Very slow execution of packages

Similar Questions

• Since the upgrade to El Capitan, my Mac is VERY slow.

  I just have to upgrade Yosemite El Capitan.  Since the upgrade, my Mac is VERY slow.  Spend a lot of time with the spinning beach ball, and slow to change application.

  Why?  What should do?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• After the malware problem, firefox is very slow, even though I uninstalled it twice.

  I have a malware problem. I have restored the windows and installed the Malwarebytes program. Also, I deleted the registry. After that, I send using firefox. However the mozila was very slow but not internet explore.
  Then, I uninstalled and installed mozila twice but the problem remains.

  Please try to run AdwCleaner and see if Firefox accelerates. If this does not help, try the following steps.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

• IMac running very slow

  Hello ~

  We had had this IMac for more than 7 years and recently started running very slowly.  I do not understand, by EtreCheck the RAM we are weak, but someone else can guide me on what else can do, by this report, to fix the slowness?

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-03-25 10:23:15

  Download EtreCheck from https://etrecheck.com

  Time 04:22

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Problem: Computer is too slow

  Description:

  My computer is very slow

  Hardware Information: ⓘ

  iMac (24 inch, early 2008)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac8, 1

  1 2.8 GHz Intel Core 2 Duo CPU: 2 strands

  2 GB RAM - Insufficient RAM! Extensible - [Instructions]

  BANK 0/DIMM0

  1 GB DDR2 SDRAM 800 MHz ok

  BANK 1/DIMM1

  1 GB DDR2 SDRAM 800 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  ATI Radeon HD 2600 Pro - VRAM: 256 MB

  iMac 1920 x 1200

  Software: ⓘ

  OS X Yosemite 10.10.5 (14F1605) - time since started: about one day

  Disc information: ⓘ

  Hitachi HDP725032GLA380 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 (Go 40,79 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Fitbit Fitbit Inc. Base Station.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  M400 Polar Polar Electro Oy

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  ~/Library/LaunchAgents/com.onlineapplicationnotice.AppNotice.plist

  An adware file found. [Remove]

  Kernel extensions: ⓘ

  / Library/Extensions

  com.joshuawise.kexts.HoRNDIS [no charge] (6 - 10.6 SDK - 2016-03-22) [Support]

  / System/Library/Extensions

  com.Aliph.driver.jstub [no charge] (1.1.2 - SDK 10.7 - 2016-03-22) [Support]

  com.olympus.CamBlockCommandsDevice [no charge] (2.0.0 - 2016-03-22) [Support]

  com.olympus.CamBlockCommandsDeviceUP [no charge] (2.0.0 - 2016-03-22) [Support]

  /System/Library/Extensions/OlympusDSCDriver.kext/contents/plugins

  com.olympus.CamFWSerialBusProtocolTransport [no charge] (2.0.0 - 2006-11-30) [Support]

  com.olympus.CamUSBMassStorageClass [no charge] (2.0.0 - 2006-11-30) [Support]

  Startup items: ⓘ

  ParallelsDesktopTransporter: Path: / Library/StartupItems/ParallelsDesktopTransporter

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 6 tasks Apple

  [loading] 144 tasks Apple

  [operation] 42 tasks Apple

  [killed] 20 tasks Apple

  20 killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 44 tasks Apple

  [loading] 136 tasks Apple

  [operation] 67 tasks Apple

  [killed] 15 tasks Apple

  15 killed process lack of RAM

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-02-21) [Support]

  [no charge] com.oracle.java.Java - Updater.plist [Support]

  [failure] com.sophos.uiserver.plist (2012-12-26) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-02-21) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-02-21) [Support]

  [failure] com.adobe.fpsaud.plist (2016-03-07) [Support]

  com.Apple.aelwriter.plist [loading]

  [operation] com.fitbit.galileod.plist (2015-10-30) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist [Support]

  [loading] com.skype.skypeinstaller.plist (2014-03-07) [Support]

  [failure] com.sophos.autoupdate.plist (2012-11-07) [Support]

  [failure] com.sophos.intercheck.plist (2012-11-07) [Support]

  [failure] com.sophos.notification.plist (2012-11-07) [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2011-10-07) [Support]

  com.apple.SafariBookmarksSyncer.plist [failure]

