Version number of software / software build ID

Similar Questions

• Software build ID number

  Hi all

  Was wondering if I could get help find my version number of the software.

  HP Probook 6540 b, running under Windows 7 64-bit.

  Ctrl + alt + s and fn + esc shortcuts do nothing. I tried the key + R shortcut Windows as well and I got the version number of Windows, but what I need is the version of HP software ID number. [Too easy to confuse the two...] I keep reading, it must be printed on a label somewhere, or in the battery compartment, but I can't seem to find an example of this issue online, so I'm not 100% sure exactly what to look for. [He mention, by chance?]
  
  If anyone can help me with this, I would appreciate it!

  
  __________________________
  
  I work on behalf of HP

  OK, I did some research more and reading and I'm sure it's a device that appears only on HP desktops and not notebooks. Sorry for the goose hunting wild, everyone! Thanks for your help!

• What is the latest version of the software available?

  Hello

  I would like to know what is the latest version of the software available for my Motorola Photon.

  When I go to the programs 'Settings' and select 'about this phone"I get the version provided with it from the factory:

  The system version: 45.2.3.MB855. Sprint.en.US

  Android Version: 2.3.4

  Baseband version: N_01.28.03R

  Webtop version: 1.2.0 - WT-135

  Kernel version: 2.6.32.9 - 00027-geb0ab2d eaz002@fl36bld22 #2

  Build number: 1_SUN-154_MR-A-1 4.5.1

  Version of the ERI: 6

  PRL version: 53114

  Thank you very much for this information!

  Oops, the serial number in my profile was for my old Photon that I had replaced. I updated my profile to reflect the unit I have now.

  The system version: 45.2.5.MB855. Sprint.en.US

  Android version: 2.3.4

  Baseband version: n_01.28.05s.fk

  Webtop version: 1.2.0 - WT-135

  Kernel version: 2.6.32.9 - 00032-g60a2e4b eaz002@fl36bld22 #2

  Build number: 4.5.1 A-1_SUN-154_5

  Version of the ERI: 6

  PRL version: 53115

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2 but I can not Airpay icon on the menu bar of my mac to turn blue when I select the apple TV conn

  I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2, but I can't get the Airpay icon on the menu bar of my mac to turn blue when I select the apple TV connected to a HD from LG smart TV. Help!

  Hi, Arghbee1.

  Please visit Apple support communities.

  I understand that you are unable to AirPlay from your Mac to your Apple TV.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you do not see the AirPlay icon , make sure that your Apple TV is awake and that it meets the system requirements.

  If you do not see your Apple TV in the AirPlay menu, make sure that your Mac and Apple TV comply with the system requirementsand your software from the Apple TV is updated. Also check your firewall settings:

  1. Choose the Apple menu > System Preferences, click Security & Privacy, and then click the Firewall tab.
  2. Click the lock icon and enter an administrator name and password.
  3. Click Firewall Options.
  4. Deselect the option "block all incoming connections".
  5. Select the option "automatically allow signed software to receive incoming connections.

  If your office does not look great on your HDTV, high-definition TV could apply image quality improvements that are not the best for the computer images. Check the manual of your HDTV for more information on how to adjust your HDTV settings for use with a computer. Your HD TV could offer a more appropriate display mode, such as the computer or game mode mode. Also try adjusting the HDTV settings like sharpness, retail building and noise reduction.

  If you mirror your screen and the image correspond to your HDTV screen, you can adjust the size of the Office for the best image. Click the AirPlay icon, and then select an option under "game size desk to." If you fit to desktop size to your Apple TV, the image fills the screen HDTV but will not look as good on your Mac screen. Learn more about overscan and underscan and what you can do about it.

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  See you soon

• ITunes is to be ridiculous. I updated my iPhone 6 s to the latest version of the software, 9.2.1 a week ago. Not perfect, no problem whatsoever. However, whenever I plug my phone into my Mac, Itunes wants to upgrade the software again. How can I stop this

  A week ago. I updated my iPhone to IOS 9.2.1 6s. The update was done with success directly on my phone via wifi.

  I had no problem with the software of the phone since.

  However, every time I plug it into my Mac Mini and open Itunes, now a pop up appears asking me to upgrade to the same version of software.

  I have no idea why this happens and how the hell I let itunes know that I've already updated?

  I have the iPhone 16 GB S6 with the latest version of the software: installed 9.2.1.

  Any help would be appreciated. Please note that I am a Luthier and build guitars. I'm about like a fish!

