version lockbox to the command line client

Similar Questions

• Parameters of the command line client infrastructure?

  Hi all

  I will know if it is possible to pass to VpxClient.exe ip address/host name of the ESX Server, in order to directly connect to the specified host.

  Or, is available if any tool (not VirtualCenter) for a list of all my ESX server to open the client.

  Thank you

  concerning

  Davide

  Check out this link http://itknowledgeexchange.techtarget.com/virtualization-pro/configuring-single-sign-on-to-log-into-virtualcenter/ which will allow to configure SSO and to have the option you are looking for

  Steve Beaver

  VMware communities user moderator

  ====

  Co-author of "VMware ESX Essentials in the data center" virtual

  (ISBN:1420070274) Auerbach

  Come and see my blog: http://www.thevirtualblackhole.com/

  *Virtualization is a journey, not a project. *

• How to install Adobe Acrobat Reader DC version 15.010.20060 silently through the command line?

  Hi, I downloaded Adobe Acrobat Reader DC version 15.010.20060 exe. I want to install silently from the command line. I run the following command /sAll /msi EULA_ACCEPT = YES/SB install.exe. I can get it to install, but not entirely in silence. Progress bar shows and after finishing he invites an OK button and opens up a new site at the end is there a way to get it to install in completely silent mode through the command line?

  Hello

  Please try the below perimeters, he works for AcroRdrDC1501720050_en_US.exe. I installed completely silent.

  /qn EULA_ACCEPT = YES AgreeToLicense = Yes RebootYesNo = no /sAll

• How to get the version of Flash Player via the command line

  I have about 350 remote computers across the country I have to administer via SSH only, I'm looking for a way to the command line determine the version number of Flash Player on a computer.  Simple commands to find it?  Or via Reg Query?

  Thank you

  We provide a number of mechanisms for deployment and update of Flash Player in a managed environment.

  Check out the guide to the system administrator for more details:

  Adobe Flash Player for Flash Player Administration Guide | Adobe Developer Connection

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• sqlplus connects well with SID on the command line, but not with setora

  I can connect to my database using sqlplus if I specify the SID on the command line; However, I get an error if I try to connect after using setora to set the SID. Any ideas on why this is happening?
  
  Oracle version is 10.2.4.0
  OS is SunOS 5.9 Generic_122300-46 sun4u sparc SUNW, Sun-Fire-V490
  MYDB resides on a host machine that is different from the one where I'm under sqlplus. We'll call this REMOTEHOST machine.
  I am sure that MYDB is running on REMOTEHOST
  

  MYUSER@MYHOST% setora MYDB
  MYUSER@MYHOST% sqlplus MYUSER
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 8 09:38:58 2010
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  Enter password:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 Error: 2: No such file or directory
  
  
  Enter user-name: ^C^C
  MYUSER@MYHOST% sqlplus MYUSER@MYDB
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 8 09:39:10 2010
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  Enter password:
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> quit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options

  Oracle environment variables:
  

  MYUSER@MYHOST% env | grep -i ora
  PATH=/u01/home/bin:/u01/app/oracle/product/10.2.0/OPatch:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/lib/cobol/bin:/usr/ccs/bin:/opt/SUNWspro/bin:/banvol/uncg/bin:/etc:/usr/openwin/bin:/opt/hsqr/ora/bin:/opt/hsqr/jre/jre141/bin:/u01/app/oracle/product/10.2.0/bin
  SQRDIR=/opt/hsqr/ora/bin
  LD_LIBRARY_PATH=/usr/ccs/lib:/opt/lib/cobol/lib:/opt/SUNWspro/lib/v9:/opt/SUNWspro/lib/v9:/opt/SUNWspro/lib:/u01/app/oracle/product/10.2.0/lib:/opt/hsqr/ora/bin:/opt/hsqr/jre/jre141/lib/sparce/native_threads:/opt/hsqr/jre/jre141/lib/sparc/client:/opt/hsqr/jre/jre141/lib/sparc:/u01/app/oracle/product/10.2.0/lib32
  ORACLE_BASE=/u01/app/oracle
  ORABIN=/u01/home/bin
  OWB_HOME=/u01/app/oracle/product/owb102
  ORACLE_SID=MYDB
  ORACLE_HOME=/u01/app/oracle/product/10.2.0

  TNSNAMES entry:

  MYDB =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = REMOTEHOST)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = MYDB.MYDOMAIN.COM)
      )
    )

  TWO_TASK = MYDB
  Export TWO_TASK

• 10.11.5 only stops the command line

  I have an iMac late 2013 and since the public beta 1, up to the final version of the published 10.11.5 today, my computer just stops or restarts from the command line. There is no problem on 10.11.4.

