Manager. There, you see all of the paged memory that your application uses. Your application always uses the same amount of memory, but Windows can store in the virtual memory on your hard drive until it takes again.

• PowerCLI Script required to identify all clusters in a data center and all hosts within each cluster and calculate it using cpu and ram, avg, min, and max.

  Hi all

  I'm new to powercli and try to create a script to list all clusters in a data center and all hosts in a cluster and calculate min, max and avg cpu usage and ram by the host and cluster. So far, I have tried the below but I can't publish the results of my script.

  $Function = @)
  ForEach ($DataCenter Get-Data Center)
  {
  ForEach ($cluster in ($DataCenter |)) Get - Cluster)) - need help to post the information here and confirm if this is correct or not.
  {
  ForEach ($hosts in ($cluster |)) Get - VMHost))
  {
  ForEach ($vms to ($hosts |)) Get - VM)) - do not know if I called you here functions properly
  {
  $allvms = @)
  $allhosts = @)
  $hosts = get-VMHost
  $vms = get - Vm

  {foreach ($vms in $hosts)
  $hoststat = "" | Select the host name, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin
  $hoststat. Host name = $vmHost.name
  
  $statcpu = get-Stat-entity ($vmHost) - start (get-date). AddDays(-30)-Finish (Get-Date) - MaxSamples 10000 - stat cpu.usage.average
  $statmem = get-Stat-entity ($vmHost) - start (get-date). AddDays(-30)-Finish (Get-Date) - MaxSamples 10000 - stat mem.usage.average

  $cpu = $statcpu | Measure-object-property value - average - Maximum - Minimum
  $mem = $statmem | Measure-object-property value - average - Maximum - Minimum
  
  $hoststat. CPUMax = $cpu. Maximum
  $hoststat. CPUAvg = $cpu. Average
  $hoststat. CPUMin = $cpu. Minimum
  $hoststat. MemMax = $mem. Maximum
  $hoststat. MemAvg = $mem. Average
  $hoststat. MemMin = $mem. Minimum
  $allhosts += $hoststat
  }
  }
  }
  }
  }

  $Function | Select the host name, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin | Export-Csv "c:\Function.csv" - noTypeInformation

  Any help on this is much appreciated.

  [Ordered] casting was introduced in v3 PowerShell.

  For PowerShell v2, you can use

  $vms = get - VM

  $stat = 'cpu.usage.average ','mem.usage.average '.

  $start = (get-Date). AddDays(-31)

  $report = get-Stat-entity $vms - start $start - Stat $stat - ErrorAction SilentlyContinue |

  Group-object - property {$_.} @entity.name} | %{

  $cpu = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  $mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  New-object PSObject-property @ {}

  Datacenter = Get-Datacenter - VM $_. Group [0]. Entity | Select the name of ExpandProperty-

  Cluster Cluster Get - VM = $_. Group [0]. Entity | Select the name of ExpandProperty-

  VMHost = $_. Group [0]. Entity.Host.Name

  Name = $_. Group [0]. @entity.name

  CpuMin = $cpu. Minimum

  CpuAvg = $cpu. Average

  CpuMax = $cpu. Maximum

  MemMin = $mem. Minimum

  MemAvg = $mem. Average

  MemMax = $mem. Maximum

  }

  }

  $report | Sort-Object-property Datacenter, Cluster, VMHost name |

  Export Csv report.csv - NoTypeInformation - UseCulture

• What do you use for deploying Windows 7 64-bit Ent regarding vCPU and RAM in your environment?

  Hi guys,.

  In my environment, we are currently running Windows 7 Ent 64-bit with 2 x vCPU and 2.5 GB of RAM.

  Everything is working fine, but recently I just got a free health check of Xangati and would like to know if there is something I could do to improve the environment.

  Essentially according to the results of the audit, I learned that I could be more indicer CPU and RAM on my desk from view.

  My host is running 16 x 2.599 GHz CPU, and according to the report once I hit the hard desk with activities (CPU maxed out at 100% for about 15 minutes), it is said that the "CPU usage" hypervisor uses only 1.9 GHz top.