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [operation] com.onlineapplicationnotice.AppNotice.plist (2016-02-22) Adware! [Remove] 

  ~/Library/application support/tap/AppNotice

  Items in user login: ⓘ

  iTunesHelper UNKNOWN (missing value)

  Jose UNKNOWN (missing value)

  Safari application (/ Applications/Safari.app)

  AdobeResourceSynchronizer UNKNOWN (missing value)

  Maxillary Updater application (jaw Updater.app/Applications /)

  FlowSync application (/ Applications/FlowSync.app)

  Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

  Other applications: ⓘ

  [ongoing] com.aliph.Jawbone_Updater.61660

  [ongoing] com.fitbit.GalileoMenubar.88924

  [ongoing] fi.polar.FlowSync.94036

  [loading] 360 tasks Apple

  [operation] 126 tasks Apple

  [killed] 40 tasks Apple

  Plug-ins Internet: ⓘ

  Web of Google Earth plugin: 6.0 (2010-11-23) [Support]

  Default browser: 600 - SDK 10.10 (2015-07-16)

  Flip4Mac WMV Plugin: 2.4.0.11 (2011-10-16) [Support]

  CouponPrinter-FireFox: Version 1.1.5 (2010-02-01)

  OfficeLiveBrowserPlugin: 12.3.6 (2013-04-28) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-14) [Support]

  FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-12) [Support]

  Silverlight: 4.0.60531.0 (2011-10-16) [Support]

  QuickTime Plugin: 7.7.3 (2015-10-26)

  Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-12) obsolete! Update

  CitrixICAClientPlugIn: 11.2.0 (2011-10-26) [Support]

  iPhotoPhotocast: 7.0 (2010-04-03)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-14) [Support]

  CANONiMAGEGATEWAYDL: 3.0.0.2 (2009-03-06) [Support]

  CouponPrinter-FireFox_v2: Version 1.1.6 (2011-09-20) [Support]

  MeetingJoinPlugin: Unknown - SDK 10.2 (2015-08-13) [Support]

  User Plug-ins internet: ⓘ

  BrowserPlus_2.9.8: 2.9.8 (2010-09-09) [Support]

  fbplugin_1_0_3: unknown (2010-02-26) [Support]

  Safari extensions: ⓘ

  CustomerAid (2016-03-07)

  SlickSavings (2015-12-06)

  3rd party preference panes: ⓘ

  BrowserPlus (2010-09-09) [Support]

  Citrix Online plugin (2011-10-26) [Support]

  Flash Player (2016-03-07) [Support]

  MacFUSE (2009-06-03) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 319,21 GB disc used: 278,43 GB

  Destinations:

  My book [Local]

  Total size: 999,37 GB

  Total number of backups: 8

  An older backup: 21/03/10, 19:02

  Last backup: 12/04/10, 23:00

  Size of backup drive: Excellent

  Backup size GB 999,37 > (disk size 319,21 GB X 3)

  Top of page process CPU: ⓘ

  24% mdworker (6)

  3% WindowServer

  1% fontd

  1% kernel_task

  0% com.apple.WebKit.Plugin.64

  Top of page process of memory: ⓘ

  Kernel_task 332 MB

  Com.apple.WebKit.WebContent 199 MB

  Safari 59 MB

  Mdworker (6) 51 MB

  Com.apple.WebKit.Plugin.64 35 MB

  Virtual memory information: ⓘ

  44 MB of free RAM

  1.96 GB used RAM (377 MB cache)

  45 MB used Swap

  Diagnostic information: ⓘ

  24 March 2016, 15:21:01 test - passed

  Thank you

  Silvia

  1. Uninstall sophos av-ware in accordance with the instructions of developers.

  It robs your system of valuable resources and not necessary with OS X

  2 remove any UN-nessessary launch, the user login items and Internet Plugins user.

  line flow and execution less stuff at the same time
  

  3. upgrade your RAM.

  a. for the Apple Installation Instructions

  See > install memory in an iMac - Apple Support

  b. 2 x 2 = 4 GB kit from OWC macsales.com is only $32

  See > http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400

• Satellite L70-A-14Z is very slow

  Hello world

  Just bought this Toshiba Satellite A-L70-14Z computer with Core i5 4200 (2, 5 GHz), 4 GB Ram running Win8.1.

