VI works exe does not throw an error

Similar Questions

• Run VI Invoke node: VI works, EXE does not work?

  It is LV2009 without patches or updates. I call buffer.vi of static reference with a collection of nodes to invoke to run a VI. I don't have a very good reason for it, but don't want this code on the block diagram. I can't wait to put a lot of effort in this since I can just drag the code on the main scheme and I am sure it will work, but I do not understand why it gives me error 1000: VI not in a State compatible with this operation?

  In the EXE file, when I check the status of the execution of the buffer.vi until I say it runs, sometimes bad. Same code in VI, sometimes slow. I also tried to replace the static VI reference with a reference open VI by using the name of the buffer and received the same error message. I have the buffer VI included in the compilation under always included.

  So I was building an example of project because I didn't post all, boredom was the example ON what EXE has no error. WTF. Then I realized that I had another call from node in the boot sequence. OOPS. I put that in there thinking that the only way it would be mistake was if the VI was running before he called, in this case I wanted an abortion there. It turns out also-error (1044 locked VI) when running in an EXE file, even if this particular node using says he works with the runtime. SO, he tried to abort a VI that was not working. The initial error, 1000, just said not compatible with call node state, did not say that one.

  Yes, sorry for the trouble and thanks for the help. Maybe someday I'll understand the problem that I was led to this, guess who is the fact that I can't debug EXEs. Kind of, I think it has something to do with an XControl I always use it because they always appear as corrupted files just before that the debugger fails. Anyway, thanks again, I'll plug that into the real system and see what else does not work.

• increase does not throw an error

  Hi all
  
  I have trouble with the following function raise an error when the no_data_found scenario is tested: -.
  
  
  
  function get_wt_date_val
  + (param_name_in varchar2 +)
  + warehouse_code_in varchar2 +.
  + wht_code_in varchar2 +.
  + default_value_in date default null) +.
  date of return
  
  is
  
  
  cursor cr_app_param (p_param_name varchar2, varchar2, varchar2 p_wht_code p_warehouse_code) is
  Select to_date (param_value)
  of wt_parameters
  where param_name = p_param_name
  and warehouse_code = p_warehouse_code
  and wht_code = p_wht_code;
  
  date of v_param_value;
  
  
  Start
  
  err_rec.module_name: = ' PKDB_PARAMS. GET_WT_DATE_VAL';
  err_rec. Notes: = 'PARAM_NAME =' | param_name_in;
  
  Open cr_app_param (param_name_in, warehouse_code_in, wht_code_in);
  extraction cr_app_param
  in v_param_value;
  If cr_app_param % notfound then
  
  If default_value_in is null then
  err_rec. Notes: = 'PARAM_NAME' | param_name_in | ' WAREHOUSE '. warehouse_code_in | ' WHT ' | wht_code_in | ' HAS NO VALUE OR THE DEFAULT VALUE ';
  close cr_app_param;
  raise the no_data_found;
  on the other
  close cr_app_param;
  Return default_value_in;
  end if;
  
  on the other
  close cr_app_param;
  Return v_param_value;
  
  end if;
  
  exception
  while others then
  pdb_log_error (err_rec);
  lift;
  
  end;
  
  
  When I call the function to generate the no_data_found built by exception, he calls the part of pdb_log_error (inserts into a table of errors), but it returns a null line. that does not seem to exceute the final command "raise" I expect (raise an error).
  
  Would appreciate any help.
  
  Dan.

  I mean a SQL statement?

  No data found is not triggered within SQL.

  SQL> create or replace function f1
    2  return number
    3  as
    4  begin
    5   raise no_data_found;
    6  end;
    7  /
  
  Function created.
  
  SQL> var n number
  SQL> exec :n := f1;
  BEGIN :n := f1; END;
  
  *
  ERROR at line 1:
  ORA-01403: no data found
  ORA-06512: at "RIMS.F1", line 5
  ORA-06512: at line 1
  
  SQL> select f1 from dual;
  
          F1
  ----------
  
  SQL> 
  

• Explorer.exe does not start with error 142

  Explorer.exe opens in safe mode but not in normal mode. When I force it to start using the task (from the Task Manager) I get the error "the application could not start correctly (0xc0000142). Click OK to close the application. "

  What is the cause of an error in 142?

  Hi Michael,

  Thanks for the reply.

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If any virus or malware files are detected during the scan, there is a risk of data loss because infected files will be deleted.
   

  Also check if there are errors listed in Event Viewer.

  Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

  To open the journals please follow the steps.

  Press the Windows key + W

  Type 'view event logs"on the splash screen and press enter.

  Hope this information helps. REP [having status so that we can help you.

• Windows 7 VB 6.0 project exe does not work in windows XP

  Hello!

  Currently, I switched from windows Xp(sp 3) to Windows 7 (32 bit). Now, I did more recent SalesProject.exe by using Visual Basic 6.0 in Windows 7, its fine on Win work 7systems. But even SalesProject.exe does not work when I run it on Windows Xp systems. It returns error on Win Xp ' class is not compatible Automation).

  Please see the following sample code in VB6.0

  [CODE]

  Private Sub Form_Load()
                
  MsgBox ("stage 1") ' run Ok

  Dim rs as new ADODB. Recordset ' (I tried ADO 2.8 and 2.0 as) error comes on this line

  ... etc.
  End Sub

  [/ CODE]

  Any help?

  Thank you

  Hello

  Because the problem is related to Visual Basic, I recommend you post this question in the Forums of Visual Basic.

• Implementation error "the application BTTray.exe does not able to initialize properly" soon after connecting to Vista Premium 32 bit. Same error when you try to connect to Citrix, "the wfcrun32.exe application could not initialize correctly.