  This means that a 1 x vCPU is more than enough to handle our daily tasks, so I went down there to 1 vCPU and test it hard once again by Windows Update.

  Even if the use of the "processor" said again that I didn't not max at 2.599 but use the Windows processor is maxed out.

  For me, it's like doing an update of windows on 1 vCPU is slower than when I used 2 vCPU but according to numbers, it shouldn't.

  It was the same exact situation with the RAM.

  If I look in the Windows Task Manager, Windows RAM was maxed out almost when I was doing tests, but on the side of the hypervisor, it says I'm only averaging about 1.7 GB.

  So now I'm not sure what matrix that I should go. The windows or on the side hyper-visiere? Haha.

  If I followed the hyper-visiere, I get scared when their desktop view is slow, the user could come to me and ask for additional resources, because that's what they see in the Task Manager.

  It will be hard to convince them not to worry about what the Task Manager shows.

  Note: I have no problem with the data since all desktop computers store is located in the FusionIO card.

  Anyway, just want to see it as the Deputy there to use when they have configured their Windows 7 operating system.

  Are you visiting x 2 vCPU and 2 or 3 GB of RAM? Or you would follow instead indicating you the numbers of the hypervisor?

  What would you do?

  Thank you guys!

  I feel that it is something that must be determined on a case by case.    We started with 1 vCPU which works great for 95% of our users.    We have others that require more resources while they were transferred in a different pool with additional resources.    In addition, we found that 1 vCPU works well for most everything except the video.   If you want to play a lot of video you can test with 2 vCPU and see if that works better.

  In the end, it's all about what your user comments and should dictate.   You don't want to shake your users of the resources, because that will lead to the decline in performance and the bad perception but also be careful not to approve because they will lead to poor performance and a bad perception.    Once people get a negative perception of the environment, it is difficult to cross.

• CPU AND ram supermetric of use

  Hi all

  I use vcops 5.7

  I need the alarm when using cpu and ram are two < 40% for a week on a host system.

  I think a supermetric can help me, but I don' t know how.

  I think that something like this:

  If (< 40 CPU usage) AND (use of mem < 40) then supermetricvalue = 1

  can I define a KPI like this: If supermetricvalue = 1 to 840 collection and then alarm

  but I don't know if it is possible to define a supermetric like that.

  Any suggestion?

  Thank you

  IG

  better try this with an alert at several levels.

  Help:

  ------------

  Configuration of Mulitilevel alert rules

  You can configure alert rules complex that evaluate several conditions on related resources. For example, you can write an alert multi-level rule that generates an alert if the workload on a VM exceeds A to B cycles, health is less than C and the host CPU usage is greater than the dynamic threshold.

  Because the conditions of hard threshold in several levels alert rules generate no additional alerts, multilevel warning function reduces the number of alerts and allows you to that you will concentrate only on important alerts.

  Alert rules several levels do not have a specific alert type in vCenter Operations Manager user interface. The user interface displays an alert at several levels in the form of alerts KPI HT, but the alert description identifies the alert for Multi level rule. Triggers and the details of the rule appear in the pane of the reason on the Details of the alert page. Multi-level alerts are also visible as violation HT KP in mashup for the alert graphic and INFO displays the details of the rule.

  ------------

• I would like to get this right... adding assets to the Library increases RAM usage?

  I'm almost done with a fairly large RPG containing more than 2000 bitmap resources and music.  When I run this app in iOS, Android or on PC, my RAM usage is well above 100 MB. I have no script code.  The game is divided into about 100 classes AS3 (1 per level).

  As an experiment, I deleted all my code and packed an app 'empty '.  My RAM usage is always greater than 100 MB.  This leads me to believe that my entire libraray is loaded into RAM at the spearhead of my application.

  Is there a way to control or prevent this?  Class Loader? External assets EFA?

  Everything you have built in your application is loaded into memory when the application is deployed. There is nothing you can do about it.

  SWC will not help. CFC is used, primarily, as an external when creating library and all of the objects referenced in the creation will be always compiled into the application unless you use RSL and load additional libraries when running. By checking "merged into code" you always ask the compiler to include all assets. If you merge in code - you will need to write the logic that loads libraries during execution.

