Satellite A30 still crashes after the cleaning of the fans

Similar Questions

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite 1400-104 crashes after the MBR softwarepackage

  Hello

  It is of a Toshiba Satellite 1400-103 (512 MB of memory). On startup, the Satellite works very well, no problems with surfin or broadcast, but when I run a main softwarepackage (such as Macromedia Dreamweaver or MS Word Excel), the PC freezes after a minute or two.
  I feel that the fan suddenly starts turning and the computer crashes. The only thing I can do is turn off taking the startbutton about 10 seconds, then turn it back on.
  I have already reinstalled Windows XP, but the same problem occurs after two weeks. My Antivirusprogramm works very well and I check every week on spyware and software malware.
  Does anyone have an idea about this problem?

  Thank you

  Hi emoreau

  Can you please tell me if there is the same problem without using this software package?

  The cooling fan usually begins to work if the processor speed increases and run under full power. Is this software that you use a complex and superior application?

• SATELLITE A30 ERROR! AFTER THE INSTALLATION OF RECOVERY DISKS

  INSTALLED BOTH DISKS AS MANUAL... GET THE ERROR MESSAGE... AT THE END OF DISC 2. CAN FIND NO WAY OUT OR FOLLOWING THE INSTALLATION... REMOVED DISC SEVERAL TIMES AND BEGAN THE PROCEEDINGS WITH THE SAME RESULT. NO ERROR; MESSAGE 437... ; CANNOT READ THE FILE... LOADS OF OTHER WRITTEN IS ALSO ON THE SCREEN... I THEN PRESS ESCAPE; AND HE LOOKS LIKE HE NEEDS A CASE NUMBER? NOW I REMOVE THE DISC; I CANNOT START THE SAME PROCEDURE TO NEW NOTHING WORKS ON PC...
  DISKS CAME WITH THE PC AND I'VE USED THEM TWICE MORE EASILY
  LAPTOP CODE A30 (PSA30E) 14 OLD WORK OK SOMETIMES SAID HE WOULD HAVE TO CLOSE BECAUSE THE GENERIC HOST HAD ENCOUNTERED A PROBLEM... RECOVERY DISKS ARE NOT SCRATCHED CAN ANYONE HELP?

  Hello

  upgrade your laptop with a special as material upgrading of RAM or else!
  It may be that an upgrade of hardware are problems when you use the recovery of th disc!

  Alternatively, you can try to reset the default BIOS settings.

  Sammy Bye

• Halo 2 crashes after the level "Gravemind".

  Halo 2 still crashes after the cutscene at the end of the level "The Gravemind".  The game acts like it's loading to the next level with the logo of Halo 2 and the vertical lighting of back and forth set.

  I had to play at this level twice, otherwise I can't get any achievement.  I'm tired of having to play at this level.
  My computer specs:
  AMD Phenom II X 4 955 3.2 Ghz Black Edition
  ATI Radeon 9870 x 2 1 GB GDDR5 Ram
  1 TB Western Digital Black
  ASUS M4A79T Deluxe Motherboard
  8 GB DDR3 1600 MHz Ram

  Hi Chuckthetekkie,

  Welcome to Microsoft Vista answers Forum!

  The system requirements for your computer is fine.

  I have a few here that might solve the problem.

  I suggest you perform the clean boot which disable the application non-Microsoft temporarily in conflict with programs. It helps us find what third-party application or service is causing the problem. Follow the steps in the link: how to troubleshoot a problem by performing a clean boot in Windows Vista: http://support.microsoft.com/kb/929135 Note: make sure to put the computer in a normal state, proceed to step 7 in the link. After you find out which application is causing the problem, please disable the program or application. If the problem persists, I suggest you to visit the site of the game Halo 2 to find if there are any updates or patches.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• sqldeveloper - 4.0.3.16.84 - x 64 crashes after the splash screen

  I had successfully used my installation of sqldeveloper - 4.0.3.16.84 - x 64 last week. After an update to windows 7 enterprise SP1 crashes after the splash screen and about 10% of the progress bar, until the message saying it is saving the extensions. There is no error or other messages of information displayed. I tried to run from a command window produces no additional information. I deleted the sqldeveloper folder and downloaded a zip file and reinstalled. Same behavior.

  

  The Data Modeler works very well.

  Any suggestions on how to do this problem.

  Hi Andy,.

