Do not start and stuck dvd

Similar Questions

• Does not start and stuck at "loading ExporterQuick TimeHost.pm.

  Hello

  I just upgraded to CS4 CS5.5. First aid for centuries, but when I just changed all the time it crashed and when I tried to start it again it loads to stops at the "loading ExporterQuick TimeHost.pm.

  

  I just changed a HD 720 HD 1080 with project. Images MOV and had several clips in my bins. Was a little slow after a while, so could be the amount that it crash. He worked and put on very well before the crash, and QuickTime is installed and updated.

  I tried put in service again and again, but without success

  Everyone? Thanks for your time! : D

  See the suggestions here:

  http://blogs.Adobe.com/toddkopriva/2011/02/troubleshooting-QuickTime-e rreurs-with-after - effects.html

  Which was written for After Effects, but the same suggestions apply to Premiere Pro, too.

• Satellite A100: Does not start a recovery DVDs

  Hi guys.
  First timer here.
  I have read some of the Q & A on reboot problems the A100 since the recovery DVDs.
  It seems I have the same problems as keith.

  I want to start all over again the OS and my laptop does not start from the DVD.
  Tried the standard f12 boot from cd option. tried her "hold C on the boot option.
  Both options end with no joy.

  The screen that says "loading ramdisk image", loads the machine breaks, asks me to wait, then every time the same thing.
  The screen goes black, flashes very quickly and white and then loads from the hard disk as normal.

  Now try to hold my frustration and do something radical.
  I know that in the Q & A previous, the subject is considered as replied...
  other options?

  My following thoughts are to delete/uninstall almost every thing and try and force the thing to boot from the DVD.
  have also copied the dvd and tried to boot from the copy, always with no joy.

  Are there any other suggestions?

  Is it possible to put a partition in the existing drive and start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?

  is it possible to close all essential processes and format the HARD drive?

  is it possible to reset the HARD drive somehow?

  see you soon,
  Martin

  Hello Martin

  To be honest, it's pretty strange question. There is one thing I am interesting for:
  Is - this first time, you try to use a recovery media for the installation of the OS?

  If possible, try to get the Microsoft CD/DVD facilities to see if the same thing will happen.

  In any case, I will try to give you answers to your questions.
  > Is it possible to put a partition in the existing drive and to start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?
  It will not work. On the recovery of the media it is recovery image and this image must be installed correctly. You cannot "recover DVD in there. Not question

  > is it possible to close all essential processes and format the HARD drive?
  I would like to know what you understand under the 'essential processes?

  > Is it possible to reset the HARD drive somehow?
  You can't do this somehow. If you want to 'reset' HARD drive, you must delete the existing partition or delete any OS installation. After having done that, you need to install new OS. All this will be done at the beginning of the recovery procedure.

  I really don't understand what's wrong there. Please answer to my first question, and we will continue this discussion. ;)

• Satellite Pro A60 will not start up CD/DVD

  I have the above and it does not start from cd/dvd. I know that the cd/dvd is bootable and works well. I can boot from the floppy drive and access the cd/dvd without problem, but that dose not allow me to load windows XP. If this is not the drive or the cd/dvd. So what is the problem?

  Paul

  Hello

  How did you try to boot from the CD drive?
  Have you tried to press the C key immediately after starting the laptop?

  Alternatively, you can press F12. The start menu should appear and you should be able to choose the drive as a boot device.

• Lenovo Z585 does not start on a DVD - jump directly to Windows

  Hello, I just got a new IdeaPad Z585 from newegg, and I can't figure out how to boot from a disk in the drawer of the DVD.

  I tried to open the BIOS and change the boot order, as well as simply go directly to the start menu. I tried with UEFI both active and disabled, as well as Secure Boot both enabled and disabled. No matter what I try, it does not start in any DVD.

  I try to install Linux and tried different discs and distributions of this. When no even reached GRUB, I tried a Windows 7 installation disc, and even that is ignored.

  What should I do?

