TABLE import in the source and target OLAP and OLTP Informatica records

Similar Questions

• Is it possible to have the source and target schema in the same instance of DB?

  Hi all
  
  I'm using Oracle 11 g 1 material.
  I spent another source than with OWB server locations.
  In the course of deploy I get VLD-3064 and I can't deploy mapping due to the many warnings "table or view does not exist.
  
  Is it possible to have the source and target schemas in the same case?
  How to do?
  
  Kind regards
  Martin

  Hi Martin!

  1. the target schema have select rights for source-tables/views.
  (Run as a user with dba rights: grant select on to ;).

  2 «.. . none generated code will use the link dataabase...'.
  This is only a warning and means there is no need to use a database link. If your mapping will be executed faster as using a database link.

  error of VLD 3064

  Greetings
  Guenther Herzog

• Replicat breaks down. What new table added to the source

  Hi, I use a gr 10, 2 on Linux configuration (using the MA) and then a 11g. I have a setup of goldengate. Everything seems to work fine except when it adds a table to the source that it reproduces on target? and the replicat gets abbened-ed to restarting
  
  My param extracted
  
  -extract ext1 param-
  extract ext1
  TRANLOGOPTIONS LOGRETENTION DISABLED
  -connection to the database.
  username password XXXXXXXX XXXXXXXX
  -hostname and port for trail-
  EXTTRAIL/u02/gg/dirdat/ea
  discardfile /u02/gg/discard/ext1_discard.txt,purge
  DDL INCLUDE ALL
  table SCOTT.*;
  table HR.*
  package SCOTT.*;
  
  is my param replicat
  
  replicat Rep1
  -the source and target definitions
  ASSUMETARGETDEFS
  -connection to database target-
  XXXXX UserID, password XXXXXXX
  -file for dicarded transaction-
  discardfile mnt/gg/discard/rep1_discard.txt, append, megabytes 10
  support - ddl
  DDL INCLUDE ALL
  DEFAULT DDLERROR IGNORES RETRYOP
  : Specify the table mapping.
  map SCOTT.*, target SCOTT.*;
  
  Thanks for the help
  
  Published by: Aj05 on February 15, 2012 13:49

  Create a new table of test and follow his creation (or error) from source to the target. Scott on the target has privileges to create tables?

  In addition, check the syntax in your snippet. The line for HR is missing a semicolon. And what is your reference to use the PACKAGE in the excerpt?

• Data synchronization after restoring the database to the Source or target

  Hi DBAs,
  
  I've implemented replication unidirectional flow at the level of transactional database to the database schema (excluding some tables). It works very well without any problems after doing the tuning of flow with the help of health check scripts. My question is if some reasons, if I have to recover to the level of the database on the database Source then I need rebuild flows from scratch? Database size is close to 2 TB and after recovery, even using the pump data at the same time, it could take hours and also the source won't be available even after the recovery (data pump running job - if the source is online, then I was getting ORA-01555 errors and work was not).
  
  Please notify by above circumstances what is the best way to re - synchronize data between the source and target.
  
  Thank you
  -Samar-

  I would export of the datadict (build) once again, just to avoid any MVDD, something to do directly after the restoration of the DB,.
  because I'm not sure from the perception of this restoration DB in terms of DBID. Have you checked in rman if source db is considered to be the epitome?

  Then restart what are the messages in the target error queues. I think that you will have problems to move the first_scn
  due to differences on some YVERT in source/target system.logmnr_restart_ckpt$. system will think it has holes.
  You may need to manually remove a bunch of lines to allow the flow to jump on the fate of the YVERT
  that have been sent and are not present in the source system.logmnr_restart_ckpt$

• Composite video is not showing is not on the Source and program monitors

  Update Premiere Pro CC 2014 to v8.1 on my Mac Pro running OS X 10.9.5

  When the conversion and loading of a project that worked very well in the last version of first Pro CC 2014, the source and program monitors refuse to display video.  Why? It's terribly frustrating!

  Information on Mac:

  Mac Pro - 2 x 2.4 Quad-Core

  24 GB RAM

  2 x ATI Radeon HD 5770

  Mark thank you for answering my question.

  I ended up having to create a new project, select the the CPU processing, the old CPU project and Recheck in my preferences to import.  Unfortunately this update cost me 2 hours of time to fix as well for me and my client. Not impressed.

• What firefox is the source and the destination to be replaced?

  I want to use firefox sync, but I'm afraid to start before you know which version of firefox is considered the source and that firefox will be crushed. Now I want to overwrite the version of firefox on my laptop with the version on my PC. Eventually I'll probably want to reverse the process.

  The system will warn me how data is copied or used to specify?

  If you select Options > sync and then open the drop account, you will also have the ability to reset synchronization - reset sync to System i.e., you're on.
  There are three possibilities:

  • merge all data on the system with data synchronization
  • replace all data on the system with data synchronization
  • replace all data synchronized with the data on your system

  The first option - default - is probably what you are looking for. I've used so far, and he did me no problems, except for a case or two double entries - pwd obsolete against newer for example.

