Windows 7 does not recognize 'change' in the command line
When you use the command line I try to go to edit to create and edit files, but windows 7 is not recongize edit as a command internal or external, why and how do to the command line editing window.
The 64 bit version of Windows 7 is not the editprogram (but the 32-bit version only).
You can run Notepad from the command line.
Boulder computer Maven
Most Microsoft Valuable Professional
Tags: Windows
Similar Questions
-
Once more, Microsoft has outdone himself. The previously blindingly simple and obvious has been complicated to make incredibly frustrating and painful for users of the new version of windows. Why in the world 1/2 old software CD automatically recognized by Windows 8 and the other 1/2 no? None of these programs and their CDs are particularly old or dated. Worse still, I have a Canon printer and rickety Windows 8 will not load automatically when I insert the installation CD. And windows does not show the CD when I do a search in D: drive. How and why are you people so incompetent? I'm sorry to be rude and mean, but seriously. The whole bloody point of tech and people like you is to operate more easy is DO NOT IMPOSSIBLE, TIME CONSUMINGLY DOULOUREUX.
Hello
Just kind of guessing here, but you could browse through your control panel... "AutoPlay" settings and see if it can just be a problem with setting...
Another possibility is that one of your programs blocking access to some of the CD...
Some programs have the option of 'Ownership' of your drive, for lack of a better description...
iTunes can possibly do this and some CyberLink programs... There are other institutions...
Another possibility is that some of them may be blocked by Windows because of compatibility issues...
Some windows updates do precisely that for some programs.
-
Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd
I am the administrator also have an account invited and created another user account to see if this helped (she didn't)
Hello
If you use the command prompt, you must bring up the command prompt.
Go in Start / All Programs / Accessories.
Click on the command prompt and select run as administrator .
Concerning
-
Original title: USB device not recognized
Over the last 2 weeks, I get a message on a USB device. The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port. I have no idea what it means. I hesitated to first click the icon (it does not last very long) thinking it could be a scam. Can someone help me? Thank you.
Hello
(1) is the specific question of specific USB devices?
(2) did you of recent changes to the computer before the show?
(3) have you tried plugging the USB stick on another computer?(4) what is the brand and model of the computer?
I suggest to refer to the following methods and check if it helps to solve the problem.
Method 1: Hardware devices do not work or are not detected in Windows
Run Microsoft Fixit mentioned in the article.
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2: USB Port may stop working after you remove or insert a USB device
http://support.Microsoft.com/kb/817900
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows
Reference:--
Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575
-
Windows xp does not recognize the hp c6180 photosmart printer
My windows xp does not recognize my hp c6180 photosmart printer
Hello
1. were you able to use the same printer without any problems before?
2. don't you make changes on the computer before this problem?
3. you receive an error message?See the following articles that may help you resolve this problem.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsResources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028 -
Windows 7 does not recognize external hard drive after the reboot
I just bought a WD external hard drive. I plugged in the USB port and automatically loaded everthing. I even registered the product. Then I was told that there was an update to the external hard drive. I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive. I had another hard drive that I used where Windows 7 does not recognize it either? Is it some sort of security setting, I need to adjust on Windows 7 64 bit? Please notify.
Check if the hard drive is assigned to a drive letter in disk management.
Click Start, right click on computer
Click on management of
Expand disk management
Select your external hard drive if its posted here
Make a right click paths and change drive letter
Restart your computer, open the computer in the start menu and see if it shows then.
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Install Windows 8 does not recognize the system drive
I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.
Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.
The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.
I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.
Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.
This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.
Thank you in advance for any assistance.
Windows 8 Pro 64-bit (full version) - OEM
Intel Core i5 - 3570K
Card mother GIGABYTE GA-Z77X-UD5H
Crucial Ballistix 2 x 8 GB DDR3 1600
Crucial M4 2.5 "128 GB SSD (system disk)
WD Green WD30EZRX x 4 (data readers) 3 TB drive
Rosewill Challenger-U3 ATX Mid Tower Case
SeaSonic M12II 620W 620 Bronze PSU
ASUS DVD writerThe DSS must be LOW LEVEL FORMATE.
Once, there may be no other [HDDs] not connected to the SATA ports.
Install Windows 8 Pro now.
[Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.
-
WINDOWS 8 DOES NOT RECOGNIZE THE SCANNER OFFICE HP OFFICEJET 4500
MY WINDOWS 8 DOES NOT RECOGNIZE SCANNER OFFICE OF HP OFFICEJET 4500
Hello
1. don't you get any error message when the scanner not detected?
