Veridata Oracle question: need to install on the source or target site?
We will use goldengate to do the migration.Source: operating system: aix 5.3 64-bit
DB: 11.1.0.7
Target is: OS: Linux Redhat 64-bit 5
DB: 11.2.0.3
I only find GoldenGate Veridata for linux db 11 GR 2 Veridata software by download and have not found of for AIX db 11 GR 1 material.
So I wonder how and where should I use Veridata.
Please advice. Thank you.
Thank you very much.
Is there a link on how to configure/install veridata?
Tags: Business Intelligence
Similar Questions
-
Data synchronization after restoring the database to the Source or target
Hi DBAs,
I've implemented replication unidirectional flow at the level of transactional database to the database schema (excluding some tables). It works very well without any problems after doing the tuning of flow with the help of health check scripts. My question is if some reasons, if I have to recover to the level of the database on the database Source then I need rebuild flows from scratch? Database size is close to 2 TB and after recovery, even using the pump data at the same time, it could take hours and also the source won't be available even after the recovery (data pump running job - if the source is online, then I was getting ORA-01555 errors and work was not).
Please notify by above circumstances what is the best way to re - synchronize data between the source and target.
Thank you
-Samar-I would export of the datadict (build) once again, just to avoid any MVDD, something to do directly after the restoration of the DB,.
because I'm not sure from the perception of this restoration DB in terms of DBID. Have you checked in rman if source db is considered to be the epitome?Then restart what are the messages in the target error queues. I think that you will have problems to move the first_scn
due to differences on some YVERT in source/target system.logmnr_restart_ckpt$. system will think it has holes.
You may need to manually remove a bunch of lines to allow the flow to jump on the fate of the YVERT
that have been sent and are not present in the source system.logmnr_restart_ckpt$ -
Is it possible to have the source and target schema in the same instance of DB?
Hi all
I'm using Oracle 11 g 1 material.
I spent another source than with OWB server locations.
In the course of deploy I get VLD-3064 and I can't deploy mapping due to the many warnings "table or view does not exist.
Is it possible to have the source and target schemas in the same case?
How to do?
Kind regards
MartinHi Martin!
1. the target schema have select rights for source-tables/views.
(Run as a user with dba rights: grant select onto ;). 2 «.. . none generated code will use the link dataabase...'.
This is only a warning and means there is no need to use a database link. If your mapping will be executed faster as using a database link.Greetings
Guenther Herzog -
How to install Photoshop CS6 for Mac on the new Mac computer without a DVD drive?
Download and Installation Help-
https://helpx.Adobe.com/download-install.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
You can contact the Adobe Support via chat and have them reset your activations ensure that related to the dead machine becomes available again.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
Serial number and activation support (non - CC) chat
-
Need to install on the client computer web analytics?
I installed web analytics in the server, in order to allow the user to access the web analysis, web analytics to install in the user's computer, or simply let them access the URL of web analytics, can I http / / hostname:16000 / webanalysis?They would have access via the URL. If they use client HTML, nothing else is necessary. If they want to access client Java (Web analysis Studio) they will need its own version of Java Run Time Client on their PC.
-
Lost my disc to install Windows XP and the need to install, have the product key
Hi I have lost my installation disk and you need to create a new version of xp on a new hard drive
* original title - I've lost my windows xp installation disc and need to install a new copy... I install with my computer keys *.
Please see: How to replace Microsoft software
-
TABLE import in the source and target OLAP and OLTP Informatica records
In the designer to map every time I import from my source OLTP and OLAP source table is displayed in its own folder named instance imported from. It is a problem that when I migrate my lower the workflow repository is always looking ofr these sources and targets. How to import or migrate there relative OLTP and OLAP source and target material in the table designer.
