Venue 8 7000 and Lollipop

Similar Questions

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• Venue 8 Pro and Vidoe photos at the store on SDHC card instead of the hard disk

  Have a coming Pro 8 with 32 GB of storage and want to have pictures and video store on the SDHC card instead of the hard drive.  Is this possible and if so, how?

  Yes ok... I'm not too much the same. I take not compressed w / my photos so I did not notice the problem. I think I've seen cela somewhere in one of the forums of dv8p. I'll see what I can find if someone beat me to a solution.

  Edit to add...

  OK, back here... found what could be useful info to the Tablet PC forum, maybe it by wire gives a looksee

  http://Forum.TabletPCReview.com/threads/how-do-i-change-where-my-venue-8-Pro-stores-images.61453/

• What is the difference of Windows 7 Build 6801, Build 7000 and Build 7600?

  My friend wants to install Windows 7 Build 6801. But after installation, the appearance is almost identical to Windows Vista.
  Then you will install Windows 7 Build 7000. After installation, the appearance is the same as Windows 7, but each window contains the "Send comments" link on the upper right side of the window.

  What is the good version number for Windows 7? Or these generation numbers are fake?

  Windows 7 build 6801 - pre-release (Alpha version) released to Public developers in 2008 Conference - status - expired

  Windows 7 build 7000 - pre-release (Beta) released to the general public for evaluation and test in January 2009 - situation - expired

  Windows 7 build 7100 - pre-release (Release Candidate build) published for the general public, near release for testing only, released in May 2009 - status - expired

  Windows 7 build 7600 - final (Release to Manufacturing) build generally available to the public to buy and use. Can be purchased at the store or on a new PC. Does not expire.

  Windows 7 build 7601 - updated to Windows 7 RTM (build 7601), free for people running build 7600

• The system - event ID 7000 and 7009 Windows Search - event viewer does not start

  I received the following message from Event Viewer:

  The research service Windows could not start because of the following error:

  The service has failed to demand launch or timely control.

  -

   

   7000

   0

   2

   0

   0

   0 x 80000000000000

   

   86705

   

   

   System

   Christine-PC

   

   

  -

   Windows Search

   %%1053

   

   

  I sent the online help which told me how to start the service.  But I got the following message is displayed:

  A timeout was reached (40000 milliseconds) while waiting for the Windows Search service to connect.

  -

   

   7009

   0

   2

   0

   0

   0 x 80000000000000

   

   86704

   

   

   System

   Christine-PC

   

   
  -

   40000

   Windows Search

   

   

  How to change the time to allow the connection?

  Christine

  You can try this.

• Venue 8 7840 and Skype

  Anyone having problems with their microphone does not work in Skype?

  Hi guys,.

  Since I was desperate to have a good technical support from Dell, I decided to look for an alternative fix the problem with the microphone for my self.

  I downloaded this version of Skype and now it works perfect, but I'm very disappointed with Dell support. This will be for sure the last time II buy a Dell product...

  

  See you soon

• Venue 11 pro and WRT400N problem

  I'm having a problem with this Linksys router. The v11p connects to the router with 5 bars, but the internet barely works. Most of the time when I try to access something that the connected to the internet, it can not connect (that is to say, sites Web, ms store, etc.). I plugged the v11p via WiFi tether an iPhone and internet worked hard without problem.

  I tried to reinstall the WiFi/BT drivers from the dell support site, but he has not made a difference.

  Anyone has any advice on how to improve this performance?

  Dell support called but they have a check that my drivers are up to date, which they were. Decided to return unit and go instead of Asus t100.

• After running diagnostics and restart the spooler does not print HP 7000

  I have two HP printers: Officejet 7000 wide format and Officejet Pro 8500 wireless and right now, neither one of them will be printed.  I have run all diagnostics on the 7000 and it indicates that the printer is working correctly.  My OS is Windows 7 64 bit and I got no error message nor have I installed new hardware, etc.   Currently, I have a document 'stuck' in limbo in the two printers.  I restarted the spooler which did not help the cause.  When I try to cancel all documents, it just shows 'delete... '. "and it's not fair.  In addition, I unplugged the usb for the 7000 and unplugged the printer, which did not help either.  It is interesting that both printers do this - I published recently several documents without problem.  Unfortunately, I am preparing for an upcoming class reunion in the coming days and still need to print additional documents.  Naturally, your expertise and your help is greatly appreciated and I hope there is a solution to these problems.  Thanking you in advance for a quick response.

  Perseverance pays!  After update some programs, etc... I'm now able to print!  I didn't know how to do this "resolved", so I'm posting it here.

• iCloud photo library stuck in an interminable loading which slows down and stops my entire network.

  Last month I've upgraded successfully to El Capitan. Since then, after choosing to automatically download and store my entire library to the cloud, the download process caused a lot of problems. First of all, I had to leave the laptop on day and night and connected to the internet to complete the download. He has almost completely downloaded (with several modem restarts because the massive data download accidents caused connectivity) but then I had a planned trip and had to shut down the process. I tried to start again when I arrived at my destination, but it seemed to have started the process everything again (see below where the progress bar is at the very beginning again when previously, it was almost completely to the end) and close network of my poor host several times AND he ate all my CPU activity slow down and even stop any other activity of the laptop. Finally, I had to leave the process altogether for the rest of my visit. In fact, I had to disable wifi on my laptop because the process continued in the background even when I got the Photos app off the power. When I returned home, I studied the problem and learned how to fix the library by pressing the command and Option keys when I turned on the photo program. Once, the process started all over again and this time, he showed an any number of items to download (there was less than 25 000 points before this download now it shows more than 26,000).