  All I can say, is that this computer runs very slow!

  Everything I do takes forever!

  Even my old laptop running Centrino with XP or seven run faster!

  Any idea? It's a new computer!

  Thank you

  What do you mean exactly, but running slow?
  Can you give us more details?
  Sorry mate but this decryption general isn't very useful in determining the cause of the problem.

  The laptop can be slow for different reasons.
  The system would be overloaded and several background process might slow down the system.
  However, a HARD disk failure could affect the execution of processes and data read/write system.
  Last but not least virus and malware infections are common cause of problems in the system.

  As you can see, there are many reasons why a system is slow.

• Satellite A660 - Internet connection is very slow

  Hello

  I have a Toshiba Satellite A660-guest 1GT, bought the Poland and I have a problem with the internet. Where I live there is a wireless router and my laptop connects to the wireless but the internet works very slowly. I have a older laptop which I use in parallel on which the internet is much faster. When I clicked on the network and diagnose the problem, there was a message that the connection seems to be broken. In addition, the number of packages I'm sending is twice or three times less than the package I receive.

  I took out the battery, reconfigure power settings, reinstalled both drivers for the LAN and wireless, all uninstalled programs of eternal but the internet is still very slow. I have to wait more than 10 minutes to load a video on youtube. Which, on my old computer, it must be about 1 min. can you please advise me what to do?

  P.S. I donno if that counts. I got Windows 7 in Polish and I installed an English pack with vistalizator,

  Thank you!

  Hey,.

  Is Internet connection too slow when you connect the Ethernet cable? So, you can determine whether the problem is related to the Internet itself router or WLAN connectivity.

  Generally speaking, it is difficult to say something about the WIFI configuration and router. In your case I also get in touch with your internet service provider and ask for the correct router configuration. They can also tell you how to set up the laptop to go online. :)

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• TCP between PC and very slow LM3S8962

  Hello

  IM using a TCP connection between my PC and the LM3S8962. Ive been doing some tests and the connection is VERY slow - only transmitting every 200ms or so--even with the simplest examples two examples TCP incorporated and not incorporated. This could be due to the algorithm of Nagel? Ive tried using the TCP-NODELAY package while getting connection errors every time I try to put in place.

  Any help would be appreciated,

  Brad

  I discovered that including a 'warning error' vi and ignorant error 56 solved the problems of speed using normal TCP. STM this inherently includes in their functions and so is the reason why the STM was so much faster.

• PMC-GPIB with NOR-488 DDK very slow when sending the commands-GPIB

  Hello

  I use a PMC-GPIB Board and the NOR-488DDK allows to develop a GPIB Interface with VxWorks. Already, it works correctly, but sending a GPIB command takes about 100 ms, which is very slow.

  Are there opportunities to speed up data transfer?

  Hello again,

  I found a solution to my problem! I realized that the command execution is related to the vxWorks system clock! Of course, this is done in the DDK (driver development kit).

  The system clock is easily adjustable upper and then orders are shipped quickly.

  Thanks for your time

  Good day

  Cassidian

• Noise comes from the computer and is very slow

  I just got a new power supply because there was an amber light and installed after the computer is very slow and makes a grinding noise and the fan is ruining very hard.