2. do you insert scanner in another port of the computer or to another computer?
3. were there any changes (hardware or software) to the computer before the show?
4. other recognized devices?
If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
Run the hardware and devices Troubleshooter and see if it helps.
a: press the logo Windows + O to open the search box.
b: Type Troubleshooting, press on enter.
c: now click material and its.
d: now click hardware and devices , and then click NextAnswer please if you have any questions.
-
Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.
Disconnect all USB storage.
Run this tool by do right click and choose 'run as administrator '.
Of course, all first extract it:
http://www.Uwe-Sieber.de/files/drivecleanup.zip
If your XP is 32 bits, use the Win32 folder.
Reset.
If you still can't find the drive, assign it a drive letter in disk management.
-
Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red
original title: Sony Walkman NWZ-E344 Media Player Red
My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.
Hi brumbybrat,You must install the drivers for the walkman to recognize.More information is available in the following links: -
Windows 7 does not recognize the graphics cards
I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.
In "Device Manager", it shows two units operating as VGA standard with no details etc.
It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.
Any ideas or help... Please also stay simple for a non PC Geek
No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)
It of free and worth to be using,
-
I have a Dell InspironM5010 with Windows 7 installed and you want to use a Dell 725 printer with it. I have the CD with the drivers of the printer, but can not load as the computer tells me that Windows 7 does not recognize
Original title: ask the community
Your CD is too old, but you can be lucky...
Is there a downloadable file here for your printer...
http://www.Dell.com/support/troubleshooting/ca/en/cadhs1/product/Dell-725
.. but this is for Windows 7 32-bit ONLY, and I have the feeling that your OS is 64-bit.
Windows may have a driver somewhere see here for how to find...
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
-
I have a very strange problem.
I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.
So, I bought a new generic keyboard.
The problem
1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.
2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.
However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.
It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.
I tried many things
1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.
2. I tried using different USB ports on the desktop. He has not made a difference.
3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).
4. I tried to start Windows in safe mode. That did not help at all.
Any help would be greatly appreciated.
Hello Pauliw,
Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.
You can try the steps in the following Microsoft article and see if it works for you.
Note: There is place for Windows 7 also.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.
Click Start
In the Search box, type command prompt .
In the list right click on command prompt and select run as administrator.
At a command prompt, type the following command and press ENTER:
Set devmgr_show_nonpresent_devices = 1IN the following line from the command prompt, type the following command and press ENTER:
Start devmgmt.msc.When the Device Manager opens, click on view
Now, click Show hidden devices.
Remove all the entries that exist for the keyboard and the USB category.
Close Device Manager , and then restart your computer.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port. Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is. Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7. But the installer does not work.
Windows 7 Professional 32 bit.
Hello Graboots,
Thank you for your message. You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer? You can try using a different cable, for this rule as well. Since it is a question of recognition, we remove the external devices before software troubleshooting. Do you get anything when you plug the printer (ie. a tinkle of connection)? Please let us know, we are looking forward to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please
Name of the operating system Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Manufacturer of operating system Microsoft Corporation
System name HANDSOME-PC
System manufacturer LG Electronics
System model C500.-g. AEE5GE1
System Type X 86-based PC
Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors
H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10
Product key:
X 16-96084
CONCERNING
TUESDAY BIOJY
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
Maybe you are looking for
-
Error 501, number error 0X800CCC79 every time I try to send and email.
IError501, Ox800ccc79 error number. I have severError501 and the error number Ox800CCC79 every time I send E-mail. I need help, please.
-
Keyboard HP Envy 17 spits out several key with a simple pressure on
Have a problem with the keyboard on the HP Envy 17. There are three keys which, for some reason, has stopped working. The 'o' key product zero, key, left the House, period, 'o' and 'p '. The "L" produced three key, period, PG., six, 'l' and semi cole
-
Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from th
-
Problems with Maxx Audio after Windows 10 'upgrade '.
It seems I'm not the only one with this problem. I use a laptop computer Inspiron 17R 5737 provided with Windows 8.1. After upgrading to Windows 10, I noticed two things: 1. audio Dell, my Waves Maxx Audio 4 works, but miss me all my presets in the Q
-
I bought windows 7 online but I got a product key
I bought windows 7 online and updated my pc which has vista on it, but I never received my product key in an email and now windows asks me to activate, but I have also... a product key during installation that never asked me a product key...