  Hello
  The secureboot and uefi must be handicapped simaltaneously. You can try if you haven't.
  Also, could you try pressing the novo button to power your laptop. The novo button is the button of reocovery key a small next to the power button. Has then access Startup menu see if it helps.
  Concerning

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My windows 8 not start and there is no administrator account

  My windows will not start and I can't fix with restore point or safe mode because there is no found administrator account

  Hello

  Thanks for posting your query to the Microsoft forum.

  I understand the inconvenience caused to you. I will certainly help you in this matter.

  1. You have the administrator password?
  2. Have you ever had the administrator account on this computer?

  In order to fix your computer, we should have an administrator account through which we can perform the appropriate troubleshooting.

  If you have the administrator password, boot the computer through DVD and enter safe mode with command prompt, this will require the administrator password, enter it.

  Mode safe mode with command prompt

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-safe-mode

  If you are able to access the prompt try to activate the hidden administrator account and create a new administrator account.

  1. At the command prompt, type net user administrator / Active: Yes , then press on ENTER.
  2. Type net user administrator , then press on ENTER. Note: Please replace the tag with your passwords you want to set for the administrator account.
  3. Type exitand press enter.
  4. Restart the computer.

  Now, try to create a new Local Administrator account

  Once done, you can now disable the build-in the administrator account.

  Follow these steps:

  1. click the button Start , and then type cmd in the search box.

  2. in the list of research results, right click on cmd and then click on Run as Administrator.

  3. at the command prompt, type net user administrator / active: no and then press ENTER.

  4. type net user administrator , then press on ENTER.

  Note: restart the computer to make the changes.

  If you do not have the DVD of Windows 8.1, I suggest to download and create a bootable media and perform operations.

  Refer to this link: create installation media for Windows 8.1

  Please post back with the results and the information requested, we will be happy to help you further.

  _____________________

  Thank you best regards &,.

  Isha Soni

• Mac does not start and the fans going crazy

  Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?

  OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.

  SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Virus on Windows, does not start and he said: no operating system or it is corrupt

  Original title: help please

  I have a laptop with windows vista. Apparently, someone in the House caught a virus.  now windows will not start and he said: I have no operating system or it is corrupted. can not even boot in safe mode or anything.  says windows error recovery screen when turned on.  any help is appreciated.

  Hi Lawry206,

  You can try the following steps and check if it helps.

  Method 1: Disconnect external devices attached to the computer and restart to check the issue.

  Method 2:

  Since you are unable to start the computer in safe mode, you try to perform a repair to start the Windows recovery environment (WINRE Mode) and check if it helps to solve the problem.

  You need start from your Installion of Windows Vista disc.

  If startup repair does not help, then try a restore of the system of the WINRE Mode and check.

  You can see the following link for more information.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• I get windows did not start and each time that I reboot I get the same thing.

  * Original title: Windows7

  O my pc displays a boot device error so I put in a disk hard new1tb and reinstalled Windows 7 and install goes ok just a little slow, but after the installation is completed after the first reboot I get windows did not start and evry time I reboot I get the same thing tried several hard drives and get the same error not sure of the material cause I can load in the bios very well any help would be great

  In addition:

  Clear CMOS - 3 ways to clear the CMOS - reset the BIOS

  The setup of the BIOS or UEFI firmware, search for UEFI settings so that you can follow special steps to install UEFI below.  Also set SATA controller on AHCI, hard drive, all on first start (or if UEFI Boot Manager WIndows).

  Then just follow these steps for a clean reinstall Windows 7 making sure to remove all partitions up to unallocated space to make it cleaner.   Follow special steps if you have a UEFI BIOS, which will have a system partition EFI in Managment of disk instead of reserved system (MBR) and make sure that the SATA controller is set to AHCI.

  Other important to overcome optmizations install them hedges here to resolve the failures of Windows Installation 7

• Application does not start and does not respond. Closed that it self.

  Hi guys

  I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.

  To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.

  Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."

  I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...

  Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)

  Thank you very much!

  OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.