  Let us know if this helped!

• What is the important of the framework and what is its role?

  What is the important of the framework and what is its role?

  I guess you mean, NET Framework and its different versions.  It is a programming platform, some of your applications need this to work.  Instead of having to write completely every thing software developers scratch use so-called "frameworks" to ensure that their applications do certain things, for example, if you want to tell your program to save a file, just insert a little short of code that calls the framework to do real work, in this way, you don't have to write all the code to save the file and orders the programming for this platform.  Not only this saved a lot of work, he adds also in general more stability to the software that the programmer doesn't have to test and debug these programming functions that have been developed and tested by Microsoft, otherwise, it would be some sort similar to reinvent the wheel for each piece of software.  If you know a little more about programming, or on older versions of Windows 9 x, .NET Framework is like Visual Basic and the runtime libraries, it is a more recent incarnation of software platform.  It is best to not uninstall and play with these different versions, if you are part of your software may stop working.

  John

• Query metadata ODI to find the source and the target table for Interface

  Hi Experts,
  
  Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
  Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
  
  So, please give me with entries below:
  
  (1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
  (2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
  
  Kind regards
  Snehotosh

  First open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application

  SELECT count (distinct i_pop) of SNP_POP_COL
  where I_POP_COL in
  (
  Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
  in
  (
  Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
  Select i_table in the SNP_TABLE where I_MOD in
  (select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
  )
  )
  );

  Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.

• "An error occurred during the import of the source image"

  I used the Tech Preview of Workstation 7.0 and tried to import a virtual appliance (OVF), but it failed in the middle.  Whenever I would try to run again, I would get the error "an error occurred when importing the source image" without even trying.  As soon as I clicked "Import or Export" I get this message.

  Thinking something was just crazy with the Tech Preview, I went back to the Workstation 6.5.3 and tried.  I get exactly the same behavior - as soon as I click on import / export I get this error message.  I tried to uninstall and reinstall Workstation 6.5.3 several times and each time I still get the error.  I guess she feels that something is waiting somewhere, but I can't.  I deleted the keys to register HKCU and HKLM associated Workstation and reinstalled without success.  I also note that it keeps the virtual machines, that I created in my favorites after uninstall/reinstall, so I guess there is another location of this info I'm not delete.

  Can someone point me in the right direction?  At this time I'm looking for a new installation of the Workstation 6.5.3.

  While performing workstation 653 on Win7PE, I noticed the same behavior. Just by clicking on import/export will give the error. The papers say; "Win32 exception: unknown exception. He followed with procmon shows nothing interesting.

  Seems to be a bug.

  Joakim

• using the iMac 5 K and BM IO - source monitor changing 25 p 50 p causing black between the source and the program 4 s

  Reading in the source organization IMac 5 K using Blackmagic IO outputs 25 p 50 p monitor

  The effect is black as monitor re sync when I switch between 25 p 4 seconds the program monitor and hardware 25 p in the source monitor. Occurs on iMac 5K not MacBookPro.

  This happens with:

  Images 25 p in F5 Sony MXF DALYS and

  25 p DALY mxf op1a export agency

  Reading in the Source monitor is reported as 50 p BM Office video and monitor.

  A sequence created by dragging clips to create (so matching 25 p DALYS) reports it as 25PsF in BM (and so in 50i by monitor)

  Change the interpretation of the attached to the interlaced 30 frame can result in 60i and then adjusting to 25 fps may result in 50i, but this appears inconsistent.

  It's on an IMac 5 K use pilot 10.6.4 with El Capitan to CC2015.2 and day to day.

  This problem occurs both Ultrastudio 4 K and MiniMonitor (the reduced MiniMonitor the 50 p to 720/25 p

  The problem ONLY is NO PRODUCT with the same project/media/drivers/software/e/s on a MacBookPro.

  I don't know if it means a bug in the driver of the ORGANIZATION or the World Bank.

  Thanks for any help or the confirmation or not of this problem on a similar facility

  OK - after that the support of a lot of help from the world BANK has been fixed by trashing preferences (I used preference - Digital Rebellion Manager))

• Different size of the image in the Source and program areas

  Hello. This that is set to see the same in the Source mailboxes and the program? Picture of program box is magnified, so the Source image is missing.

  I have the setting on the widescreen 16:9 NTSC report. The two areas are defined on FIT. Thanks a lot version CS5. Janice

  Your sequence setting does not match your film "size".

  You probably need a HD sequence

• Button controls in the Source and program monitor

  I'm on a Win7 Professional 64 bit HP workstation, and since version 7.01 of first, the program and the Source buttons do not work.  Can add markers with the command "Add markers" "sequence".  Play, pause, fast-forward etc do not work from the buttons.  All access keys work, but the buttons are not.  Somebody else confirm?

  see you soon,

  Well that's not fair. You can try your prefs on launch of compensation. During the first loading, press Shift + Alt keys until the Welcome screen appears.

