Very new to Flash - Add a frame to an imported movie

Similar Questions

• Hi im very new to Flash, and mostly just an artist off line trying to get into flash. Can I draw in professional flash and export it as an image?

  Can we just gimme a little how description or me a link to a YouTube video that explain maybe?

  Yes, there are tools for drawing and you can publish your creations in various formats of images (GIF, JPEG, PNG) - check the publication settings under the top menu files option.  I've often used Flash to create graphics on the other drawing tools, but it's probably because I was more familiar with it compared to other products.  At one point, I created an assembly line of sorts where each image on the timeline was a different arrangement of a design, and I took the controls for the final design as a Flash file where you could strengthen through the images to a slide show.

• Very new and stuck with animation Movie Clip layer

  I'm very new to Flash (CS4) and after searching a solution to a loop layer, I understand better that by creating a new Clip and animation to be done here.

  I did this and then put the Clip in a layer on the stage... but it won't play at all. It is as I put just the symbol that presents in frame 1 of the Clip and it remains static.

  What Miss me?

  First of all, when you run the movie in Flash (the Publisher) itself, then the animations will not work. 'Enter' will be displayed without animation. You must export the movie (CTRL + enter) or menu: control > test movie. If this is not the cause of the problem, how many images does your film? How many pictures does the layer where you put the animation on? Try to add enough frames. Use a new layer without keyframes and use it for all the animations that should loop. If these animations should run asynchronous, then add a layer for each animation and let them from a keyframe.

• I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges to add this item.

  How do we change privalages

  I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges for add this... even though I am the administrator on the computer?

  Hello Victor,.

  Try to run the Setup file of Adobe Flash Player as an administrator by following the instructions in this article:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• New to Flash Pro: images and scenes to help!

  Hello! I'm new to Flash Pro and I am currently doing a platform game simple game for a school project.

  I have already created the game, but at this stage just want to add a title menu or a preloader. The problem is, I don't know where to start. I know how to make the menu real and preloader, but just different States in the game seems a bit difficult (one for the preloader, which launches the start menu, which then runs the script of a game), and I have not found online tutorials about it (maybe because it's simple..?). Anyway, how can I create these 'States' for the menu / game / preloader? As I said, I'm new to Flash Pro, I use images, scenes or just a code? Im sorry if this is confusing, I'm still learning the jargon flash

  -Thanks for your time!

  You can insert a new empty keyframes (right click on frame 1 of your main timeline).  Add a stop() in Control Panel actions of your Framework 1 and add your title menu on the stage.  Add a button that will execute nextFrame() to move towards your previous image of the first (and now 2nd).

• Flash navigation and frames / iframes page

  For a few months, I tried to have a flash file open a certain page html or php page in a framepage or an iframe. In the past, I got no problem with that. I've done several times before without any error. But somwhere along the launch of internet explorer 7 and or Flash Pro 8. I had no luck.
  
  If you look at the following site: http://www.teamafp.com
  you will notice that the flash menus system works very well. Flash keys opens the correct pages in the correct windows. This site has been made a few years previously and even with the development of IE7 and FireFox, it always works as it should.
  
  Now at a new site using the SAME CODE and EXACT SAME HTML / PHP CODE (for frames / iframes) it does not work
  
  I have mad a quick example located at this address: http://67.59.38.170/FlashIframe/window.html
  
  Anyone who can understand why is it would be greatly appreciated!

  Try the "bottom".

• I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it says the Palestinian Authori

  I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it tells me that the page cannot be opened because it was redirected too many times...? Help, please!

  Let me add some details to the choice in the scenarios you have for the use of domains.

  The areas are to simplify all kinds of activities on the Internet for users. Instead of addressing your email to go to the software from e-mail server to a computer with the IP 113.78.59.238 number, users can simply run their mail to "hannah" @ "gmail.com" or go to the website to "gildedgraces.com". This makes things a lot easier for users, but requires a little more difficult techniques backstage, because Internet computers connected and hardware (servers, tablets, phones, refrigerators) have only single numbers, not names. So, how internet needs to know which computer manages all emails for "@gildedgraces.com", and where physically this site 'www.gildedgraces.com '? This is where the "Domain Name Servers" kick in. They maintain long lists of these domain names, with references to the IP numbers correct and up-to-date. In this way, technicians can also easily Exchange computers, servers, connections, where a site is moved to another host, or when a server suddenly collapses. These things will happen, things have to change. They want to update certain IP numbers in the list on the DNS servers. I have it?

  So in order to get a Web site running, you know where your domain registry database is guarded and kept safe, and where your Web site is physically located.

  Note the difference between DNS (or servers) and the service (or Web servers) throughout all the instructions and documentation.

  Now, have a look at this PDF that was returned by Brad, in his response above.

  The domain name can be registered at any domain provider and the registry itself is not always need to reside there. You could relegate (you might say "move" or move) the registry for the DNS to another provider (like BC) service. In such a scenario, he must tell the provider holding the credentials of your registry, to redelegate it in British Colombia. That's what the article 4 in the PDF file. And of course, BC DNS service can internally so all applications for this field to their own web server.

