Very slow computer after the latest updates

Similar Questions

• Copying files very slow USB after the ICS update

  Does anyone else have a problem?

  I'm trying to copy a 500 MB external hard drive (FAT32) file on the internal SD card and just of crawls and crashes. It used to be swift.

  Does anyone else know this? Any other file manager would be faster?

  Which file manager you use? Have you tried HD file manager? I've been using it to copy a file over 700 MB of a flash drive to SD internal card without any problems "slow".

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Computer freezing after the latest updates of Windows

  Unfortunately the windows restore has no restore points and was not yet active.  AAAAAAHHHHHHH.  I just got this computer last month and it's been great, and now I'm back to being a tech.  Large.

  Hello

  ·         Who were the latest updates installed on the computer?

  ·         The computer hangs or crashes the browser when it is on YouTube?

  You can check the same thing using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You can try to uninstall and reinstall the updates manually and check if this helps solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  To install the updates:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone 5 slow work after the last update

  My iPhone 5 works much more slowly after the last update (iOS 9.2.1).

  Increased delay time after pressing an application, multitasking is too slow.

  Applications like Facebook pull a little longer to open now.

  The 'Phone' application is slow processing, including a shift before recent update.

  Autonomy is greatly reduced and wears out quickly on 3G or wifi.

  I would ask if it is the same with each i5 user, making it a common problem or is it just with my camera?

  Also if there is a solution to this problem...?

  You must wait for the next update for iOS

• After the latest updates from Microsoft, my Internet Backgammon supplied with Windows 7 no longer works. It is a dead link and the game opens same. That's happened?

  I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition.  However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works.  It's just a dead link.  I can click on it, but nothing happens.  Not even an ounce of trying to open.  It's just 'died '.  I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games?  Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play.  I am referring to the one in the Games folder, which is installed with Windows 7.  I play this game almost every day, so I hope that it will be restored.  I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...

  Hi Kentuckywoman,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.

  -What are the updates installed recently?

  Method 1: I suggest you to perform system restore and see if it helps.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.

  Step 1: Uninstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.

  (d) to restart the computer.

  Step 2: Reinstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• PunkBuster not working after the latest updates of Windows

  Hello

  Since I installed the latest updates for Vista x 64, I continue to pounce on COD5 with this exception:

  Application CoDWaWmp.exe, version 1.5.1220.0, time stamp 0x4a5241f6, failed module pbcl.dll, version 0.0.0.0, time stamp 0x4a5cb487, exception 0xc0000005, fault offset 0 code x 00026914, 0x5d0, failing application start 0x01ca36117f69c74e process id.

  The problem seems to be related to the Punkbuster client. Before the latest updates, I don't have a problem.
  For Windows XP, a similar problem was introduced with KB917422 (in connection with Kaspersky anti virus I think).

  Any thoughts on this topic?

  Best regards, Wilbert

  SRY, but if PB doesn't work, you don't have to format your PC.
  Just try to reinstall PB.

• Very slow download after the update February 10

  After the update automated around Feb 10th, photos are slowly and web video a crawl - for every one second of game-playing, it hangs for 10 seconds or more.

  Download Adobe software update takes forever - about 10 kb/s or less. Everything slowed to a crawl.  What is going on?

  I have a DELL reconditioned with XP and a custom-built Q8900 Intel Vista and it happens on both machines.

  I think of restoring to the point of pre-2/10 but do not want to be vulnerable.  Any person with knowledge or patch fix, feel free to post... help!

  johnnydj,
  After testing mode safe mode with networking, I suggest that you make sure that your NETWORK card drivers are up to date.  You can also see if there is a firmware upgrade for the router you have.  Alternatively, you can perform a clean boot to see if other software can interfere with your system.  Also, make sure that your security software is up-to-date.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lenovo Ideapad Y560 very slow just after the start

  Hello!

  I have a weird problem with my laptop Ideapad Y560 (2 years). I was wondering if any of you have a similar problem and looking for a possible solution.

  As soon as I start the laptop (either), it is very slow for the first 3-4 minutes. Nothing to really works or opens, it hangs for a while and runs my entries of keyboard and mouse with a considerable delay. After this period of 3-4 minutes, it works perfectly fine, also responds well/crisp as the lappy was brand new. I can't understand why he behaves in this way.