Appreciate the help.Hi, before you migrate you can choose options as explained below
1. create the same global name of connection for ODBC OLAP and OLTP and then import the tables to informatica
2. other is, after you import the source tables with any ODBC connection name, you can change the name of the file as below
a. check the table and in the Source Analyzer workspace to modify the table. In the table , tab click on rename
(b) change the name of the data base by "OLAP" or 'OLTP' depending on your source.
c. the source table is automatically moved to the folder OLAP and OLTP3. If the table is already existing in OLTP or OLAP, you can use the reuse or replacement of options when importing new mappings during the migration.
Just to test this scenario once and applies for all tables in the source. I do the same during the migration
Hope this helps
-
need to install on the machine where IE does not work how?
had to restore a machine running win7 pro 32-bit. IE does not work reinstall firefox can I do a disk or use a flash drive to install on this machine. How can I do?
- Download the Setup-> https://www.mozilla.org/en-US/firefox/all.html file
- Save flash, PIN, USB, key USB or transfer to it after the download is complete
- Transfer the installer on USB flash, PIN, USB, key to the system without browser
- Run the Setup program
See-> http://support.mozilla.org/en-US/kb/Installing+Firefox
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
How much memory is required?
Hi Welewis123,
It depends on what you install. For most of the Adobe programs required hard drive storage is minimal and pretty much any computer that meets the system requirements for CC2015 will be adapted. If you want more details, the size of the installed media is listed on this page: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools. I wish I could give you a number fast and strong, but I hope that gives you an idea.
Best,
Del
-
My laptop is on the point of death and my installation of $ LR is 4 months old. Can I uninstall and reinstall on the new pc?
No you can simply reinstall your software to install on your new computer.
-
Question about ACL's with the 2621 when using site to site VPN
I set up two site to site vpn. We have an ASA at our headquarters and branches will IOS routers - one is a 1811 and the other 2621. Both are running the latest versions of IOS, respectively. The two VPN site-to-site do not work. I have a list of inbound on the external interfaces of both routers, access that allows only the IP address of the ASA IP traffic. All other traffic is denied. I put NAT overload upward in the typical form, and I use ip outgoing inspection on the same interface, to allow incoming traffic back to surfing the internet. This configuration works very well with the 1811, where all traffic is blocked except traffic IP (IPSEC) coming from the ASA. Guests at our headquarters can reach hosts behind the 1811 and vice versa.
Here's my problem: the 2621 is processing traffic encapsulated on the external interface and block this traffic because it does not match. I know because when I turn on logging / debugging on the 2621, I see inbound traffic blocked by the ACL. Technically, I guess that it does not, but to this interface, the traffic is always encapsulated so I think it fits to this access list and then go to the Cryptography decapsulation card and be sent to the destination host. Just as it does on the 1811. I have not 'wan' t to create another line in the access list for all subnets to Headquarters. Why is not it works the same way as it does on the 1811? Is there something else I need to activate?
------------------------------------------------------------------------
Config of 1811:
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
!
hostname BranchVPN1
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
activate the default AAA authentication no
authorization AAA console
AAA authorization exec default local
!
AAA - the id of the joint session
no ip source route
IP cef
!
!
IP inspect the audit trail
inspect the IP dns-timeout 10
inspect the name IP internet udp timeout 30
inspect the name IP internet tcp timeout 30
inspect the name IP internet ftp timeout 30
inspect the name IP internet http timeout 30
inspect the name firewall tcp IP
inspect the name IP firewall udp
inspect the name IP firewall icmp
IP inspect the dns name of the firewall
inspect the name IP firewall ftp
inspect the name IP firewall http
inspect the name IP firewall https
inspect the IP firewall name ftps
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
!
IP domain name xxxx
!
!
!
!
username xxxxxxxxxx
!
!
!
class-map correspondence vpn_traffic
police name of group-access game
!
!
VPN policy-map
class vpn_traffic
in line-action police 2000000 37500 pass drop exceeds-action
!
!
!
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 2
ISAKMP crypto key address xxxx xxxxxx
ISAKMP crypto keepalive 10
!
life crypto ipsec security association seconds 28800
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac xxtransform
!
xxmap 10 ipsec-isakmp crypto map
defined peer xxxx
Set transform-set xxtransform
PFS group2 Set
match the address tunnelnetworks
static inverse-road
!
