What do you use for deploying Windows 7 64-bit Ent regarding vCPU and RAM in your environment?

Similar Questions

• what OS you use for VMware Data Recovery 1.2.0.1131

  I tried all versions of Linux OS 32-bit for the configuration of the VM for the OVF, but I got the same error every time

  Your CPU is not support long mode. Use a 32-bit distribution. --

  I'm under ESX 4 and vCenter.

  Any idea?

  Thank you

  After assigning VT turned on in the BIOS, you may need to power cycle your system (power power off). A reboot is not enough.

  If this does not resolve the issue, take a look at KB1003945 - requirements Hardware and firmware for 64-bit operating systems to see if your system meets all the requirements to run 64-bit operating systems.

  André

• What do you use for Mrs site recovery to network solution

  I'm new to vmware srm and we have two sites and trying to understand the functioning of the srm and networking between sites so when Dr. kicks in the networking scheme would not affect and its new jersey - & gt; new york offices.  what you use and suggestion please.

  If you have time read that these discussions had good discussion on SRM and Networking options as mentioned tipping.  I hope that helps you to plan more effectively.

  http://communities.VMware.com/thread/202577;JSESSIONID=7E440B07E1B792F850CA522780932E68

  http://communities.VMware.com/message/1113568#1113568

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What stage of treatment do you use for email autoresponder to each sender form?

  Hello

  What stage of treatment do you use for email autoresponder to each sender form?

  Thank you

  Hello

  You can use option send email.

  Thank you

  edynamic expert Eloqua

• What software do you use for mapping campaign?

  Do you have your canvas to map your campaign? Using visio? Illustrator? In the early stages of the campaign when you went through with the team and you want to provide a Visual map of campaign/flowto your management team or of administrator you what do you use?

  I use Visio and follow the same process as jennifer.gonzalez for the revision of flow with my team. It is an easy to use, too.

• What Oracle network uses for CAR traffic? where you get the Info?

  Hello
  
  I use two-node RAC on Oracle 10 g R2 (10.2.0.3.0) version on SUN Solaris 10. I want to know "what Oracle network uses for CAR traffic? where you'll Info»
  
  -Kumar

  Hi Kumar,

  In 10g, you can query x$ ksxpia. If the cluster_interconnect is stored in the OCR (by default), you will get

  SQL > select INST_ID select, PUB_KSXPIA, PICKED_KSXPIA, NAME_KSXPIA, IP_KSXPIA, x$ ksxpia;

  If you have specified the cluster_interconnects parameter in your init.ora:

  Columns to look in: INST_ID select PICK NAME_KSXPIA IP_KSXPIA P

  And also you can use 'CPI oradebug' to see who connects the database uses:

  SQL > setmypid oradebug
  SQL > oradebug CPI

  It could be that useful...

  Thank you
  LaserSoft

• What metrics to use for memory capacity planning? Active or consumed (in request or use vROPS)

  Hey all,.

  I was wondering once more what metrics to use for memory capacity planning. Since the information from different sources (for example your ESXi host needs more RAM to Iwan Rahabok or VMworld 2012: Session VSP1729 - virtualized memory understanding performance management - Eric Sloof - NTPRO.NL Kit Colbert) pointing all assets (vROPS request), I expect that when we have high memory consumption / use in vCenter there will be no balloon / compression / permutation.

  Also the metric active / request should not be used for all workloads (e.g. Java / DB), why is - this? I have not found the reason of this anywhere, only the fact.

  Other sources such as Mark Achtemichuk suggests using consumed/use, which is the opposite (Understanding Active Memory - VMware vSphere Blog - Articles VMware vSphere).

  So I thought I'll with active / demand as metric and ignoring the warnings inside of vCenter.

  But the last time we have fixed half of our group, we had consumed/high memory usage and the vCenter began to inflate, compress, and finally to Exchange. Not a lot but I had not expected that, because memory active was only a small percentage of consumed.

  Can someone explain to me why this happened and who is right on this issue.

  Kind regards

  jengl

  jengl I don't know if you asked the wrong question, or I give the wrong answer :-)

  It is always good to attach screenshots, background to the issues, and what exactly you are trying to solve.