  On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
  Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
  My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
  Is could someone please help me get rid of these annoying errors?

  I came across a similar story, while answering a different question, earlier today.  It seems to involve Dell machines and a corrupt file of the MFC80.dll.  If it's useful to you or not, I'm not sure, in any case, you would like to read this link.

  2.0 secure Local data RMCPlg.exe and BTTray.exe errors
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en

  The previous post, I referred to was this one.

  The Groove application error
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c

• SMffb_302.exe does not no error

  I get an error message (SMffb_302.exe does not). I just tried to download an antivirus program, but my computer will not install it. Any ideas on how to solve this problem? Thanks for the help.

  I get an error message (SMffb_302.exe does not). I just tried to download an antivirus program, but my computer will not install it. Any ideas on how to solve this problem? Thanks for the help.

  Hey flipside14

  Looks like maybe it's malware

  read the information, a person found thereon in the link to mcafee communities below

  https://community.McAfee.com/thread/32823

  and follow the advice below to scan and remove malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If that doesn't work not in normal mode do all of the above works in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Explorer.exe does not work correctly.

  Hello everyone.

  My name is George Sebros and I have a Toshiba Satellite A300.
  The reason why I post this new topic, it is that I need a little help from someone who knows something about my above problem:
  One day, about 2 months ago... I turn on my Satellite A300.
  When he connected, not only none of my icons appeared but also the start menu does not...
  The only thing that appeared in a screen totally BLACK, has been my folder "Documents and Settings" which opened automatically.
  There was no way I could find neither the start menu (I mean the taskbar), or my icons...
  So, whenever I close the Documents and Settings folder that had appeared, the only thing I could see was a black screen...
  It was a kind of shock to me and I couldn't believe my eyes...

  After a few days, I tried the well-known combination "Ctrl + Alt + Delete" to see what was working and what was not.
  Then I pressed the 'FILE', then 'NEW TASK' and finally, I typed the word 'explorer' in there.
  That's all! Suddenly, all turn to normal like the day before the problem started. I was happy with it, I could use my Satellite A300 again!
  However, it is an indirect way to do my work PC!
  This means that I'm still fain to use this indirect way to make the icons and the taskbar appears.
  This means that the 'explorer.exe' does not work?
  Many programs registry I use notify me on some HKY... files that contain DATA NON. I have to let you know that the explorer.exe is located in the (empty) folders.
  It indicates that transplant programs that I use, point out the problem I have?
  Can someone help me?

  I don't want to use the safe option of FORMATTING (also known as the FORMAT).
  Thanks in advance,
  George A. Sebros

  Hello

  Seems that your Vista is confused upward
  You can try to clean the registry and operating system in order to avoid the new installation of the OS.
  Please use the CCLeaner.

  I use this tool as well for free and it cleans the registry and other files at the time.
  It really helps!

  But if the BONE still does not work properly then you should try a new installation
  Of course, this procedure is radically because the HARD disk should be formatted, but on the other hand, you will get a clean and functional BONE

• "prism3d.exe does not work.

  What this means when a game box says "the prism3d.exe does not work.  The game is 18 wheels of steel convoy.

  Hi TomDimitroff,

  What version of Windows are you using?

  If you run Windows 7 OS (operating system), this game does not work.

  For more information about compatibility, see the link:

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=18%20Wheels%20Of%20Steel%3a%20Convoy&v=Valusoft&uid=&l=en&pf=0&pi=0&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=32-bit

  You can try to run the troubleshooter in the Windows program compatibility and also try to manually change the compatibility settings. See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• ShellExecute. exe does not work

  ShellExecute. exe does not work

  Hello

  -Did you change on your computer due to which the question has begun?
  -Is the issue specific to a particular application?

  Suggestions for a question on the help forums

• "u3ajwry.exe" does not work on startup. What does that mean?

  I get the message 'u3ajwry.exe' does not work. What does that mean?

  There is no entry listed in the start menu to the top

  Can't see the full command and nothing happens when I double click on the edge of the column rt hand.

  Errm. Is there is no entry in the msconfig Startup tab then there is no complete command to try and see!

  If this only happens at startup, it may be in via a mechanism not covered by msconfig. "Autoruns" should be. You can download Autoruns here

  http://TechNet.Microsoft.com/en-GB/sysinternals/bb963902.aspx

  Once again, to see the full command (equivalent column is called 'Image path' by Autoruns), you may need to widen the column by dragging the right edge of its title, the mouse pointer will change when you can drag to expand

  

• Windows media Center and games does not work, and does not work error message d3d8thk.dll

  my media library does not work and message d3d8thk.dll isn't continuous work to come.  How should I do?

  D3d8.dll error message could apply to any program that uses Microsoft DirectX, most video games.  I suggest following the steps below to solve the problem.

  1 restart your computer if you have not yet.

  D3d8.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. install the latest version of Microsoft DirectX.  Chances are, the upgrade to the latest version of DirectX will fix the d3d8.dll not found error.

  Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

  Note: The latest version of DirectX should be installed no matter if you are running Windows 7, Windows Vista or Windows XP.  Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  3. assuming that the latest version of Microsoft DirectX does not correct the error of d3d8.dll you receive, search for an installer of DirectX on your game or application CD or DVD.  Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

  Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4 uninstall the game or software program and then reinstall it again.  Something could have happened to the files in the program work with d3d8.dll and a reinstall might do the trick.

  5. restore the file d3d8.dll since the latest DirectX software package.  If the troubleshooting steps above have not worked to resolve your error d3d8.dll, try to extract the d3d8.dll individually from the downloadable package of DirectX.

  I hope the information is useful.

  Kind regards

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.