VI requested is not loaded in memory on the server computer

Similar Questions

• Distance before panels: vi requested is not loaded in memory on the server computer

  I have a program that uses dynamically loading the facades which are access via a web page using panels before remote. I have several projects doing this successfully. This new program, however, does not properly work in web pages. I get the message "requested vi is not loaded in memory on the server computer." The main difference for this new program, it's that I have the project organized in libraries. For some reason, the path specified for the front panels does not resolve correctly. The Organization of the project are:

  

  And here is the HTML code to access the front panel:

  I can't understand why the front will not load. I know this has something to do with the project libraries, and how to identify the correct path to the VI, but I don't know what I'm doing wrong. I tried to run the project in debug mode and build an executable and executes. These two with the same message. I know that the panels are in memory and running. And as I said earlier, I have several other projects that work well, but those who do not use libraries.

  Any help or idea would be greatly appreciated. Thank you.

  I found the problem. Finally, there is an another executable running using the default port has been specified for the development environment. In my case, I put it to 10500. Thus, the built application used this port for the Web server of NOR. The solution ended up being to specify another listening port in the niwebserver.conf file that is created when you build an application.

  

  After this change, everything was fine. Loads of everything very well and I can run multiple applications.

• Asked that VI is not loaded in memory on the server computer

  Hi all

  While trying to access remote VI it gives me a message connected VI is not in memory of the server computer.
  Is anyone here can say how can I put the VI to the memory of the server computer that I want to be accessed remotely?

  Thank you

  Hey Jousset,.

  You try to connect to the VI using remote façade panels?  What is the network configuration you use?  Is the VI whereby you connect running on the server computer?

  Some great troubleshooting steps to try to start can be found here.

  Please let me know if you're still having problems!

  Kind regards

  KiraT

• Help, please! Trendy laptop, do not load, storage capacity of the portable computer is low...

  I have a HP Envy Ultrabook, who settled with Windows 7.  When I tried to turn it on today, it not light.  I think it was just short of battery connected and received the message, "the system has detected the following battery storage capacity is very low.»  For optimal performance the battery may need to be replaced. »

  Once logged into my account, I noticed that the battery was "connected, but does not charge."  I tried many remedies online, as the battery method Microsoft ACPI compatible control the uninstalling and turning and turn it on again.  But nothing seems to work.  I even checked to see if it was a problem with Windows 7, and I saw that Windows 7 eats battery life very quickly, but I don't think it happened the day after like me did it.  I was able to use it for 4 hours without recharge yesterday until my battery has reached 10%.

  Please help me.  I've only had my laptop for 6 months now, way earlier than my 1 year warranty, and I was able to use my laptop, unplugged, for a good 4 hours until today.  Why is did this happen all of a sudden?

  Another thing I might add is, I tried to upgrade to Windows 8, but I ended up doing a pause the download and I closed out of the window without leaving Windows 8 download.  But it's the only thing I can think that it is out of the ordinary.

  Looks like I couldn't do something for myself, I had to send to HP for repair, laptop now upwards and being run, but thanks for the help all who responded!

• Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

  I tried to backup my C folder on a hard disk extrenal and received the following message:

  
  OT: Backup failed Windows7 0x8078002A error Code.
  Quote
  One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
  End of quote
  Can someone advise me?
  Nitin

  Hello

  Method 1
  Check the shadow copy Volume service in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. Locate the Volume Shadow Copy service

  Make sure that the startup type is automatic. Steps to set the auto services

  a. Locate the service

  b. right-click on the service

  c. If the service is stopped and then starts the service

  d. Select Properties

  e. and in startup type, select automatic

  Method 2
  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• I'm considering buying a computer with Windows 7. Is there a driver for my Canon Multipass F50 printer? I have Office Professional for XP - can I load office software on the new computer with Windows 7?

  I'm considering buying a computer with Windows 7.  Is there a driver for my Canon Multipass F50 printer?  I have Office Professional for XP - can I load office software on the new computer with Windows 7?

