Very slow WiFi on the 3G xoom with update 3.2

Similar Questions

• After Effects very slow on El Capitan when working with network shares?

  Hi all

  After upgrading my machine to work at El Capitan, After Effects is very slow, it is barely usable more. I'm working on a particular project with a few TIFF sequences located on a file server. Of loading TIFF seems to take forever, each image hangs on 'recover the framework' for a while. Saving and loading of the project are also very slow.

  The problem is not the server or the network connection. Same project was pretty quick on 10.10. If I open the TIFF in the Finder, everything is normal. If I open the project in Windows, installed on the same machine, everything is normal.

  Anyone has the same problem, or even a solution to this?

  Thank you

  Konrad

  Hi all

  The solution for us here was to spend our smb share to afp via an OSX Server. Then using go > connect to server... (afp://yourserver.com/yourshare) to connect to the share. After that first and Effects now work as expected again. Sequences, ram, rendered image preview are all back at speed.

  If go back us to a smb share everything slows down again so that it points definitely there for us.

  We are on the last update of CC2015 (13.7.0.124)

  Such a relief to have all this working again. There seems to be a combination of SMBS and El Cap that we were on smb before the upgrade.

  See you soon,.
  Chris

• I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  you have 2 options

  (1) bring it to a Sony repair center

  http://www.sonymobile.com/global-en/support/contact-us/

  or

  (2) use flashtool for downgrade

  Don't forget to mark the correct answers & useful answers

• PMC-GPIB with NOR-488 DDK very slow when sending the commands-GPIB

  Hello

  I use a PMC-GPIB Board and the NOR-488DDK allows to develop a GPIB Interface with VxWorks. Already, it works correctly, but sending a GPIB command takes about 100 ms, which is very slow.

  Are there opportunities to speed up data transfer?

  Hello again,

  I found a solution to my problem! I realized that the command execution is related to the vxWorks system clock! Of course, this is done in the DDK (driver development kit).

  The system clock is easily adjustable upper and then orders are shipped quickly.

  Thanks for your time

  Good day

  Cassidian

• Very slow WiFi

  For about a month now, our wi - fi is very slow and make it worse. We noticed it on our iPhones and iPads in particular. I use an Apple's Time Capsule airport for my network and we have internet optical fiber to 100 MB, so not needed or used modem. Wired devices are as fast as lightning, but wi - fi is now almost unusable. Xfinity speed test shows the download speeds of 200 MBS on the wired devices.

  I rebooted my router Airport and no change. I use also 3 extensions Apple Airport.

  Any suggestion would be appreciated.

  Try to restore your device to factory settings. Take a look this Apple Support article:use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  If this is not enough, try recovery mode. Turn off your idevice to reset and then connect it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

• Very slow connection to the LAN on my Tecra M1

  Hi all

  I use a Toshiba Tecra M1 1 .6GHz, Win XP.

  I found that there is a problem with the connection to the local network. It is very slow. I takes about 5 minutes to download 1 MB. It's really a lot of time if I want to download and update some software over the internet.

  I also have an office. It is quite a bit old but the connection to the local network is much faster than my laptop; for example, I downloaded Windows Mediaplayer 10 - about 12 MB by using desktop and laptop at the same time to compare, the Office has taken 2-3 minutes while the laptop ate more than 20 minutes. I switched the cable between the office and cell phones, but it did not help.

  We know the problem and the solution?

  Much thanks.

  Hello

  Nick is on the right track. Who knows what runs in the background and applications who wants to access the internet. I recommend you to use the tool called Zone alarm. On this way, you will have full control over the applications that want to access the internet.

• Satellite Pro A100 very slow, especially at the start

  Hi, I just bought a laptop Satellite Pro A100. In general, I'm very happy with it, but I find it very slow especially at startup. It may take more than 5 minutes to be completely started.

  Are there settings or settings that I can do to fix this?

  Hello

  I agree with the previous user of the forum. I often heard that Norton slows down the system quickly. Try to remove it and test it again.

• Satellite A300 - very slow meeting of the Windows operating system

  Hello
  I have a Toshiba a300.
  I am facing a lot of problems with it.
  First of all, very slow sound at startup... I ' v read read this post

  -remove all unnecessary software system
  -remove the preinstalled application antivir and installing Avira Antivir software (without a doubt the best for me because he didn't need as many resources)
  -deactivation of departure for everything that I have addresses Don ¢ ' t need (MSCONFIG)
  -Disabling all components material I don't need in the Manager device (modem, multicard reader, PCMCIA slot, firewire)

  Pls u can mention precisely what are all unnecessary software in my laptop... It's first time im having a computer so I donnno much...
  I use kaspersky anti virus. Should I switch to avira? I am also faced with another problem. My led on/off function does not work instead, it acts as a mute button. It used to be well earlier... I tried support button (dimmer.exe), Setup of HW, but both failed... then I uninstalled reinstalled n some added value pack from an Australian site, but who has not too... pls help... I'm p * OFF... all the suggestions/help will be really appreciated.