!
!
interface Loopback0
172.16.99.1 the IP 255.255.255.255
!
interface FastEthernet0/0
Description Connection to Internet (DHCP)
DHCP IP address
IP access-group outside_in in
no ip redirection
no ip unreachable
no ip proxy-arp
inspect the firewall on IP
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
xxmap card crypto
!
interface FastEthernet0/1
Description of the connection to the local network
address 172.20.1.1 IP 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
VPN service-policy input
!
interface Serial0/0/0
no ip address
Shutdown
No cdp enable
!
interface Serial0/1/0
no ip address
Shutdown
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 dhcp
!
no ip address of the http server
local IP http authentication
no ip http secure server
IP nat inside source list nat - acl interface FastEthernet0/0 overload
!
IP nat - acl extended access list
refuse any 10.0.0.0 0.255.255.255 ip
allow an ip
outside_in extended IP access list
allow udp any eq bootps host 255.255.255.255 eq bootpc
allow an ip host (ASA IPADDR)
deny ip any any newspaper
IP extended access list police
deny ip host xxxx any
deny ip any host xxxx
IP 172.20.1.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
tunnelnetworks extended IP access list
permit host 172.16.99.1 ip 10.0.0.0 0.255.255.255
IP 172.20.1.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
!
recording of debug trap
logging source-interface Loopback0
exploitation forest xxxx
access-list 160 note t is
not run cdp
!
!
control plan
!
Banner motd ^ CCAuthorized technician!
^ C
!
Line con 0
line to 0
line vty 0 4
exec-timeout 5 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 5 0
Synchronous recording
entry ssh transport
!
Scheduler allocate 20000 1000
end------------------------------------------------------------------------
2621 Config:
!
version 12.3
horodateurs service debug datetime msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
!
hostname BranchVPN2
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 notifications
no console logging
!
AAA new-model
!
!
AAA authentication login default local
activate the default AAA authentication no
authorization AAA console
AAA authorization exec default local
AAA - the id of the joint session
IP subnet zero
no ip source route
IP cef
!
!
IP domain name xxxx
!
IP inspect the audit trail
inspect the IP dns-timeout 10
inspect the name IP internet udp timeout 30
inspect the name IP internet tcp timeout 30
inspect the name IP internet ftp timeout 30
inspect the name IP internet http timeout 30
inspect the name firewall tcp IP
inspect the name IP firewall udp
inspect the name IP firewall icmp
inspect the name IP firewall ftp
inspect the name IP firewall http
Max-events of po verification IP 100
!
!
!
!
!
!
!
!
!
!
!
!
username xxxxxxxxxxxx
!
!
!
class-map correspondence vpn_traffic
police name of group-access game
!
!
VPN policy-map
class vpn_traffic
in line-action police 2000000 37500 pass drop exceeds-action
!
!
!
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 2
ISAKMP crypto key address xxxx xxxxx
ISAKMP crypto keepalive 10
!
life crypto ipsec security association seconds 28800
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac xxtransform
!
xxmap 10 ipsec-isakmp crypto map
defined peer xxxx
Set transform-set xxtransform
PFS group2 Set
match the address tunnelnetworks
reverse-road remote-peer
!
!
!
!
interface Loopback0
172.16.99.2 the IP 255.255.255.255
!
interface FastEthernet0/0
Description Connection to Internet (DHCP)
DHCP IP address
IP access-group outside_in in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the firewall on IP
automatic duplex
automatic speed
No cdp enable
xxmap card crypto
!
interface Serial0/0
no ip address
Shutdown
No cdp enable
!
interface FastEthernet0/1
Description of the connection to the local network
IP 172.20.2.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
automatic duplex
automatic speed
No cdp enable
VPN service-policy input
!
interface Serial0/1
no ip address
Shutdown
No cdp enable
!