  My pc is a Dell XPS 410
  Windows Vista SP2
  Here's the part
  1DJ301Kit, mouse, Universal Serial Bus, 2BTN, optical, Lead Free Black1DT240Card, graphics, 7300, weak encryption, MRMGA10, 22X8388Dual In-Line Memory Module, 512667M, 64 X 64, 8, 240, 2RX81HF730Display, flat screen, 20W2007WFP, black, Dell Americas Organization1KJ293Assembly, Panel, fill, floppy, TANK, Workstation1DY654Kit Precision drive, software, works 8.5, Office TRIAL, English1JF495Modem, V.92, Data Fax, SON2 internal, without lead, Dell Americas Organization1MY531Assembly, DVD +/-RW, 16, TSST SATA , READER Black1JX718HARD..., 250G, S2, 7.2 K, 3.5, WD-HAWK0149DFINFORMATION..., PREPARATION MATERIAL..., DEVIATION..., PRECISION WORKSTATION... INCREASE..., #21TH659PLACEMAT..., GETTING STARTED..., DIMENSION..., SYSTEM PERFORMANCE EXTREMES..., 4101YH251GUIDE..., OWNER..., DIMENSION..., PERFORMANCE EXTREMES SYSTEM..., 410, ENGLAND/ENGLISH... 1HU608Kit, software, Norton Internet Security, 2007, 15MTH, English1RH659Keyboard, 104, UNIVERSAL SERIAL bus..., UNITED STATES..., Black, DARFON ELECTRONICS, Corp.... 1JW762Kit, software, packaging, digital video disc VHP32 Drive English1UH837Kit, Speaker, 12V, AS501, Nmb Black001323INFORMATION...,..., CHASSIS NO ITEM1DH108ASSEMBLY......, DIMENSION 9200/410, PWA INTEGRATED... 1JX144Processor, 6300, 1.86, 2 M, Core Duo-conroe, Burn 21NJ131INSTRUCTION... L6 CHAS DEVIATE ON L5.51XP850Assembly, radiator, protective, MATRIX TANK DESKTOP...

  You probably have a hardware problem.

  grinding noise refer to metal on metal contract-fans, hard drive, everything that revolves.
  noisy fans mean generally the CPU is running too hot (for some reason any).
  If you know enough about the material to troubleshoot/fix the problem, Best Buy/s Geek Squad of free basic diagnostics, they will check it out and let you only know what they think is the most likely cause.

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• My projects always run very slow, what would be my problem?

  Hey everybody,

  For weeks, I worked in first and everything is still working very slow: most of the time I have to restore, even when I don't have no complex sequences (and takes forever).

  I'm not well edition 4K or something special (50 fps), but even that shouldn't be a problem with my Macbook Pro.

  
  

  My computer specs:

  -2.8 GHz Intel Core i7

  -16 GB of ram

  -NVIDIA GeForce GT 750M 2 GB

  I've tried the "'Mercury Playback Engine software only", and it does not really help. "

  Settings that I use:

  -RGB curves

  -Stabilizing Warp

  -(HLS) color balance

  Can someone help me?

  Tutorial on Vimeo https://forums.adobe.com/thread/1567965 codec

  Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

  MOV is a wrapper, which is inside YOUR package - exactly what is on the INSIDE of the video you are editing?

  A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

  https://forums.adobe.com/thread/1070933 for instructions of screenshot

  Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

• Reasons of OC: very slow SweepSwitch?

  I have a configured system as shown below.  GC works well most of the time, i.e. YCs every 20-30 seconds max pause about 13-15 ms, OCs every 45-60 minutes with break about 10 to 30 ms max.  KeepArea YC is 25% and GC trigger auto set to 23.4%.

  However from time to time I get a long pause in the OC.  Diagnosis of break shows that the problem is with the OC: SweepSwitch as indicated in the log below.

  According to the docs (Introduction to managing memory - release R28), OC: SweepSwitch is "a short break from the halves.  However, I have caught breaks of 5 seconds in the newspapers and other data that suggests that I had made a break as long as 10 seconds.  In these cases, I didn't have enough diagnostics to show to some that it was OC: SweepSwitch I increased progressively diagnoses, but everything I have shows that the variation in time of break is always in OC: SweepSwitch and other aspects are still within a reasonable range.

  I suspect that there may be also a very slow model OC: SweepSwitch only occurs on the first OC after the passage of genconpar to genconcon highlighted below.

  Any thoughts on why OC: SweepSwitch sometimes slower would be highly appreciated.

  Operating system: Linux 2.6.32 - 279.14.1.el6.x86_64

  VM Version: Version of JRockit (R) Oracle R28.2.4-14-151097-1.6.0_33-20120618-1634-linux-x86_64

  GC parameters: - Xms1g-Xmx1g - Xns: 400 m - Xgc: gencon

  [Thu Nov 14 02:22:09 2013] [CO #83] Reason for the GC: GC trigger reached.

  [Thu Nov 14 02:22:09 2013] [OC #83] 282232.476: OC began.

  [Thu Nov 14 02:22:09 2013] [CO #83] Reason for compacting: Normal.