  > Pls u can mention precisely what are all s unnecessary software in my laptop...

  Only you can decide what software is not important to you
  Toshiba has preinstalled many different programs. Most of these applications control certain features of the laptop as keys FN, controls, etc., but of course, this software needs of material resources and slow down the start-up procedure.

  In MSCONFIG, you can disable some processes and could test how the laptop would be without these applications.

  In addition, I recommend to update or remove the Tempro tool, which has been pre-installed by Toshiba!

  The Avira scanner is great. I m using both and it s free.
  This eater of low material s and, therefore, the laptop should start more quickly instead of using Avira Kaspersky.

• Lenovo Ideapad Y560 very slow just after the start

  Hello!

  I have a weird problem with my laptop Ideapad Y560 (2 years). I was wondering if any of you have a similar problem and looking for a possible solution.

  As soon as I start the laptop (either), it is very slow for the first 3-4 minutes. Nothing to really works or opens, it hangs for a while and runs my entries of keyboard and mouse with a considerable delay. After this period of 3-4 minutes, it works perfectly fine, also responds well/crisp as the lappy was brand new. I can't understand why he behaves in this way.

  I almost never stop the laptop and generally just put it to sleep. However, I have this problem (as described above) if I turn on the lappy a stop or a State of sleep also. Anyone seen this before? Could someone please suggest possible solutions? Any help is very appreciated! Thank you!

  lprassanth wrote:

  Thank you. I did it twice and I got a message that he "did not for any breach of integrity" at every opportunity. Restarting the machine. Problem persists.

  Try the manual cleaning of Windows and then follow-up with defrag.

• Very slow computer after the latest updates

  Hello

  I've updated one of my PCs running Vista x 64 updates of security two days ago.
  Now that the systems takes more than 15 minutes just to start at the opening screen of session and as much time again to get on the desktop.
  The mouse cursor is always fast as usual, but everything else including the caret blink time is super slow.

  This is a really clean system which is used strictly for dedicated 3D work, so he has nothing but Max, EU3 and WinZip on it.  It is not used for Internet access.
  No hardware or software changes attempted in several months, other than updates Windows System.
  Intel C2Q Q6600, 8 GB 1066 RAM, NVidia 8800GTS 512, WD 500 GB HD, ASUS P5K mobo.

  I was wondering if anyone else has experienced this problem with updates, especially as it's really painful trying to solve the problems since that it literally takes hours to try whatever it locate either changes the problem.  I'll do a wipe and reinstall if I have to spend a lot more time with reboots, it will be faster.

  I am answering my own question here... :-)
  Maybe it will help someone else and save a few hours of work waiting for the slow start to fix things.

  For those who are interested: the OS is Vista Home Premium x 64. Material has been listed above. It is a high-end with hardware system high range, coolers, cases, power supply, etc.
  This is not a system of job full time, it is used only for specific work I usually do a few hours on one or two days a week.

  I timed it really starts the Welcome screen and it is more than 45 minutes. lol :-D
  I pulled off the side of the case and noticed that the HDD was just chewing on something.
  Start in safe mode was also just as painfully slow as standard start (argh).

  Regarding the updates of Windows, I have this system set to inform only, so I only install updates at the end of all the days that I work on the computer. Where my assumption that it's a matter of update that caused the problem, since nothing ever changes, on this subject - files are still saved out to a network server.

  However, once I could get on the computer, I noticed that I had also installed Windows Live Mail top the same day I did the updates of Windows (two days ago). WLM has been installed just to get a screenshot of it for my blog, it was never really used for Internet e-mail, it should be uninstalled some time on one of the next system bootups.

  Then... Installation apparently a combination of WLM or the latest Windows updates has completely borked something on the computer starts.
  I got my DVD of Vista, it started, ran the Startup Repair. Now, the system works very well. WLM has been uninstalled in the case where it has been part or all of the guilty.
  As with a PC, it could be something to do with the specific hardware and software configuration, the order of WLM and updates installed, specific updates installed, etc..

  I would recommend that anyone with a similar configuration be sure to install WLM or updates in the estate where they fall in the same question.
  Just don't panic if you have problems, try a DVD Vista Startup Repair. :-)

• Computer is very slow, especially at the start

  Original title: is there a list of commands I can get help on this computer?