IP nat inside source list nat - acl interface FastEthernet0/0 overload
no ip address of the http server
local IP http authentication
no ip http secure server
IP classless
IP route 0.0.0.0 0.0.0.0 dhcp
!
!
!
IP nat - acl extended access list
refuse any 10.0.0.0 0.255.255.255 ip
allow an ip
outside_in extended IP access list
allow udp any eq bootps host 255.255.255.255 eq bootpc
allow an ip host (ASA IPADDR)
deny ip any any newspaper
IP extended access list police
deny ip host xxxx any
deny ip any host xxxx
IP 172.20.2.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
tunnelnetworks extended IP access list
permit host 172.16.99.2 ip 10.0.0.0 0.255.255.255
IP 172.20.2.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
recording of debug trap
logging source-interface Loopback0
exploitation forest xxxx
not run cdp
!
!
!
!
!
Banner motd ^ CCCAuthorized technician!
^ C
!
Line con 0
line to 0
line vty 0 4
exec-timeout 5 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 5 0
Synchronous recording
entry ssh transport
!
!
endPlease check if this helps:
http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_crpks.html
Federico.
-
Need help to find the best online tutorial site
Could it please send a best PLSQL online tutorial site.
Advance thanks to you all.Please visit this site
Always good to visit the official oracle for reference.http://docs.Oracle.com/CD/E11882_01/server.112/e26088/TOC.htm
~ Franck
-
I need "VOTE" button for the contest on my site. What to do?
I have a MAC and Adobe Muse CC 2015 in it.
Survey or voting systems usually require a code on the server side.
I don't think you can do this in MU.
What programming languages does your hosting plan support?
Nancy O.
-
When I press play it continues normally but every clip I click the image looks like this... On OS X El Capitan 10.11 and 2015.0.2 first
Known issue with El Capitan.
Disable the MPE material in project settings for now.
-
Need help to remove the tablet of my site.
Goodday people!
On my website www.florissanttuinen.nl I clicked once on the site of the tablet. Just being curious. Nothing really happened and I forgot that I even clicked it.
Now, yesterday I wanted to show my site for a frind of mine on his iphone. But we couldn't access it properly. The only thing we saw was the background color. And then I started looking for the problem and it seems that he did. www.florissanttuinen.nl/Tablet/...
Now, I deleted the tablet thingie in muse itself and my folder public html on the server.
But still all phones and tablets are redirect to the compressed version that is not online much anymore the GET a warning.
Ive searched the entire site you if adobe but I think im you alone. And I hope that you guys have the awnser maybe to change the index or somthink to hand to stop phones and tablets the redirect to the site that isn't here yet atm.
TNX in advance!
Greeting from Sem
Here's a similar thread - http://forums.adobe.com/message/5086522#5086522
I think you could understand that the site seems to work well on an iPhone at my end and is not redirected to the version of the phone.
Thank you
Vinayak
Maybe you are looking for
-
Impossible to install SP3 on a Tecra M3
I am rebuilding a Tecra M3 model PTM30A-1DD002 for a friend. I installed Windows XP Professional, but whenever I try to install a service pack, it appears to hang. I tried SP1 & SP3 and whenever it starts gets about one minute in and then just sits a
-
Audio/video/internet buttons no longer work on Satellite A60
Since I erased all the computer "Refresh" it, I can no longer use these buttons. I used all the CD delivered to put everything back on the computer, but they still do not work... I really like to use them again, so if you have any ideas... I have a l
-
Resolution of the webcam problems
Hi all I finally decided me coming here on a resolution of the webcam problem: since Skype updates that followed the 6.2 version, I can't simply a resolution on my bodily proportions. In other words, I think that Skype automatically assigns to a reso
-
Someone configure Y570 WOL (Wake-on-lan)? I tried but no luck, thank you for any help.
-
I run Windows XP Pro and am fed up with my PC, switch to 'sleep' mode when I told him to stop. How can I change the settings so it stops completely instead of sleep mode? Please do not assume that I know computers - a complete manual would be better