  You can also choose to keep your current domain provider maintains the registry, but that their DNS servers before any request of this area on the web servers of British Colombia, where your site is published. This is typically a necessity for registrations from non-American, since many extensions of national domains (such as .nl and .de) can be recorded by suppliers outside of this nation. So the registry simply cannot be moved to an American company (it's a legal thing). In such a situation, article 6 of the PDF comes into play, describing what BC would normally internally: to the domains of the physical location of the Web site.

• Brand new to Flash and get into trouble

  I work through a tutorial that I found to do a flash MP3 player.  I have problems with the volume controls.

  Line 20 is the problem, and the compiler gives undefined ownership 1120 error for s_Transform.  I'm pretty sure it's a very simple question, but I'm new to Flash in general.  I'd appreciate any help!  Thank you!

  Here is the code:

  import flash.events.MouseEvent;
  import flash.media.Sound;
  import flash.net.URLRequest;
  import flash.media.SoundChannel;
  import flash.media.SoundTransform;
  import fl.events.SliderEvent;
  
       var myMusic: Sound = new Sound();
       var soundFile: URLRequest = new URLRequest("1.mp3");
       var channel: SoundChannel = new SoundChannel();
       var s_Transform: SoundTransform = new SoundTransform();
  
  btn_play.addEventListener(MouseEvent.CLICK, playMusic);
  btn_stop.addEventListener(MouseEvent.CLICK, stopMusic);
  sld_volume.addEventListener(SliderEvent.CHANGE, changeVolume);
  
  
  function changeVolume(evt:SliderEvent):void
  {
       s_Tranform.volume = sld_volume.value;
  **this is line #20, the problem line**     channel.soundTransform = s_Transform;
  }
  
  function stopMusic(evt:MouseEvent):void
  {
       channel.stop();
  }
  
  function playMusic(evt:MouseEvent):void
  {
       myMusic.load(soundFile);
       channel = myMusic.play();
  }

  Problem, it is a typo.  Check your spelling on this line and the line of input.

• I'm new to flash

  I'm new to flash and I need some help if you answer this can you write the details in the plain talk thanks (very senior)

  I have my ready photos from photoshop my screen flash photo has brought it up in the library, and then try to drag to the stage

  just as I get is a square not picture what the problem

  Help, please

  M0

  It is possible that you have the preview mode checked for the layer where you want to place the image.  In the image below, I circled the calendar control to toggle modes of all the layers big lines at a time.  You can also change layers by clicking this symbol in the desired layer.  In the image below 1 layer has its on outline mode, which is indicated by the green square.  Layer 2 is not on contour which is indicated by the solid purple square function.  The square shown on the stage is an image on the layer 1, as it appears with the mode on.

  

• New to Flash CS4... How to remove a keyframe?

  I'm new to Flash and have two questions that I can't find an answer to in one of my books or online tuts.

  #1 I created a motion tween for my chart.  I have 10 keyframes in total, but went in I had 1 too.  I would delete it but when I go to the drop down menu to delete... I can only delete all the.  Or... what happens if I want to delete a keyframe in the middle of my trajectory?

  #2.  I have a keyframe in the same path and I would like to move elsewhere as scheduled.  When try Alt + click and drag... it moves the entire timeline.  I wonder if there is a way to do it.  I might miss, not here, what could be more advanced?

  Your help is appreciated.

  Hi Kate,.

  To move an image, Ctrl/Cmd - click and drag to a new location one. It won't drag the entire range.

  To delete all keyframes of property on a single image, select it (Ctrl/Cmd-click), right-click and choose Remove image > all (or one of the other options if you just want to delete an image key type. Remove executives also works for an individual frame like this also, but it removes the frame, not only delete the keyframe.

  New movement spans allow you flexibility animate independent properties, which explains why there is more to just delete the image of the additional options.

  You can also remove individual keyframes of properties in the query editor.

  Hope that helps.

• Very new to Apple products. Updated to El Captain & now I can't upload photos anywhere. Please kindly help me.

  Hello Apple & Apple community. (Re posted again for better explanation and organization)

  My name is Lisa Marie and I am very new to Apple computers. I'm more familiar with my iPad and iPhone. I recently got a week my first MacBook Pro. I had the version of highest level 13-inch MacBook Pro with Retna display. That being said that I am assuming that I have all the latest versions of the software. As I said I am very new to computers Apple MacBook and I know not at all what so ever. I know even where to start looking for information on my MacBook Pro. I really hope some of you can help me given the lack of information I had again to all this. Please please bare with me and be patient with me.

  With the above being said, I am much need help. When I got my computer about a week ago I was able to upload photos with a problem at all. Then, I got a notification of updated OX El Captain so I did it because the person who helped me at the Apple Store when I got my MacBook Pro says it is very important to update every time Apple launches an update to keep my MacBook Pro to the level of performance higher. When I upgraded to the captain El OX and connected to my social media accounts I tried to download my photos that are stored in my MacBook Pro Photo Album by clicking the button Upload Photos/Media provided on my social media accounts. When I did the box popped up which is usually done in order to select your media you upload. Usually when the box pops up you can see the Photo Album in the main column to the left. But this time after that the upgrade of BŒUF El Captain when the box to jump to the top of the Photo Album wasn't even show or left in the main column. Here are some screenshots of my problem. I thought I would include screenshots to better explain my problem to the community. I hope this helps.