  [Thu Nov 14 02:22:09 2013] [CO #83] Compaction of 32 to 4096 parties to index 2752. Compaction type is external. Exceptional: No.

  [Thu Nov 14 02:22:09 2013] [CO #83] Compaction area start: 0xeb000000 end: 0xeb800000. Timeout: ms 333,333.

  [Thu Nov 14 02:22:09 2013] [CO #83] Compact display limit (by wire): 10200 (dynamic), using matrices.

  [Thu Nov 14 02:22:09 2013] [CO #83] Initial phase of the initial rating (OC1).

  [Thu Nov 14 02:22:09 2013] [CO #83] Phase semiRef weakjnihandles operate in single single-threaded mode.

  [Thu Nov 14 02:22:09 2013] [CO #83] Phase semiRef classconstraints operate in single single-threaded mode.

  [Thu Nov 14 02:22:09 2013] [CO #83] Original marking phase promoted 16503 objects (1088KB).

  [Thu Nov 14 02:22:09 2013] [CO #83] Initial phase of the competing brand (OC2).

  [Thu Nov 14 02:22:10 2013] [CO #83] Concurrent mark phase lasted 207,213 ms.

  [Thu Nov 14 02:22:10 2013] [CO #83] From precleaning phase (OC3).

  [Thu Nov 14 02:22:10 2013] [CO #83] Precleaning phase lasted 16,991 ms.

  [Thu Nov 14 02:22:10 2013] [CO #83] Initial phase of the final rating (OC4).

  [Thu Nov 14 02:22:10 2013] [CO #83] Phase semiRef weakjnihandles operate in single single-threaded mode.

  [Thu Nov 14 02:22:10 2013] [CO #83] Phase semiRef classconstraints operate in single single-threaded mode.

  [Thu Nov 14 02:22:10 2013] [CO #83] Phase semiRef FinalMemleak operate in single single-threaded mode.

  [Thu Nov 14 02:22:10 2013] [CO #83] Final grading phase promoted 33496 objects (1972KB).

  [Thu Nov 14 02:22:10 2013] [CO #83] Withdrawal of 15 packages of ongoing work pool, now 277 packages.

  [Thu Nov 14 02:22:10 2013] [CO #83] Brand of total time: 262,350 ms.

  [Thu Nov 14 02:22:10 2013] [CO #83] End of marking phase.

  [Thu Nov 14 02:22:10 2013] [CO #83] Change of KM strategy from: genconpar to: genconcon, right: back to the basic strategy.

  [Thu Nov 14 02:22:10 2013] [CO #83] From concurrent sweeping phase.

  [Thu Nov 14 02:22:10 2013] [CO #83] Total scan time: 547,824 ms.

  [Thu Nov 14 02:22:10 2013] [CO #83] End sweeping phase.

  [Thu Nov 14 02:22:10 2013] [CO #83] Ratio of medium-term compact (move the time of phase/total): 1.000000.

  [Thu Nov 14 02:22:10 2013] [CO #83] Compaction too short, increasing the ratio of compact.

  [Thu Nov 14 02:22:10 2013] [CO #83] Compaction, total time: 10,630 ms (ms 478,617 target).

  [Thu Nov 14 02:22:10 2013] [CO #83] Compaction moved 19375 objects and left 2 objects. Total size 994752B moved.

  [Thu Nov 14 02:22:10 2013] [CO #83] Free memory 8257504B added compaction in 3 parts.

  [Thu Nov 14 02:22:10 2013] [CO #83] Found 26089 references.

  [Thu Nov 14 02:22:10 2013] [CO #83] 22524 references updated.

  [Thu Nov 14 02:22:10 2013] [CO #83] GC trigger is now 23.4%, was 23.4%.

