Very slow to load project

Similar Questions

• 12 Firefox is very slow to load pages and if two tabs are open, it lag.

  12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.

  
  

• DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

  As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

  I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

  The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

  Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

  I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

  The only problem now is that all channels are renamed with the Appendix "sample".

  I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

  Help please, before I resort to re - install 2010!

  Karoline

  Hello Albert,.

  It is a relatively easy solution:

  In the BROWSER, go to the menu "settings":

  

  In the dialog box that is displayed, change the setting of data "always load in bulk.

  

  Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

  Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

  Otmar

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• PS CC 2014 very slow to load and function after update 2014.2

  I've updated my Photoshop CC 2014 64-bit today.  It worked perfectly until the update.  Since the update, PSCC 2014 has been very, very slow to load and slow in use.  I uninstalled used PS PS cleaner and reinstalled via the CC Office.  The problem of the speed remains.  Interestingly, the 3D is the functions Menu which seems to take longer to load.  In other words, see the program load, possibly, but 3D 6 or 7 seconds later.  I don't know if it's important.  The installation worked fine the update.

  Grateful for any ideas on what could be the problem and what I can do about it.

  My system is a 3770 K, with 32 GB of ram, x 4 SSD that dedicated to the OS, programs and other data and an Asus GTX660 (2 GB) graphics card.  I use the latest version of the driver from the Nvidia website.  OS is Windows 7 64 bit.

  I get no error message - slow all just great.

  Thank you.

  Right.  I've been tracking, with the help of the Forum of Kaspersky, KIS 15.0.1.415 file.   It seems the problem of lag with CC2014.2.

  You can find it here:

  http://USA.Kaspersky.com/downloads/software-upgrades/

• my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar

  HY sorry my bad English...

  I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end

  Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode

  measures have I made:

  -change the hard drive

  -change the disk sata hard

  -battery change

  -change the trackpad and trackpad cable

  -change the OS 10.6, 10.7 10.10, 10.11

  -change model point via

  and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time

  is there a solution that is more useful? very confused i

  0o0o

  If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/

• Very slow Firefox loading pages

  So many pages are really slow loading as minute, as Courier hot.EE youtube and many more. It started to happen when I updated to 20.0. Looked up a few suggestions and found that everything: config network.http.keep - alive using fake. And so I did and it worked, but the next time I opened firefox again, that it was slow to load again, but persistent is always false, all non disabled necessary plugins and extensions and I don't seem to find a solution. Been a user of firefox for a long time and do not want to change my browser.

  The new profile seems to work very well - don't know for how long, but we'll see how that goes.

• Logic 10.2.1 very slow to load aus with yosemite

  I use OS X 10.10.5

  I upgraded to logic 10. 2.1 last night

  very slow to plugins to the boy up to a point where it is, in my view, unusable in the workplace

  to be completely sure that I loaded Logic 10.2

  loading time at the was satisfactory

  Too bad the new update is very nice

  to support the upgrade at this time

  No problems or slowdowns with loading THE slot 10.2.1 and 10.10.5 on all three of my workbed of platforms here... so I suspect that you have either a file/permissions related question or a plugin wrapper like... installed 32lives plugin that is causing the slowdown

  Check your logs (OS X Finder > Applications > utilities > Console) to help identify the cause...

• Satellite L850 1LK very slow to load images

  Ive had this machine for almost 3 years, it was fine for the first two, but now that it does become a chore.
  I only really ever use it to surf the internet and upload pictures and its main problem is the use of the internet.
  Images and web pages are extremely slow to load even on a good fast wired connection. Ive had the computer restored by a local store who claimed they reset the map graphic, but in reality they probably just restored to the factory under the toshiba bloatware.
  It worked fine for 2 days, then became slow again, im glad this is not a virus or malware related problem.
  Just wondering realistic if we can do something with it, or is it better to forget everything and move on to something new.
  Its been updated level to windows 10, but the problem existed on 8 too.
  Thanks in advance.

  Try an update of Windows to reinstall Windows.
  Pilots precedents or browser plugins can be the cause of the problem

• VERY slow to load-Forum

  Is anyone having problems with this forum being slow to load pages? Yesterday and today, it was EXTREMELY, OUTRAGEOUSLY slow. Nothing else seems to be, but I don't know if it's me or the site... I'm just the developer report working in detriment IT... you kind of network are wizards. Thanks to relieve my frustration of let me know one way or another.

  I have not noticed anything today, works perfectly.

• Pages VERY slow to load from Firefox 6.0 download. How difficult or reinstall the old version please!

  As I downloaded the latest version - Firefox 6.0, I have some serious slow loading of the page. Nothing has changed in my PC or network configuration and in the past had a very fast loading everything, even the streaming of videos, etc.. The only thing I found in your help on pages loading slowly, it was something about a proxy Add ons question - but I have just activated. It seems to be worse when I submit a form-

  Try to clear your browser's cache.

  Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• Disk defrag works not, taskmanager no opening, very slow downing load anything

  I've had problems with my computer for a while now and I don't know what else to do now, I'm trying this.  I sent this computer in Bridge 2 times now and this looks at what could be the third if I can't get all the answers.  The problems I have been having always start when I first try to defrag my computer.  It takes forever to defragment. I started it at 09:00 and it was not yet done at 20:00. I finally stopped him at 21:00 and it just sitting there like it was stuck.  now my task manager does not open and I can't get this thing to download something, including the microsoft fixit tools.  I am very frustrated.  I downloaded all execept serivce Pack 2 updates and this thing is everything to date.  any help would be great.