  Please, what can I do?

  Quit all applications and then disconnect all external devices except the mouse and keyboard and try a stop

• 10.11.4 update has failed because of the command line tools

  The 10.11.4 update fails with a message on the command line tools.

  I found this in system.log.

  Memento kernel [0]: sandbox: softwareupdated (329) deny system (1) - 682f fsctl

  181Mb Command Line Tool for Xcode 7.3 keeps reappearing in the section "updates" from the App Store, 10.11.4, as well as the global update apparently cannot continue.

  Normally, you should be able to select the updates separately (click on "More... »). If this does not work for some reason, you can download the 10.11.4 update by itself: download OS X El Capitan 10.11.4 updated

  (Combo version: Download OS X El Capitan 10.11.4 Combo Update)

• Analyzer of sequence running from the command line in TestStand 2010

  Hello

  I would like to be able to run and control the stand-alone command line sequence Analyzer.  I can do that in 2014 TS (and it seems that I could patch versions as soon as 2012 TS to give them this ability), as described here: http://digital.ni.com/public.nsf/allkb/B927893F26BFB64A86257ECE006E442D

  However, I work with a large existing codebase in 2010 TS (with no intention to migrate to a newer version, in the foreseeable future).  Is it possible to get the same functionality from command line in the 2010 version of the parser?

  I know that I can open the command line parser, but are the commands, I am interested in: analyze, report, / save, /clearMessagesOnSave, / minimize, / help, / / leave.

  Thank you!

  Thanks Ryan, Jigg,

  Yes, I can run the parser (and opened a project), but basically, I can't run anything.

  I realized what I do by writing a TestStand sequence that calls the parser to sequence through its API (attached).  I can then run TestStand (and call this sequence) from the command line.

• What a privilege is necessary for the judgment on the command line?

  I just finish to manage a bunch of files, something I think is sometimes easier to use a MS-DOS prompt with wildcards with. I wanted to put the computer power off and goto bed. I was connected with my normal user account when I published the shutdown command from the command prompt that I used instead of the mouse. To my surprise, I received this message:
  E:\Shared>shutdown s
  The operation completed successfully.
  A required privilege is not held by the client.

  I can understand this restriction for remote clients, but not for the users of the console. What privilege or registry setting would I need to activate this command works for all users of the console? It seems stupid when they can just as easily use Start-> turn off computer-> Turn Off power.

  I'm also surprised with this if the first time I tried it as a regular user in all these years. I use XP Pro, so I can change the local security policy and the security policy templates.

  Can I stop my system with an account standard account standard Windows XP SP3 in command prompt. Was curious when I saw your post.  I'm sure you have checked user account rights.  You have another user account to test?  I would create a user if you have not just to see what happens.

  Just found this, shows your exact error trying to shutdown from the command line.

  http://www.windowsnetworking.com/kbase/WindowsTips/WindowsXP/AdminTips/utilities/Cantshutdownfromcommandline.html

  If you have a Windows XP desktop computer and you try to stop your machine from the command-line by typing shutdown-s you might get the following in response to this command result:

  The operation completed successfully.
  A required privilege is not held by the client.

• Create shortcuts with the command line switches

  I have three versions of Word on my computer. (I know, I'm a masochist).

  There are times when I want to run one of them in safe mode. Those who get me if I run winword.exe /a in the run window let you guess.

  I know I can get it by including all the way, but it's a pain.

  I would like to make a few shortcuts in Windows that would do this for me. However, I don't know how to add the command line switches. I used to be able to properties (similar to editing a .pif file) but it doesn't seem to be an option.

  You * need to locate executable files and create each shortcut via right click on the executable file.  Shortcuts Microsoft Office may not be "real" classical shortcuts

  Right click and change the shortcut.  In the 'Target' box, add at the end command line switch.

  For example... I found the 64-bit Microsoft Office 2010 Word executable here:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  and created a shortcut on my desktop.  The "target", said:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  I added the / a that you pointed at the end, the target is now:

  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» "EXE" /a

  In fact - the after typing all that above, I realized that there is a Microsoft Knowledgebase Article... Google worked and I do not use it.  Heh

  How to use the line switches of start command to start Word 2010, Word 2007, Word 2003, Word 2002, and Word 2000 (Method 2).