  [Thu Nov 14 02:22:10 2013] [CO #83] [-] 816,920 ms OC (282232.476000 - 282233.293000)

  [Thu Nov 14 02:22:10 2013] [CO #83] [con] 0.020 ms (282232.476000 - 282232.476000) CBS: PreGC

  [Thu Nov 14 02:22:10 2013] [CO #83] [pau] 17,291 ms (282232.476000 - 282232.493000) OC: Initial

  [Thu Nov 14 02:22:10 2013] [CO #83] [con] 223,511 ms (282232.494000 - 282232.717000) CBS: ConcurrentMark

  [Thu Nov 14 02:22:10 2013] [CO #83] [pau] 33,006 ms (282232.718000 - 282232.751000) OC: hand

  [Thu Nov 14 02:22:10 2013] [CO #83] [con] 4,586 ms (282232.751000 - 282232.755000) CBS: ConcurrentSweep1

  [Thu Nov 14 02:22:10 2013] [CO #83] [pau] 524,649 ms (282232.756000 - 282233.281000) CBS: SweepSwitch

  [Thu Nov 14 02:22:10 2013] [CO #83] [con] 5,071 ms (282233.281000 - 282233.286000) CBS: ConcurrentSweep2

  [Thu Nov 14 02:22:10 2013] [CO #83] [pau] 0,278 ms (282233.287000 - 282233.287000) OC: Cleanup

  [Thu Nov 14 02:22:10 2013] [CO #83] [con] 6,117 ms (282233.287000 - 282233.293000) CBS: PostGC

  [Thu Nov 14 02:22:10 2013] [CO #83] Page faults before OC: flaws page 3, after OC: 3, pages bunch: 262144.

  [Thu Nov 14 02:22:10 2013] [CO #83] Size of the nursery after OC: 409600KB. (Free: 400339 KB parties: 10999)

  [Thu Nov 14 02:22:10 2013] [OC #83] 282232.476-282233.293: OC 880239 KB-> 146686 KB (1048576 KB), 0,817 s, sum of 575,224 ms breaks, longer break ms 524,649.

  If the solutions to avoid the resumption of the genconcon after a genconpar of emergency (and therefore the OC: slow SweepSwitch in this next genconcon) are:

  1. -The value XXgcTrigger: value to a higher value to avoid ever getting genconpar.  The value of this is of course conjecture based on the behavior observed worse cases.
  2. Always use a genconpar, i.e. Xgc -: genconpar instead of-Xgc: gencon.

  But the question remains, why the OC: slow SweepSwitch?  Maybe something to do with the information we need for simultaneous scanning of reconstruction lost during the parallel scan?

• In ESXi 5 very slow network performance

  We have recently updated one of our servers to ESXi 4.1 to 5. It's a Dell PowerEdge T300 with 24 GB of RAM. It used to run very fast, but after the network upgrade is very slow. We have another server that is still running ESXi 4.1 which runs very fast.

  I noticed the slowness of the network in Windows 7 and Windows 2008 R2 systems. When I copy a file from the ESXi 5 hosted VM to a physical machine on our network, I get between 2 to 4 Mbps. When I copy the ESXi 4.1 hosted VMS on the same physical machine, I get 80Mbps.

  I tried to disable TCP unloading on the physical machine and virtual (and both) computers with no improvement.

  I also performed a capture of the WireShark packages on one of the virtual machines Win 7. I noticed one interesting thing is that there was a lot of duplicate ACK packets when you transfer a file on SMB. I didn't know where to go to from there.

  If anyone has any suggestions, I would appreciate it.

  Check the BIOS of the server ESXI 5 and see if this physical NETWORK card sharing resource IRQ with another device and change it if it is.

  -KjB

• I need to install Creative cloud on a computer with a very slow Internet connection.

  I need to install Creative cloud on a computer with a very slow Internet connection.   Is there a way to prepare a file or a DVD so that I didn't need to download the CC apps directly on the slow computer?  Perhaps using the Manager of Adobe Application Manager Enterprise Edition package or similar?

  No, once you start the installation it will ask you how you want to install it.

  • If you have a subscription
  • If you have a serial number
  • Or I f you want to install as a trial

  For all applications in the CCM CS6, you can download the Master Collection Suite CS6 leave (links below):

  Go to http://www.adobe.com/products/catalog.htmland click on 'Try' for any application and then copy and paste the link below into the address bar

  Mac:

  http://trials2.Adobe.com/AdobeProducts/Stam/CS6/OSX10/MasterCollection_CS6_LS16.dmg

  Windows

  http://trials2.adobe.com/AdobeProducts/STAM/CS6/Win32/MasterCollection_CS6_LS16.exe

  http://trials2.Adobe.com/AdobeProducts/Stam/CS6/Win32/MasterCollection_CS6_LS16.7z

  See you soon!