  Installation of the Service Pack 2 - that is where I would start. You say that you have downloaded all the updatesexcept this one, so with that one being later, it should correct a little (apart from a virus, etc.). An application that will help you realize what lack us isBelarc Advisor . I love it, because it produces a file html (on your own computer), and once it loads in your browser, you can print it out and have a list of all installed on your computer - and it includes what Microsoft Updates are installed and missing, with the version numbers for all of this. And it's free. :-)

  I'll make sure that Windows Defender runs, as a bare minimum (I thought Windows Security Essentials, being in agreement, but I uninstalled it because it made my Vista boot slowly and returned to the Defender). Vista is quite safe, however. If you buy a commercial product, I recommend Kaspersky (I don't use it myself, because I download a lot and I'm careful, but my mother has it on his computer and she's in all Big Fish Games and so on and got a nasty on her own a bit... virus) Until Kasperky was installed and took care of that - now it catches everything (so far)).

  Virus and others can make Windows run slowly. I've seen all kinds - some file after file replication, increasing the number and size of the files, the names of some really stealth and switching. But if it is not a virus that slows down your computer, it is really likely to be fragmented files. In this case, I would recommend Auslogics Disk Defrag . It's free and FAST.  You can defragment with a new and also OPTIMIZE files so that things run faster. Any defragger will take more time with the bigger hard drives. Windows Defrag takes too long. So doesn't the defragmenter in Advanced SystemCare 3(so uncheck the Defragmenter option if you run this, BUT I recommend highly this program because it will clean a lot of things for the better - remember do not check the boxes in the window popup resulting for the module of security... unless you know what you're doing , because not all these (Browser Helper Objects, etc.) are a problem. This program also includes a fixer shortcut, an application that allows you to see what programs are running at startup and much more. One of the best I've seen, and I used it for a few years now without a problem.

  These last two linked above will go a long way toward acceleration and optimization of your system. I run these two first and then restart. SystemCare has three main sections of things that can be run - she is really well organized. It "takes the trash", in other words. :-) It will get rid of unwanted files and increase the speed and solve common registry problems (something I was initially uncertain about when I got it, but after a few years, it was no concern - it cleans things upwards, and unlike other programs of registry).

  Another possibility: according to how you have set aside for virtual memory, if you get close to maxing out your hard disk space, you might find yourself in a situation where the computer is both need to write a lot on the drive and need more space, or space dedicated to virtual memory (I call it "the garbage area" where she must write and write about things older in this area) (as things are processed - this is temporary memory). Bottom line: If you are short on space and don't know what to do about virtual memory (and people use virtual memory to compensate for the fact that they do not have a lot of RAM |) Memory to play with), then let the system choose automatically the drive. To set it, you go to computer (aka My), right click and select Properties, and then when the system properties, click Advanced, then settings of Performance, then advanced once, then, virtual memory, select change. You can select automatic for ALL your drives, OR that the management system of the size for the selected drive. All readers do not have to have it, but whatever you select whether by car, it will create this sandbox of virtual memory paging on the same drive. Editing plan that will be used by the system to write things. Check the recommended size it compared to what is currently assigned. To play it safe, go with the recommended or let the system handle. Virtual memory can increase the speed and performance.

  I hope that these things help with some of your speed issues.

  (Note: the not not opening Task Manager, tells me that it might be a virus on your system, in which case you could look in these free programs:EMCO Maleware Destroyer andEmsisoft Anti-Malware (formerly A2 Squared) (full analysis is thorough and takes some time, but there is a quick analysis).) Lavasoft Adware, SpwareBlaster, Spybot Search & Destroy are also good.

• Windows 7 Media Center very slow to load the program guide

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB of Ram. I use a dual DVB - T2 tuner card black gold. The PC works as expected with all other tasks (Netflix, iPlayer, MyMovies for Media Center), but when I first load the program guide, it takes more than 30 seconds before the system displays the guide and becomes sensitive (later loading times are a little faster, unless the PC is in "standby", in which case I face the same deadline when you enter the program guide). There is no other applications running on the system (the PC directly in the MC boots). Once the guide is loaded, it works at normal speed (sometimes channel tuning may take longer than expected, but usually he settles in a few seconds).

  I'm running Windows 7 Ultimate. Recently, I reinstalled the operating system and for a few days the PC seems to be running OK, but he soon return to be incredibly slow, loading guide. (I also started to notice that it takes longer time to start playback of recorded assets).

  Any help or pointers would be appreciated.

  Thank you very much

  R

  (Moved to programs)

  Hi Richard,

  Welcome to Microsoft Community forum.  Let me help you with your concern.

  The information in the Guide is periodically downloaded from the Internet from your Guide list service provider. You are notified that "no data is available" in the Guide in the case either of the following things:

  • Windows Media Center cannot connect to the Internet and download the new Guide information for a long period of time, and the Guide information that was previously downloaded is corrupt or has expired. For more information, see solving problems with an Internet connection. (Applicable for Windows 7 alos article)
  • Guide information is not available for your location from the lists Guide service provider. For more information, see download updated Guide listings. (Applicable for Windows 7 alos article)

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/is-is/Windows/use-guide-Media-Center#1TC=Windows-7

  If the Guide appears blank and manually download the latest announcements of Guide doesn't seem to work, you may need to set up your TV signal again. To learn how, see set up a signal TV in Windows Media Center.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.