  I almost never stop the laptop and generally just put it to sleep. However, I have this problem (as described above) if I turn on the lappy a stop or a State of sleep also. Anyone seen this before? Could someone please suggest possible solutions? Any help is very appreciated! Thank you!

  lprassanth wrote:

  Thank you. I did it twice and I got a message that he "did not for any breach of integrity" at every opportunity. Restarting the machine. Problem persists.

  Try the manual cleaning of Windows and then follow-up with defrag.

• W7 refuses to work after the latest updates!

  Last week a few updates came through for W7 Home Premium 64-bit (not sure which service pack, even if it must be later because no SP update has not developed) and they have been installed. After the restart, if I clicked on what whether the computer freezes. This happens over and over again, and I can now run only from my computer in safe mode!

  Windows Update does not try to solve this problem, no troubleshooting did nothing and System Restore does not work either! The only program that I can open is WLM.

  It is absolutely ridiculous that I have to load Windows from a system image saved on an external if I can't find a solution soon, all of the update of the software manufacturer. Annoyingly, I does not reach the center of update for updates, otherwise I would include them.

  The foregoing applies to in safe mode, by the way. I can literally do nothing outside of safe mode.

  Microsoft, this issue please!

  @CREED550 only: Follow the instructions in the message marked as ANSWER in this thread to restore your computer to a secure State-online http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/bc95f2f0-7968-4bd0-8de5-70b83db31fa6

  If you need help, please start your own, new thread to avoid confusion. Thank you.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with aero after the latest updates

  Hello

  Someone had a problem with the latest Microsoft security updates
  touching the aero desktop theme.

  Since I downloaded the updates my aero as a theme stopped working.
  I did a roll windows back but I still have the same problems.

  The updates are #KB971029 and #KB971029 the
  updates have been downloaded on 03/17/11

  I hope someone can help with this problem.

  All the best

  Philip Davies

  Hello

  OK try to remove these updates to see if that helps. Sometimes manually
  install the updates one at a time will prevent topics such as this one (if the)
  mises_a_jour have been the question).

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Or

  The problems with the removal of updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  AFTER removal of updates, do a system restore to before
  updates have been applied to the origin. Therefore, affect the total amount of
  updates are deleted.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =======================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ======================================================

  If necessary try a repair Installation which allows to keep the programs and data however
  redundant backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• Is anyone of another search slow mail after the last update of El Capitan?

  I think slower mail (more clearly than anything else) after the last El Capitan upgraded 10.11.4 - but I don't see any other chatter about this on the web. Anyone find this?

  No, not here.

• Reference Dell coming 8 Pro 64 GB Wireless does not start after the latest updates including 8.1 update 1

  Well this morning not to wireless and windows reported an error on the boot device.  So I made a restore point from a week ago and it works.  Thanks a lot for dell.  Is there a fix. Or should I just not do updates for a while.  And there is no driver to the backup on.

  If I can assume that you have the latest version of the bios, installed wifi and wapi drivers I can offer this as a possible solution to the cause of install 8.1 update my first attempt failed as well. http://support.Microsoft.com/kb/947821?WA=wsignin1.

• How can I fix the very slow response after the wake up the computer from sleep mode?

  Never had this problem until a few days ago. Using Windows 7. I want to use the "sleep mode" whenever I leave my office (be it for a few minutes or several hours). Always came back just as I left it (tabs, work-in-progress, etc.) until recently. If I reboot, everything of fine, up to what I use mode "time" again. So painful.

  Thanks for the tip. I disabled the accelerator according to your link and suggestions and the problem seems to have been resolved, at least for now!

• Notifications no longer work after the latest updates.

  As the title suggests, notifications for email, applications, pop etc. is no longer at the top right and no audio playback.  He grew up in another forum, so I'm posting here too.

  And before ask you, yes notifications are turned on and the audio clips are selected in the sound theme.

  Hello

  You are facing problems with notifications on Metro and audio applications after installing the updates.
   
  -Updates you installed recently?
  -You have all updates are installed on your computer?
   
  Method 1: I suggest you run the troubleshooter App from the link and if it helps.
  http://go.Microsoft.com/fwlink/?LinkId=268423
  
  Method 2: I also suggest you to follow the steps from the link and check if the problem persists.
  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  Another reference:

  http://Windows.Microsoft.com/en-us/Windows-8/how-manage-notifications

   
  I hope this helps.