• Uninstall all the Vista service packs under the command line

  I'm under Vista Business on a MacBook using Bootcamp. I could not restart successfully since it crashed (blue screen/memory image) and I am only able to boot from the Vista disc. I tried a variety of repair (points, connecting the command-line etc. of various tools for restore) and any options the these were unsuccessful.

  I decided that my next course of action is to reinstall Vista on top of my files and settings using the options of installation and upgrade from Vista installation disc.

  I encountered a problem in that the upgrade option is not available and I understand that it is because the service pack (installation completely up-to-date) version that I am trying to upgrade is newer than the version on the installation disc. I obviously need to uninstall all updates so that it works, but the only way I have to do this is the command line.

  I don't know the syntax to do this, and several examples I found online do not work. Can someone help me with this - it would be greatly appreciated! As this is a Bootcamp installation I can access the Windows partition from the partition of the Apple OS if I need to check the locations of files etc.

  Thank you!

  Hello

  in Vista, you do a repair within a vista operating system installation; don't not booting from the vista DVD

  It has changed the way XP to do

  read what does apply to you that you can't get to a vista OS with

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  SP levels apply to the above

• Win 7 64 bit is the command line 32-bit or 64-bit?

  Win 7 64 bit is the command line 32-bit or 64-bit?

  Win 7 64 bit is the command line 32-bit or 64-bit?

  Hello

  There is a 32-bit and 64-bit version of the shell (cmd.exe) and is the same for some of the other main components of the system, such as the Publisher of the registry (regedit.exe).

  That the one you use depends on how you start the shell. If you start the shell in one of the normal ways, for example by typing cmd.exe in the Run dialog box type cmd.exe in the start/search box, etc, then you would use the 64-bit version.

  To start the 32-bit version of the shell, you must specify the path. For example from the Run dialog box, type C:\Windows\sysWOW64\cmd.exe or the same path in the start/search box.

  If you often use the shell, it's a good idea to customize the 32-bit version which makes it easier to see that it is running. I changed the background color of the 32-bit version of a medium blue. In this way there is no doubt which I use.

  It is also important to note that each command you use either version are tackling the same version of system files that are involved with this command. For example if you type regedit.exe in each version, you will get the same version of bits of the registry editor.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• CAP of the command line and the 8800

  I have a terrible time this morning trying to release some software for the Blackberry 8800. In our generation, we have been calling the compiler of Cap 4.3.0 of the command line (which I always have loads of doubts) generating a cod file and unzip for OTA deployment. It worked ok for 8830 phones so far. Once we started to try to do the same thing for 8800 phones we hit a major roadblock. We started to experience random errors when loading our application on the device. (The problem is also reproduced in the AT & T 4.2.1 emulator.) Sometimes the application will work but only on a particular plu model Cingular blackberry where as our QA guy has a bit newer model phone. The application will also work if it is compiled using slightly different source code. The source code that causes a failure will run when compiled and loaded on the same device a build running with the other working source code. After attending the recent virtual conference, I learned that the compiler is not backward compatible. In other words, the CAP generated 4.3.0 cod files will not work on devices with an OS older than 4.3.0. My immediate reaction was to return to the version of the CAP to 4.2.0 and try again. I hit another block when I started having:

  WARNING! : no entry point found
  com.mypkg.MyMidlet: WARNING! : no definition not found [INFO] com.rim.resources.MyProjectRIMResources: error! : class: com.mypkg.MyMidlet has no members:

  So, I upped the version 4.2.1 retries and still got the error. Compiler error goes away with the 4.3.0 CAP but I'm not confident to go into production by using this compiler and targeting the older operating system. I use the same exact command line parameters in both cases. (I pass the flag - midelt and MyMidlet has a public ctor). Can someone tell me what has changed between 4.2.0 and 4.3.0. Y at - it another option or another flag that I have to give. Research on the error, suggests that the old compiler assumes a CLDC application instead of a Midlet. Could someone also explain if there is a problem to start the 4.3.0 SignatureTool.jar against the binaries generated by older Cap (if ever make us it work), targeting older OS 4.2.1? I am desperately looking for answers... Thanks in advance!

  This highlights a problem with Java environment.  Please see the link below for more information.

  Support - i/o Error: CreateProcess
  Article number: DB-00081

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/support...

• Windows 7 does not recognize 'change' in the command line

  When you use the command line I try to go to edit to create and edit files, but windows 7 is not recongize edit as a command internal or external, why and how do to the command line editing window.

  The 64 bit version of Windows 7 is not the editprogram (but the 32-bit version only).

  You can run Notepad from the command line.

  Boulder computer Maven
  Most Microsoft Valuable Professional