  Page drivers Canon MultiPASS F50 & the downloads shows nothing for Windows 7 (or even for Vista), so I doubt that it works.

  Microsoft Office XP is not compatible with Windows 7.  Office 2003 and Office 2007 are.

  I wish I had better news for you.  :-(

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.

• Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  Hello
  I am not able to coonect to a server by using the code below.
  
  If I try the same code on the server to connect it self, it works well. But when I try to connect to another server gives the error below. And I use the IBM Jdk when getting this error. Y at - it a setting to avoid this error.
  
  Error:
  INFO: Add /usr/jdk/instances/jdk1.6.0/jre/lib/ext/sunpkcs11.jar to the CLASSPATH of the extension
  ConfigurationLoader
  November 30, 2010 16:33:12 < clinit > com.sshtools.j2ssh.transport.publickey.SshKeyPairFactory
  INFO: Loading public key algorithms
  Error so that SFTP
  java.util.NoSuchElementException
  at java.util.StringTokenizer.nextToken(StringTokenizer.java:332)
  at java.util.StringTokenizer.nextElement(StringTokenizer.java:390)
  to com.sshtools.j2ssh.transport.AbstractKnownHostsKeyVerification. < init >(Unknown Source)
  to com.sshtools.j2ssh.transport.ConsoleKnownHostsKeyVerification. < init >(Unknown Source)
  at com.sshtools.j2ssh.SshClient.connect (unknown Source)
  at fileTransfer.connectToServer(fileTransfer.java:18)
  at fileTransfer.main(fileTransfer.java:56)
  
  
  
  Code:
  public static boolean connectToServer (String serverIp, int serverPort, String userId, String password)
  {
  SFC SshClient = null;
  try {}
  System.out.println ("inside the Try to like his SFTP");
  ConfigurationLoader.initialize (false);
  System.out.println ("ConfigurationLoader");
  
  SFC = new SshClient();
  SFC. Connect (Ipserver, serverPort);
  System.out.println ("SFC. Connect");
  
  PasswordAuthenticationClient pwd = new PasswordAuthenticationClient();
  
  pwd.setUsername (userId);
  
  pwd.setPassword (password);
  
  int checkAuth = sfc.authenticate (pwd);
  System.out.println ("checkAuth" + checkAuth);
  
  If (checkAuth == 4) {}
  System.out.println ("AuthenticationProtocolState.Complete");
  
  SFTP SftpClient = sfc.openSftpClient ();
  sftp.Quit ();
  SFC. Disconnect();
  }
  on the other
  {
  throw new Exception ("invalid user name or password for the user");
  }
  }
  catch (System.Exception e)
  {
  System.out.println ("Error While SFTP");
  SFC. Disconnect();
  e.getStackTrace ();
  Returns false;
  }
  Returns true;
  }

  Swapped

  Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  @O.P.
  Don't, don't.
  In the future, to choose the most appropriate forum and make your post.
  Swap shall be the same as the rude spamming.
  I'm not aware of any web-site-of-value forum that would promote the permutation in its directions on the label.

  ... and for what is "Urgent"?
  This web site is for the end-user community gather and discuss various topics in general conversations. Your time constraints are irrelevant. If you need real support for something, then log a support case and pay for a quick response.

  See the FAQ in the link at the top of the page.

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• I get this when I try to send e-mail with an attachment that Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Hotmail as well as all the problems of Windows Live are Windows Live Solution Center. It's their jurisdiction.

  Please post on forum discussions for Hotmail:
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Firefox does not load pages unless moves the mouse or keyboard is pressed

  Hello

  I saw this problem listed several times before this post, but none of the solutions have helped me.

  I am using Firefox for ages and the latest 3 updates or so were expose this problem. When I try to load a website, Firefox will start to takes me to the page and then hang. The circle in the tab will stop moving and it will stay there until I move the mouse or press a key on the keyboard. As long as the mouse moves permanently or the keyboard keys are pressed, the page will load very well. The same thing happens with YouTube. The video starts and then freeze unless the keyboard/mouse is moved. Firefox also has this problem when I try to download a file from a Web site. The download starts and then hang on until I move the mouse or press a button, then it will continue for a few seconds and hang on again until I repeat the movement of the mouse or press the keyboard button.

