Very poor wireless signal on the new laptop to C55. By getting only 2 MB to download

Similar Questions

• Installed CC on the new laptop, why am I allowed only trial version?

  Initially, I bought the CC and installed on a Macbook pro. Now, I bought a new Macbook pro 2014 and installed CC, but it only allows me to run the trial version. As far as I know, CC allows the software to be installed on both machines at the same time and since I'm logged in with my Adobe ID on the new laptop, it should recognize that I have a license, or not?

  What can I do to change trial version of standard license?

  Thanks for the confirmation of Martin. I see that you have two different accounts with Adobe. This account for Kingdom studio has your subscription. I would ask you please use this e-mail address to activate the product on the target computer.

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• Everybody knows very poor sound qualtiy on the new iphone is?

  I traded in my Blackberry "BOLD" to get my first IPhone and the sound quality is absolutely horrible!   Let me know if there is a way to fix it.  Maybe it's my first and last experience with an Apple product!  Verizon is my ISP.  I didn't support let me know if you have any suggestions.

  Sound quality on what? Bluetooth? Play music? Make calls? With the speaker or the speaker in the ear?

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• How to download purchased new music on the new laptop when first download unsuccessful on the old machine?

  I downloaded a few songs on my very old laptop that doesn't work: using the new laptop, iTunes tells me that I already bought the but I don't see any way of the re - download: maybe because I'm in France? What can I do to get the music I paid? Thanks in advance!

  Are purchases on the iTunes store in France? You must be in a country to use his shop (including redownloading), which is part of the plan of the store, so while you are in France, you can only use the Bank of France (and potentially to re-download your purchases Bank of France). You can redownload will show in the purchase link under quick links on the right side of the home page of the iTunes music store (assuming you have not hidden their cloud, and if they are still in the store).

• connection printer to the new laptop

  My printer is connected to the wireless network, but I try and put it on my new laptop (windows 7), that it says cannot find every time. I checked that all on the same network and they is, firewall off as well - so frustrating

  How to connect existing printer for the new laptop?

  I'm sorry you have a problem with the communication of the printer and the computer.

  Try disabling your anti-virus.

  In addition, run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know what happens.

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Re-installing Lightroom on the new laptop, keywords from images! (I think!)

  Hello

  I use Lightroom 5.2

  I spent several days it is has updated all of my keywords in LR using my old laptop. I have about 8 000 image files, mainly RAW CR2 files, all recorded on a disc toshiba external hard.

  Now I have a new laptop and reinstalled LR on this new laptop computer. I'm starting to import all image files in LR since the external hard drive, but I noticed that there are no keywords in the version of LR installed on the new laptop.

  I perhaps foolishly assumed that when I keyworded all files first time round the metadata would be saved in the CR2 file itself, such that it would be accessible by other applications, or, in this case, by a version of LR installed on a different laptop. This doesn't seem to be the case.

  I'm doing something wrong? Are there key words, but I can't see them somehow?

  I really don't go back through 8000 files and re - keyword all, it took me days!

  If all this fails, can I go back to the version of LR on my old laptop (which I still have) and somehow join keywords in files on a more permanent basis so that they are recognized by my new laptop, or are what I'd need to set it as default when first, I realized the keywording exercise?

  Thank you very much
  Tom

  But it's a brand new version/installation of LR. Then it will be a brand-new photo as much as the new version of LR is concerned, used? How they see the before image file?

  Your keywords are in Lightroom, more precisely, they are in the catalog file. You must transfer the catalog file, as described in the link I provided. Import photos is not the way to do it.

  I tried to work through the tutorial you linked to, but I'm stuck at step 4: transfer. For example, he says to transfer the catalog, etc.. But I'm not transfer anything I am? I just have to say the new version of LR where to look to find image files...

  You MUST copy the file from the catalog to the new computer. Then, although it is a new installation of Lightroom, you MUST use your existing keywords with catalog. That's the key, you MUST use the existing catalog file.

• CS4 programs transferred to the new laptop

  The laptop on that initially charged Suite CS4 dead. Bought a new laptop at Micro Center. They transferred programs and data in the new laptop. I tried to use Photoshop and DreamWeaver, but get the error code 147,20.

  Micro Center told to contact Adobe.

  I bought CS4 Suite while studying at JCCC 5 years. What do need me to get the program to work on my laptop replacement?

  You must install the software, transfer does not work well.  You will need the serial number of your purchase to activate the software after installation.  You need floppies installation of your purchase, in order to install, and if you don't have the disks, then you can download the trial through the page linked below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  You may have disabled original activation, especially the case if you had it installed on more than one machine.  To do that you must contact Adobe technical support directly through chat or by phone.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• I have sync firefox on old laptop checked how do to the new laptop

  I followed the instructions and sync old laptop and it is checked... now, I opened the new laptop, Open firefox and where do I go from here... Thank you

  Enter ' subject: accounts? action signin ="in the URL bar, fill in the fields and click"Sign in. "

• I used windows easy Transfer to transfer data to the new laptop, but the Favorites do not show up. How do I get my old favorites?

  I used Windows easy transfer to move the data from the old to the new laptop. Bookmarks of Firefox has not been transferred. How can I get my old favorites for the new machine? Thank you

  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Windows Vista and Win7:
  
  drive: \Users\Windows login user name\AppData\Roaming\Mozilla\Firefox\Profiles\profile_name

• What version of Firefox options do I have to use Firefox on the new laptop running Win 7 64 bit, and how do I move bookmarks current laptop running Firefox 3.5.13 again laptop?

  Currently running on the laptop using Windows XP pro sp3 Firefox 3.5.13 and want to move my favorites to a new laptop. New laptop using Win 7 pro 64 - bit OS. I've read too many conflicting reports on Firefox and Win 7 and Firefox works on a real 64 - bit version. What are my choices for a stable browser for the new laptop and what specific version of Firefox is recommended, and the advantages and disadvantages of this suggestion? (I think we can run Firefox 32-bit version in the 64-bit environment, but which is the best choice?) I have not installed Firefox on the new laptop yet and am eager to dump IE. It is displayed for my old laptop. Thank you...

  Mozilla working on a 64-bit version of Firefox, but it's a way off. Currently, the only release versions are 32-bit, and the next major version will be also only 32 bits.

  I recommend that you install the latest version of publication (3.6.10) available since http://www.mozilla.com/

  To copy bookmarks, follow the procedure described in the article restore bookmarks from a backup or move them to another computer to save a json file, you can import (restore) on the new laptop. You can copy more bookmarks, for details, see back up and restore the information contained in the Firefox profiles and backup - MozillaZine Knowledge Base Profile. The last link includes a third-party utility that can make the process easier.