  These are all methods I tried to upload my pictures on my social media accounts of my Photo Album here on my MacBook Pro...

  These screenshots are all my downloads on my MacBook Pro folder, because the Photo Albums have been taken and removed from the left column by the upgrade of BŒUF El captain to ever so: no access to upload photos to all that.

  Try one... As you can see in the screenshot below the library is completely eliminated, in the left sidebar in the main column. In the old version before the upgrade of the captain El OX he had three options between devices and the section of Tags in the sidebar on the left. One of these options has been Photo Albums and you can easily access your photos from there. In addition I tried to click on Photo Album library icon in the main screen and it still would not bring my photos at all what so ever. Tried a million times.

  

  Try two... Then, I tried this method. As you still see nothing and I even clicked on the folder images as shown below and it still wouldn't let me transfer my photos at all.
  

  I really hope that these catches have helped explain what my problem is with uploading my photos on screen social media accounts. I hope some of you can help me. I really need to be able to download the photos I am a photographer and its my business and the only source of income. I need to show my work to my customers and if I can't show my work to my clients on my Facebook page so I can't get to work and my business will suffer. If anyone can help me I would be extremely grateful and thankful.

  Thank you so much... Lisa MP

  Scroll down below the tags box in the source on the media on the left pane and select ==> photos ==> Photos and choose your images and click Download

  LN

• There is a popup "jenkat new game alert" that's no way to anywhere! very annoying. I am very new to the computer and I obviously did something wrong

  I am very very new to a computer and I have no other form of assistance. I'm on the internet and saw a free game, I wanted to download/play. now I'm stuck with this pop up thing that indicates "JENKAT new game Alert." It does allow me to close. It appears in whatever it is I'm trying to do. can someboy there please help me solve this problem and I'm not going to the sites until I thoroughly learn how to use a computer :)

  thanking you in advance, libby

  Hi there, found this:

  http://answers.Yahoo.com/question/index?QID=20090823055839AAqZUAs

  Jenkat games room can be customized to disable the pop-up window of new games. Simply open the Arcade and click on the 'Settings' tab at the top. Then click on the 'Préférences' tab, and then click to remove control of the 'daily game alerts' box.

  If you need to close the Arcade, all you have to do is to find the Jenkat Games Arcade icon in your system tray (the purple cat in the lower right corner of your screen). Right-click on the icon, and then click "Exit". That would end the arcade for you, and you can restart at any time.

  TaurArian [MVP] 2005-2010 - Update Services

• Questions of OS/C drive (I'm very new to windows 8)

  I just took my new Dell Inspiron computer yesterday.  It has a 1 TB hard drive and Windows 8.  Forgive my simple question, but Windows 8 is very new to me.  I want to create folders on my drive hard that I have on the latest computers, but this new "OS (C)" the name of the hard drive with apparently the operating system files and the records very accessible to me.  First of all, it scares me a little that I could accidentally make a change which could affect my OS... shouldn't these files and folders may not be available for me, hidden, or something?  Second and my main question, I want to create folders of data on my hard drive.  Is it OK to create the disk "OS (C)?   It worries me that I created folders of data on a disk, called "OS" drive.   Is there something in the place where to put my data folders that also avoids any chance to affect the OS files?  Thank you!

  Hi Kim27,

  It's OK save files and create new folders on drive C that should not cause problems as long as you don't delete all the files in the C drive.

  Operating system files may or may not be visible by the user according to the file type, however, to ensure the stability of the system, it is recommended to save the data in the 'Documents' folder on your machine because it makes the access easy data and separate.

  Just reply to other questions.

• Support for new NAND flash

  Hi all

  As you know, according to the version of the TC TC5.1.4 software, all the codecs of series C/MX/SX/EX newly built have new NAND Flash.

  If some specified software must be applied to them.

  'Series C' means "C20, C40, C60, C90", is this correct?

  It feels strange to me that Quickset has same flash memory with codecs for Integrator as C90.

  Best regards

  Kotaro Hashimoto

  This applies to the C20, C40, C60, C90, EX60, EX90, MX200, MX300 and SX20.

  So yes, you are correct that C-series Endpoint is C20, C40 and C60 C90, but please note this profile include with these endpoint of series C and system.

• How can I create a new folder and add some choose another folder

  How can I create a new folder and add some pictures a different folder?

  Click Start-> computer.  Navigate to where you want to create the new folder.  Then, hold down the ALT key and press F.  Point again-> file and click folder.  Now, you have created the folder if you need to name it.  Type the name you want to give the file and press ENTER.  Now you have the new folder with the name you gave it.  Use him copy / paste to copy the images to the new folder.

  Good luck.