  Barry.

  A version update of iOS 9.2.1 is out to solve a problem with error 53 and replaced the sensors contact ID - if your phone is already on iOS 9.2.1 is without doubt the old version of it, not a new. As far as I know the new version will be only detected by iTunes from the computer, not directly on the phone in settings > general > software update.

• Version of the software Cisco Wireless LAN controllers & Licensing (controllers HA and APs Adder & licenses basic questions)

  In fact, one of my clients has two Cisco 5508 wireless LAN controllers installed in a site and back up and running now. one of them running software version 7.4 and the other running software version 7.6. Each of them works as a stand-alone controller with number of access points. Based on this scenario, answer below concerns:

  • Can we transfer all active licenses at one of them and use it as a HA free of charge?

  • Up to which version of the software, we can improve these controllers without any extra charge?

  • What we must do if we want to move two of them to version 8 software?

  Waiting to hear from you soon about my concerns.

  Here are a few notes:

  -Only licenses Adder can be reheberges to another controller. Base license cannot be rehosted unless the unit is THAT RMA would be.

  -Too long the WLC has a minimum of 50 access point license, so that the unit can be used for HA N + 1 or AP SSO.

  s ' it use SSO of AP, the WLC must have connections to subnets for layer 2 even due to the IP address of the interface.

  HA N + 1 can be used in sites different especially if the subnet do not align

  -Scott

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Must I first uninstall previous versions of adobe software when I install a new version?

  I use creative cloud for a few years now and have always wondered why would I need a previous version of the software. Whereas these unused software versions are just sitting on my hard drive and too much room... can anyone think a good reason why I should not uninstall these older versions of software Photoshop, Illustrator, etc. ?

  Thank you, Tom

  It can depend on which versions are these older versions.  If these are versions of cloud so I don't think hesitated to get rid of the older ones.  But if they are of a Creative Suite if you think they have features that the newer versions were stripped of their Flash, for example, had a number of useful components ripped out of it when they came out with the version of cloud.

• Where can I find the latest version of the software to download on my iPod Classic 160 GB end of 2009?

  Where can I find to download the latest version of the software for my iPod Classic (160GB end 2009)?

  I'm still enough of a novice at this and would like to, if possible, a detailed response. Really appreciate it.

  Thank you

  Mando

  Click here and follow the instructions. The entire process is managed within iTunes. you don't need to search for the download.

  (144457)

• When I go in Firefox it says I have the latest version of the software but I 29,0 so how can I remove this warning.

  Whenever I go to Firefox, I get a message that says I don't have the latest version of the software. Why do I get it? The next screen says that you have the latest version of the software. Do not understand what is happening.

  The old Google Firefox page has not been updated since the time of Firefox 3.6. So, if you really like this page, I think you're stuck with this message.

  From Firefox 4, the default homepage is Subject: House which is a page generated internally.

• Is possible to install and play a game that requires an older version of the software?

  Is possible to install and play a game that requires an older version of the software? I get the message "cannot open the application because the classroom environment is no longer supported.

  It does not say "classic environment is no longer supported", by chance?

  If that means he needs OS9 or earlier, or possibly 10.5.8 which has Rosetta, a Classic emulator.

  What is the name of the game?

• What is the new version of the software for iPad pro

  What is the new version of the software for iPad Pro

  TThe latest version for the new iPad 9.7 Pro is iOS 9.3.1. Apple pulled iOS 9.3.2 for this device because there were some problems with it and they have not released a fix yet, if you have the bigger iPad Pro, it is 9.3.2.

• When you try to update the latest version of the software my ipad is locked with Update verification

  I tried to download the latest version of the software and received a message on the screen that says 'verifying update' and now I can't do anything. Screen is locked with the message "check update" and I can't even turn off the machine

  Force the restart: press home and locking the buttons for 1 minute, releasing when the Apple logo appeared.

• I've updated to the latest version of the software iOS overnight last night and now I can't access email on my iPad mini or Safari. When I go into the settings, click the software update that is displayed simply endless turns.

  I've updated to the latest version of the software iOS overnight last night and now I can't access email on my iPad mini or Safari. When I go into settings, a notice is displayed under the general rubric that there is 1 available software update, but when I click on the link for the software update, it runs just endlessly. I am not able to connect to the WiFi (nothing happens when I click on the WiFi button). Did not have this kind of problem before. Thanks for any idea.

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold the two for up to 30 seconds until you see the apple logo.

  Then try update on your WiFi

  See you soon

  Brian