  Peter Garaway

  Adobe

  Premiere Pro

• In a table - looping through the rows and the stored procedure call

  APEX version: 3.2.0.00.27
  
  Hello
  
  I searched the forum and tried a few things but could not make it work.
  
  I have a tabular presentation, developed with the help of the ATD (Cascading LOV - method of tabular presentation - AJAX - ATD )
  
  What I'm trying to do now:
  -After submit and validations, loop through all the lines and
  -call a stored procedure passing 3 parameters obtained from each of the lines on the form of tables. This procedure will be an update of a database table.
  
  On the forum, I found that I could do the loop "* FOR i IN 1..." APEX_APPLICATION.g_f03. "LOOP COUNT *" syntax.
  
  Only for testing purposes, I tried just to view information with the following (On Load - after a footer) process (example of Denes Kubicek == > http://deneskubicek.blogspot.com/2009/05/execute-javascript-throuhg-plsql.html):
  

  declare
    v_today  varchar2 (200);
  begin
  --  :P40_test := APEX_APPLICATION.g_f03(1);
  --  :P40_test2 := APEX_APPLICATION.g_f04.COUNT;
    :P40_test2 := 100;
  
    v_today := to_char (sysdate, 'dd.mm.yyyy');
  
  --FOR i IN 1.. APEX_APPLICATION.g_f03.COUNT LOOP 
  
    :P40_test := APEX_APPLICATION.g_f02(2);
  
    HTP.p ('<script type="text/javascript">');
    HTP.p (   'alert(''Today is '
            || v_today
  --          || APEX_APPLICATION.g_f04(APEX_APPLICATION.g_f03(i))
            || '.\n'
            || 'end!'');'
           );
    HTP.p ('</script>');
  
  --    :P40_test := APEX_APPLICATION.g_f02(APEX_APPLICATION.g_f02(i));
  
  --END LOOP;
  
  end;

  The foregoing would give me a ' * ORA-01403: no data found * ' message. I tried through various variants of APEX_APPLICATION.g_f0* #*, but still can't get anything to display correctly. In commenting on all the lines referring to APEX_APPLICATION.g_f0x above, the date would be are they displayed fine.
  
  I tried uncomment the FOR... LOOP and play with the code (defining the process runs "On submit - after calculations" and Validations), I got was a ' * ORA-06502: PL/SQL: digital error or value: character conversion number error * "message.
  
  Here is the script of the form in a table:

  select 
  "V"."MSLINK",                                       -- hidden (number)
  "V"."INSTALLATION_DATE",                        -- editable date picker
  "V"."MANUFACTURER_INDICATOR",              -- editable (cascading LOV -- text)
  "V"."MODEL_INDICATOR",                           -- editable (cascading LOV -- text)
  "V"."DIAMETER_INDICATOR",                      -- editable (LOV -- number)
  "V"."PURPOSE_INDICATOR",                        -- editable (LOV -- text)
  "V"."VALVE_NUMBER",                                -- shown but not editable -- number
  "V"."MODIFY_DATE",                                  -- shown but not editable
  "V"."MODIFY_USER",                                   -- shown but not editable
  "V"."VALVES_STYLE"."FEATURE"                  -- shown but not editable -- number
  from "#OWNER#"."VALVES" "V"
  Where
    "V"."PROJECT_ID" = :P1_PROJECT_NUMBER AND
    "V"."VALVES_DFLAG" = 0

  Regarding the parameters for the stored procedure, it would the MSLINK, VALVE_NUMBER and the VALVES_STYLE. FEATURE.
  
  Help, please!
  (Sorry for the long post).
  
  Thank you
  
  Tan

  Hi, Tan,

  I have not seen that type of object - I've only used custom types for purposes of test years ago and have never used their within Apex!

  One possibility is that the value of checksum being is based on all of the content of these fields, rather than only the part of the FEATURE. If there are other parts of the object, you could include those items as well.

  Otherwise, as you f01 KP for a record, you will need to retrieve the values of the FUNCTION in your PL/SQL code directly from the table (because the user cannot modify these fields, you can be sure that the values in the table will be still valid).

  Andy

• My speakers produce an ear piercing rumble sometimes that does not seem to be associated with a particular activity. Any ideas as to the source and the possible fix?

  It seems that the problem associated with my video/audio card that has been recently replaced due to the failure of a similar video/audio card earlier.

  (ViXS Pure TV-U4888 NTSC/ATSC Combo).

  Hi G_N_P_HL,

  1. did you other changes on the computer?

  2. when the problem occur?

  3. when and how does the ear piercing rumbling stops?

  First, make sure you don't have any programs or applications or in the course of performance when the problem occurs.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

• I have 50 40M each places.sqlite files. Can I remove the "old" and firefox stop recording of older than the most recent files, while retaining history?

  Thank you.

  It's not bad.

  These files are all in the same Firefox profile folder?

  They have the name of places.sqlite or is there something added?

  You only need one of them and this is the file that Firefox currently uses to store the history and bookmarks.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/