  I know msconfig, but are there more orders I can do things like own regulations to do my comp. running faster. Its very slow especially on start-ups. Thank you

  Hello

  You did changes to the computer before this problem?

  Microsoft does not recommend the use of any registry cleaning software because any incorrect registry entry might prevent your computer from starting properly.

  Try to perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  See the following articles that might help you to improve the performance of the computer.
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Maintenance tasks that improve performance
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Let us know if this helped.

• New HP Envy M6 only detect ethernet cable, very slow wifi

  Hello

  Sometimes, the wifi, I get 1mpbs on a 50mpps connection. I'll upload to 5 Mbps, which is normal (but why are my download speeds so slow?) Laptops and other devices work perfectly. Closer to my wireless router (well it's not a router, it is a TG862 of Arris Comcast) seems to alleviate the problem, but... I am no farther than 25 feet away from him in my room!

  I tried to solve this problem by updating the BIOS and the driver Qualcomm Atheros 9485 and apparently not helped at all.

  My concern REALLY, it's THAT EVERYTHING, nothing happens when I plug my ethernet cable into the left side of my laptop. It is in the correct port. It works fine in my xbox, my other laptop and my desktop computer. Other ethernet cables do not work or the other. I noticed there are two holes (which resemble lights) that don't light up, right where I plug the Ethernet cable.

  http://support.HP.com/us-en/document/c03363657

  I followed these instructions piece by piece without success.

  Should I have a burst network card? Help, please! This notebook is so new and brilliant, my other is old and destroyed and won't even take a load! I greatly appreciate it.

  Michael Siraco

  Hello Dollarsignrack,

  You have a problem with your network connection.

  It could be a defective material you may be substituted.

  First, turn off the computer.
  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  This should help to detect the Ethernet port.
  When the computer starts up, check if everything is working.

  If it is still slow to go to HP.com and update the BIOS and software framework.

  Here are links to the updates.

  BIOS

  Software structure

  If you do not need to have the unit repaired.

  Here is a link to the phone number that you can call to HP.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• X 220 very slow fill in the list of programs in the control panel

  Hello guys,.

  I have 3 thinkpads to home, 1 T420, 1 X 200 and 1 X 220, who happens to have the highest spec (maxed out, i7, Intel SSD 320, 8 GB ram). All are running Win7 X 64, but strangely X 220 is very slow fill the program list when I select panel-> uninstall a program. The two other machine can finish populating the list in less than 3 seconds, while X 220 sometims needs more than 30 seconds to fill completely the list.

  The number of programs installed in X 220 97, how many not much more than the other two. I'm very * beep * on my X 220 and has the latest drivers of Lenovo.

  Other than this issue, the laptop is majorly without problem. Not sure, it's software or hardware problem.

  Someone has an idea of what went wrong or have similar problem?

  Thank you

  Thanks for all the answers. It turns out that this has something to do with group policy that applies to all computers in the company, others in our society have the same problem of population slow list.

  The reason that our home computers do not have this problem is because they are not imposed to politics.

• Very slow to open the components Panel

  The site I am building a lot of image assets. Whenever I open the active panel, it takes a minute or more to open. I use a macbook pro retina 2015 with 16 GB of ram and a processor i7. All other applications work like a charm, but Adobe Muse really needs a lot of work in terms of stability and performance. The new version is especially very slow. I think Adobe Muse needs to work on the bug fixes and performance at this stage and constantly release new features first.

  Hi Preran,

  In fact, I have download the latest version last night and I am pleased to announce that the question was indeed fixed in this new construction. Kudos to the team for a job well done! This is good progress. But the active panel still need a lot of work. I have not to mention them here and create a new thread for this private place in the beta program. Thanks for your help!

• very slow replicat. seen the shift which increases regularly

  Hi all
  I have 1 clip that must pass 8 tables and 1 replicat. The source data are updated every 4 minutes and currently about 50K records change. What I noticed that the replicate is not able to catch up with the excerpts and the LAG continue to increase regularly. Please notify.
  
  I have other excerpts on the same server are fine, but they do not access tables that change very frequently.
  
  Please let me know if you need more information.

  You can now come some ways. If it comes to Oracle, you can run an AWR report and you will probably see that at least one of your tables makes a scan of full table on updates or deletes. If you add this to your replicat and extract param files, you can see if your rate of transactions going upwards or downwards through the report file:
  reportcount every 5 minutes, rate

  There is also the command 'stats' ggsci with the 'reportrate' option that you can enter in manually (or with a script) at intervals to see if the increase in the volume corresponds with a lag.

  At the end of the day, you will probably need to add a unique index or PK at some target tables or get out the slow tables in their own replicat (s).

  Good luck
  -joe