  So far, I tried to update Firefox, Java and Flash; Starting Firefox in Safe Mode; uninstalling and reinstalling Firefox: do a complete uninstall and reinstall of Firefox with removing profile and creation. I ran ad next and malware detection with no infection found tools: Malwarebytes' Anti-Malware, SuperAntispyware, and AdwCleaner scan Microsoft security, Windows Defender, Spybot Search & Destroy, utility Kasperky free Security Scan and Anti-rootkit TDSSKiller.

  The only thing I tried that 'seemed' to work was from Windows Mode safe mode with networking and run Firefox there. I was able to watch YouTube videos without freezing and websites seem to load properly. Of course, I can't run in Mode safe all the time.

  I've attached a screenshot of what it looks like when Firefox crashes on Google News. Note that the images in part loading, but a good number of them is waiting or not loaded.

  I hope someone can help me, because I like Firefox and I wouldn't switch to Chrome or (shudder) IE.

  Thank you in advance for your help!

  
  

• Firefox will not load https pages. gives the security warning and will not accept an exception.

  I had problems with Firefox and some sites for about a year, and it is located in my laptop. I have no problems when using my desktop at work or my dad's cell phone in his house. Some sites simply returns a page of text style; no html. Other sites give me a security certificate warning and FF will not accept an exception for this site, either by clicking the button or manually enter the site as an exception. Tonight, GOOGLE will not load again! Why, it's trying to load on an https server, I don't know, however. Several other sites have also begun does not not and are also trying to load it on a secure server.

  Use Kaspersky, AVAST 2015, ESET, BitDefender or Microsoft family safety? These are among the most popular security programs which have a function to intercept your Internet connections and filter your traffic. When it's a secure site, in order to be able to decrypt and inspect your communications, the software must present a false certificate for Firefox. Sometimes, the software is not able to configure Firefox for this, or if you use the function of Reset of Firefox, the trust is broken and needs to be put in place again.

  Unfortunately, the same symptoms can appear with some malicious software.

  If you look at the second half of the post of Philipp, you see where you can check the section 'From' the certificate. This usually allows to identify the culprit. Can you take a look and report what you find?

• Satellite 1800 - 752S does not load Windowx XP in the beginning upward

  Good day to you all,.
  While I worked with the software 'Money', suddenly the "Hourglass" was released on the screen for a few seconds and the machine frooze.
  Impossible to do anything to stop it with the start/stop button.
  Sart up even once, windowz XP will not load and a message comes on the screen and read follow:

  First: tomorrow contact Toshiba,
  The latter: press f12 for the boot device selection menu (anything happen with this function)
  Then the following are displayed:
  Version Intel boot agent 4.0.18
  Copyright (C) 1997-2001 Intel corporation
  PXE - E61: media test failure, check cable of
  PXE - MOF: exit intel PXE rom
  Insert system disk in drive
  Press any key when ready
  What is happenning, I do not have a system disk, but only the recovery cd, I would like to know what I need to do and what is the procedure?

  Thank you very much for her
  See you all and best regards

  JCP

  Hi James,

  The message you describe indicates that your laptop is trying to boot from a connection to the local network. Normally, this is the last set in your BIOS selectable boot devices. The usual order is to have the HARD drive first followed by the CD and then the LAN option (it can also be a floppy drive in there too).

  If your defined boot device selection command is similar to the above it would indicate that your laptop has been unable to boot from your hard drive and since he was probably not a CD or DVD in place at the time where he then tried to boot from the local network as the last option available.

  If you turn on your laptop and then hold down the F12 key until the phone beeps you should be able to see the boot device selection screen. If the sequence shows the HARD drive of first or second in the list, then I think that your hard drive may have failed and the unit can charge is no longer the operating system of it. In this case, you can try to boot from your recovery CD by loading the CD and then turn your laptop while now the key 'C' until the machine beeps.

  Kind regards

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.