  If the problem is not with the installation of SQL Developer (which you have unpacked in an empty directory) or find the JDK or having a JDK version that is inappropriate, you should then see if your user settings has been corrupted or (maybe) is somehow became less accessible than before the update of Windows 7 SP1.  These settings can be found under C: \Users\-Appdata\Roaming\SQL Developer\system4.0.3.16.84.

  
  

  Here is a compilation of a few standard tips offered several times before on this forum for this kind of situation:

  1 see if behavior persists after the removal of the settings and restart SQL Developer without migrating settings.

  (Be sure to make a backup (export) of your connections first!)

  2. see if (assuming that (1) does not help) allows to reinstall SQL Developer.

  If the fault cannot be placed on a migration of settings / download / installation corrupt, then we can start to consider...

  3. possible problΦmes with older JDK.

  4 OutOfMemory possible problΦmes that may be hidden by running only no Developer SQL from a command line console.

  5. a new bug.

  So try (1) and (2) If you have not already.  Ignore (3) If you are already using jdk7_u51 or later and are not on a Mac.  Point (4) can be a problem if you have many windows to restore and did not mount the Xmx values in the file product.conf - especially if you use a 64 bit JDK.  And (5), if you have the urge, see...

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  And if you want to try (1) in a clean 'sandbox' unaffected by existing directories of user settings, you can always add one

  AddVMOption - Dide.user.dir =

  line to your sqldeveloper.conf file.

  Hope this helps,

  Gary

  SQL development team

  P.S.: And keep in mind that SQL Developer "score" to a specific JDK in 4.0 and above all used the SetJavaHome in the product, conf, rather than sqldeveloper.conf

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

  Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

  It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• Constant crash after the last update!

  History is constantly crashing after the last update, I've noticed the logo has changed. If I use a different application then when I click on new in the history in closes unexpectedly. Any ideas? can I roll back? What to know about me? Thanks in advance,

  Mac Pro running 10.9.1

  32 GB of ram

  Intel Core i7

  Member of creative cloud

  Update: this issue is resolved with the latest version of Adobe AIR. Please download and install the most recent http://get.adobe.com/air

• computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8

  computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8

  You can expect problems from not being able to install to the loss of some functionality.  the best you can do is to install using the mode of compatibility or upgrade to cs6.

• Dreamweaver CS3 crashes after the end of daylight saving time

  In Windows XP x 64, Dreamweaver CS3 crashes after the end of DST. There is a technical note which seems to describe the situation exactly. http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402776 & sliceId = 1
  
  However...
  
  (1) technical note says that this only happens with ASP and PHP code. I use ColdFusion. (This is a minor point).
  
  (2) technical note said...
  
  Remove the WinFileCache - AD76BB20.dat the Dreamweaver user configuration folder. Note that on Windows, the Application Data and AppData folders are hidden by default, so check that your Windows Explorer folder options are set to show hidden folders. The location of this file is as follows:
  
  Dreamweaver CS3 on Windows Vista:
  C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver 9\Configuration
  Dreamweaver CS3 on Windows XP:
  C:\Documents and Settings\ [username] \Application Data\Adobe\Dreamweaver 9\Configuration
  
  However, I couldn't find WinFileCache - AD76BB20.dat in Documents and Settings or in Program Files (86) \Adobe. (86, it is because it is a 32-bit program on a 64-bit computer, but everything else is the same). I tried then the two directories for *.dat and there was no file that resembled something like WinFileCache - AD76BB20.dat.
  
  . Can someone help me?
  
  Thank you!
  
  

  Alan, thanks for the suggestion.

  I did the research found the file, deleted it, open Dreamweaver CS3, chose the same text - and it crashed as before.

  THEN I REBOOTED and tried again - no. CRASH. So it seems that a reboot is an essential part of the correction.

  BTW: My situation exactly match the description of the Technote. (1) the accident occurred when selecting - in design view or code - some text in a HTML context involved in the code ColdFusion; (2) I had no problem with these files before DST ended; (3) even after I've not had any problems with them in Macromedia Dreamweaver 8 on another machine - the problem is that the CS3.

  So the TechNote is correct as it will, but should be changed as follows:

  (1) ColdFusion should be included in the types of code that can be associated with the problem.
  2) instead of delete the WinFileCache - AD76BB20.dat, you should delete the WinFileCache-[any] .dat.
  (3) a reboot after the removal may be required.

  Anyway, problem solved.

  Thank you!