  

  Finally, I got it at the Apple Genius Bar, in the hope of a quick solution. He, even, fixed the library as well as a few other permissions by using Apple's Diagnostics. Everything seems to be working again, but the process had to start all over again for some reason any and he told me to connect the laptop to the modem via a cable and left running overnight until the process completed. I did it. The first night, I was happy. It seemed that 25% of the process had already been completed. At this rate, it wouldn't take another 4 days. He told me that when he gets in, he would never to do it again. HOWEVER, after the second night of leaving it night directly connected to the modem, I checked it this morning and it seems to have started all OVER AGAIN FROM THE BEGINNING! Still, he hangs up my entire network. I can't watch the Apple TV, or use my iPad for work or my iPhone to access and other plans. Currently, there seems to be a nightmare without end of download and spoil my network (and notice that there are now more 28 000 points).

  

  This is intolerable. I can't live in this endless loop of photos download crashing my network and slow down my programs. I understand that this is not a problem isolated to me. So, did anyone found one simple solution other than its use onedrive or flickr or another synchronization photo program?

  28 000 pictures takes a lot of time - it took me ten days to 7000 and whenever you try to 'fix' it do you it longer - I stopped mine during the day when I was home so it wouldn't screw up my internet access form other devices, defined the Mac not to go to sleep and turn anytime I don't have internet

  Basically, your choices are to turn it off and not use ICPL or use it and let him complete without constant interference and restart the process

  Once he finished he initial transfer it stays out of the way, even with large updates (I added more than 10,000 photos since my initial download)

  LN

• OfficeJet 7000 Wide Format pri: HP Officejet 7000 Wide format printer will not print black ink

  I'm looking for a solution fix what is an occasional problem with our Officejet 7000 and arose once again today. The printer will print any black ink. I did the procedure to print alignment and cleaning print head as well.  I tried to clean the evacuation on the real printer cartridge area as recommended by some responses from support group.  When this has happened, I can fix it usually wiping the area where the ink comes out of the printer cartridge, but nothing works today.  The cartridge is 3/4 full.

  Other than to throw this printer and all the ink cartridges, I bought already for later use, suggestions for what else someone could solve this problem?  There seems to be a lot of people who have posted similar problems in recent years.

  Hi @P-architect,.

  Thanks for the reply.

  The only print head is CN643A, the 6500 and 7500 HP 564 cartridges as well usage. I searched the HP Print Store and found that you really want to be looking for a KIT of REPLACEMENT FIELD HP 564, and the part number is CE001A. The replacement of the field Kit contains a set of ink which are used to set up the print head. It's not like there are none currently in stock, but it is a clickable link to resellers who may have one available.

  I hope this helps!

  Thank you.

• dv7t 7000 ssd upgrade

  I have two HDD of 750 GB (7200 RPM) HARD drive on my HP Dv7t 7000 and want to update the primary drive to a Samsung 850 Pro 512 GB SSD. When I checked my maintenance and Service of Guide, I noticed it says that my computer supports a 160 GB SSD.

  This means that what I think it means? Can I have no bigger than a 160 GB SSD? Thanks in advance for the advice.

  Not even. This simply means that HP offered only this option with the original purchase. Your selected SSD works perfectly. Don't forget to put it in the main drive HDD - 0 because only this Bay is bootable.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• several tabs in chrome in lollipop

  a new show began with chrome and lollipop 5.0.2. We cannot open more than one tab of chrome don't know what can be the issue I tried to erase the data from the cache partition still the problem is not solved and app

  OK sorry, now the problem is solved erased data chrome uninstalled and updated again

  Moderator please close this thread, I'm sorry to open this discussion

• Waveform display and the data flow problem

  Hello

  I have a mission and I am facing difficulties in a number of things.

  I wonder to monitor the level of CO and NH3 and the level of measured in ppm following the equations:

  for CO: 50 * (1-exp(-t/7000)) and NH3 is 35 * (1-exp(t/12000))

  The first problem, I do face is the trace of the on a waveform table.

  How can I draw on the graph of the level of CO and NH3 simultaneously / bundle tried but it don't did me not a graph.

  The second problem is that when the condition of the structure of the capital letter is true the loop stops running; How can I solve this problem?

  Thank you

  
  

• Adding second hdd to dv7-7000 will break the warranty?

  I want to add ssd as a second hdd to my dv7-7000 and I'm curious to know if this way I have the warranty

  Hi, congratulations on your purchase! If you have an option to add a secondary HARD drive, you will be certainly able to do that (not sure SSD/non-SSD), however, which certainly does not cancel the warranty.

  Just make sure you get the right part.

• 7000 & 7009 errors

  System - e-machines t3304 mod winxp sp3
  Download BSOD frequently with 7000 and 7009 errors.  Also still have the same problem when I start Turbo Tax 2010.
  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 06/03/2011

  Time: 16:20:35

  User: n/a

  Computer: TOM

  Description:

  Common toolbox service failed to start due to the following error:

  The service has failed to demand launch or timely control.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7009

  Date: 06/03/2011

  Time: 16:20:35

  User: n/a

  Computer: TOM

  Description:

  Delay (30000 milliseconds) waiting for service to connect common Toolbox.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  On the BSOD screen, the following text is displayed:
  Stop: 0x0000008e (0xc0000005, 0xbd28770c, 0xb6fe0868, 0x00000000)

  Nv4_disp.dll - address bd28770c base at bd012000, date stamp 4cb9d749

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Try the methods listed in the section below and check.
  You receive a random "0x0000008E" error message on a blue screen in Windows XP
  http://support.Microsoft.com/kb/827663

  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.