  The main issues in your case, it's that you compile media files in the application. Videos, sounds and, to a lesser extent, the images are the biggest hogs memory. You must load them during execution - do not include them in your application. In particular, it comes to sound files - Flash is very good runtime playback/streaming.

  When I say "runtime loading" I don't mean not necessarily load from the network/Internet. Given that you develop mobile applications (I guess with air)-you can write these assets in the file system during installation and then recover as needed.

• Monitoring the memory usage on iOS using the Stats class

  I was check memory usage on an application I'm developing for iOS using Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).

  I added the class Stats to my project and redeployed and, Ouch, reported in Stats memory usage ramp upward (quite slowly) even when there is nothing going on in the application (just displaying a loaded bitmap).

  To try to find the question, I created a project with a test class that extends Sprite with just this single call in the constructor: -.

  addChild (New Stats());

  I have deployed to the device to check that he didn't swallow all of memory.

  But I was surprised to observe the use of the memory to crawl upward and upward (to 5) before kicking in some garbage and takes memory down. I left it running and then he slipped once again more than 7.5 this time before being deported back down to just below 3.

  So 2 questions that I would be grateful any feedback/comments/thoughts on related: -.

  1 is this normal (i.e. memory creeping up when there is nothing else than to the Stats in the project)?

  2 - What is the best way to monitor the memory usage in an application? Good enough stats - is Stats itself causing the memory usage?

  All the best guys!

  See also thread (http://forums.adobe.com/message/4280020#4280020)

  My conclusions are:-

  -If you run an application and let idle, use memory slips gradually upward (probably in memory is used to perform the Calc/refresh the display, etc.)

  -Periodic garbage collection occurs and memory is brought back down

  -This cycle could be more than 5 min.

  Work with your real application and memory will increase and be published much more quickly/regularly.

  -It's probably worth making an initial check running on your desktop computer to smooth out all the initial problems

• The SSD and RAM upgrade

  I have the 13-inch Retina Display early 2015 model. It contains 128 GB SSD and 8 GB of RAM.

  I wanted to update both of them. Is this possible? I agree with HARD drive even if that is supported. 128 GB is not enough for me actually.

  Help, please.

  Without the SSD and RAM are both not upgradable.

  One option is to sell your computer and use the money to buy a new one with the features you need.

  There are two options to add an HD card to your card HD slot. Both options will be flush with the case.

  YouTube - Transcend Jet Drive Lite for the retina of Macbook Pro and Macbook Air Review: Transcend Jet Drive Lite for the retina of Macbook Pro and Macbook Air - Storage Expansion card test - YouTube

  Transcend JetDrive Lite 350 Test - Drive TechRadar: Transcend JetDrive Lite 350 review

  The OWL mini-convoyeur: The OWL mini-convoyeur

  Kim

• Portege R500 - Upgrade processor and RAM

  Can I put in my proceror R500 and RAM?
  Is possible? If Yes, how can you procesor I used?

  Robert

  Hello

  You can upgrade the RAM.
  You can use the DDR2 667 MHz (PC2-5300) or 533 MHz 200 - PIN SODIMM modules.
  You can use a 1 GB RAM module this is the max!
  There is also an internal RAM which can be removed if only one slot is expandable!

  With regard to upgrading the CPU.
  Usually it s not advised to replace/upgrade of the processor because the BIOS has not been tested with other processors

• Satellite U300 - help hardware upgrade to SSD and RAM

  Hello world
  I want to completely upgrade my toshiba satellite U300-140, mount VISTA and default the technical features, posted above.

  I need your help to choose the best (and economic) device SSD and RAM slot. It is very important for me to know what is probably compatible with my device. Please, could you help me in your experience?

  And... an SSD is worthy, at the speed of my laptop? I was thinking about kingston 120 Gb or 240 GB V300

  http://www.Toshiba.it/discontinued-p...Lite-U300-14O/

  According to specification for laptop, you can be upgraded up to 4 GB RAM in order to use 2 x 2 GB of RAM. The compatible RAM modules have PA3513U-1M2G part number.

  I think with SSD, you shouldn't have any problems. I updated my old P500 with 250 GB Samsung 840 SSD and it works perfectly.