  You wrote:

  So to summarize:

  -ESXi uses consume to decide when to start the recovery techniques of memory RAM

  -To rightsize VMs for RAM, you must use the counter inside the BONE, not active

  -If you do not want to commit too much RAM and have a lot of the balloon you should right-size your virtual machines or extend the RAM / buy additional servers

  Please correct me if I'm wrong.

  My answer: you are right. If you do not have access to the guest operating system, then Active VM and VM consumed are better guess. Better than nothing :-)

  Sizing sizing of VM and ESXi are 2 different things (2 use cases) different. Please don't mix up the as soon as they are confusing. Do not try to resize the virtual machine when you are sizing the ESXi, unless you have a control total on them.

  You wrote:

  The question for me is: how many cache (standby under Windows) inside the VM is really necessary for the virtual machine to get the best performance without wasting resources. Perhaps this issue can be resolved only by tests or do you know another option?

  My answer: it's a different topic brother :-) It is different, because it is within a guest operating system (Windows in this case) and is no longer at the level of the ESXi. Suggest that post you another, possibly under Windows or vSphere too :-)

• Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

  Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

  1 mac OS extended (journaled)

  2 mac OS extended (journaled, encrypted)

  3 mac OS Extended (respect for case-sensitive, journaled)

  4 mac OS extended (case-sensitive, journaled, encrypted)

  See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

  When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
  • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).

• RunState.Sequence.Main vs RunState.SequenceFile? When you use the deployed software?

  RunState.Sequence.Main vs RunState.SequenceFile?  When you use the deployed software?

  Can someone explain to me why when I use something like->

  RunState.SequenceFile.Data.Seq ["Test Seq"]. Hand ["Test not"]. Result.Status

  the status will never be updated if I am set up for LabVIEW Run - Time Engine (but will work for the development of the system).

  Also why->

  RunState.Sequence.Main ["step Test"]. Result.Status

  Update for LabVIEW Run - Time Engine and development?

  I solved my problem with RunState.Sequence.Main ["step Test"]. Result.Status but I'm still curious why the reverse does not work?  Can someone give me please a validation test?

  Thank you very much!

  RunState.SequenceFile.Data.Seq contains the copy of time change sequences. These copies are not at all when running. At run time, a separate copy is made (and is accessible from RunState.Sequence) and only this copy of runtime is updated. These runtime copies are made for several reasons such as the following:

  (1) to ensure that changes to the sequence the runtime, do not affect the original version of the time edit of the file (you don't want to change the status to be an editing tool in the right sequence file?).

  (2) to support recursion, recursive calls in the same sequence have their own copy of the sequence so that State for a call is not crushed by one recursively calls the same sequence.

  There are probably other reasons as well, but these are probably the biggest.

  -Doug

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav

• What driver to use for a HP 8563 A Spectrum Analyzer and a Giga - tronics 12000 has

  What driver to use for a spectrum analyzer HP 8563 and a Giga-tronics 12000 microwave synth... these two are not in the driver list can someon help

  Since there is no drivers, you can create your own, request one, use the Instrument i/o Assistant, or hope that someone has one and he posts here. On the creation of a help or to ask one, see the main page of the Instrument Driver Network . As long as you're familiar with the instrument and the manual, creating a driver is not so difficult.

• When you use Word or Windows Mail my cursor to type goes in all directions without warning.

  When you use Word or Windows Mail my cursor to type goes in all directions without warning? What is the problem?

  Hi, the Dalesman,

  Using a laptop?  Make sure that your hand is not sweeping the touchpad while typing.

  HP Support document

  Troubleshooting of mouse - mouse cleaning details

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3432827&prodTypeId=12454&ObjectID=c00006616

  Good luck!

• I want to know what mircosoft to use for education online

  I want to know what mircosoft to use for education online

  If you plan to go to school, I would contact the school to see what their or are the requirements of instructors.

  J W Stuart: http://www.pagestart.com

• What do you use to track the specific type of mobile devices open your emails?

  Mobile email is on the rise. What do you use to track the specific type of mobile devices open your emails?

  We started to use the Sunflower (Email Analytics - sunflower) this month and have been very happy with it. They not only do report on e-mail clients, you will tell people how committed are with your email address (for example did they spend time reading it or just delete it right now?). They also allow you to track individually, which means you can identify iPhone or Android users and send them a targeted campaign.