Viber messages backup

Similar Questions

• Windows 7 Home Premium... weekly back ups fail, get the message "backup failed."

  Recently my regular weekly back ups fail to find. Everything seems to go well until maybe halfway through the procedure when the backup stops & I get message "backup failed." Unfortunately, did not keep a note of relative error code... no useful guidance please.

  I'm glad to hear that you managed to solve your problem.

  Flash drives are a medium of reasonable storage but not the best. I recommend that get you a disk 2.5 "500 GB hard in a USB enclosure. They cost less than $60.00. Here's why:

  • They tend to be more reliable than flash drives.
  • They have a much greater capacity.
  • You can (and should!) use them to store an image of your installation.

  On this last point: this time you could solve your problem with system restore and FixIt. The next time you is maybe not so lucky. You may need to do a full reload of Windows which is tedious and often exceeding the capabilities of the user. By creating a picture now, you will be able to restore Windows to its current state, anything.

  You begin the process of creating image via the control panel / backup and restore.

  If you already have a backup flash drive then you could alternate backups between the flash and drive 500 GB. That would give you a rock solid backup system!

• Restore the Viber Messages to iPhone 6s

  Hello

  My nephew just delete some messages from my 6s Viber. It seems that he didn't back up via iCloud. Any suggestion to retrieve messages? Thank you

  No backup is no recovery.

  If you have saved to iCloud or iTunes, you can restore the backup and retrieve messages.

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Unable to take backup on Windows 7 get error code 0 x 81000019 and message backup Windows found errors on the media during a backup on it and can't use it for additional backups.

  Original title: backup Windows found errors on the media during a backup.

  original title: backup errors

  Whenever I try to do my monthly backup I get the following messages

  Backup Windows found errors on the media during a backup on it and can not use it for additional backups.

  Pleas write the following label on a blank media and insert it into D: /.

  I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?

  I now have an error 0 x 81000019

  Hello

  You did changes to the computer before the show?

  Method 1: Check if the shadow copy volume is running
  (a) click Start.
  (b) in the search box, type Services.msc.
  shadow copy Volume c) right-click and go to properties.
  (d) select Auto (Delayed) in the start menu type in the menu drop-down.

  Method 2: Clean boot
  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.microsoft.com/kb/929135.

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  Check all your drives to NTFS.

  This problem may occur if the drive is not NTFS format.

  Please follow the steps mentioned below to convert the reader:

  Using the Convert command

  1. click on the "Start" button, click "all programs" and click on "Accessories".

  2. right click on "command prompt" and click "run as administrator".

  3. in the window "Administrator: command prompt", type the following command and press ENTER.

  CONVERT %Drive% letter: / FS: NTFS

  letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:

  CONVERT F:/FS: NTFS

  4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:

  The type of the file system is FAT.

  Enter the name of the current volume of reader letter %Drive%:

  Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.

  5. when the conversion to NTFS is complete, the following line appears in the command prompt window:

  "Complete conversion".

  6. restart the computer and check the result.

  Hope this information is useful.

• When I try to back up my files on a hard drive peripheral I get this message "backup failed; Cannot find the specified file (0 x 80070002). Any help?

  Help me

  You can try running the Udate system preparation tool in your computer once, and then check to see if that takes care of the problem. You run the correct version of bits of this program after downloading from the links I provided below. If your computer is running a 32-bit version of Vista, download and run the version 32 bits of program and if it is a 64-bit version of Vista, download and run the 64 bit version of the program. If you don't know how to determine what version of bit, your system is running, take a look here to determine yours. Here are the links to download:

  for Vista 32 bit:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  for Vista 64-bit:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  First download and save the file to the link applicable to your computer. Double-click the downloaded file and then run it. Once he starts to run, it can appear to be locked to halfway through, do not cancel it assuming that it be stopped. It will continue to operate. This tool corrects missing components in the store Windows Servicing, a place where one can find the important system files. So depending on the State of the operating system, it can even take up to 2 or 3 hours to complete.

  Once he finished running, restart the computer once, and then try running backup. Let us know if this solves the problem or not.

• Can I create a PDF of all electronic mail messages backup in a folder in Windows Live mail?

  We have Adobe Acrobat Pro and ask Outlook on one of our computers (the rest use Live mail). In Outlook, there is a "Adobe" button that will allow us to select a folder and create a PDF multi-page of all emails in that folder. It creates a list that contains all the e-mail, complete messages with attachments that you can just scroll through them to see a history of correspondence. After a job is done, we can create these PDF files and put them in the folder so that the work on the server, it is a nice way to keep an easily reveiwed copy of all emails for work.

  I have not been able to find a way to do it from Live mail, did someone knows if it is possible and how to do... or is simply not an option with Live mail?

  This is not possible with Live Mail.  Acrobat is an add-in for Outlook (that you used it), but there is no similar functions for Live Mail.

• I get the message "Backup non-registered" with error code 0 x 80040154

  Original title: 0 x 80040154

  is constantly on saying not save regegisterd 0 x 80040154

  Hello

  1. when the question is is produced?
  2. you remember of any changes to your machine before the question?

  I suggest that you follow the steps mentioned below.

  Step 1:

  The problem may be related to your security program. I suggest you temporary disable anti-virus and firewall and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Run SFC analysis on your machine to verify if this is related to the missing or corrupted system file.

• Windows 7 - current backup - Message 'Windows backup has stopped working' when clicked details

  I really hope someone can help me solve this problem.

  From the center of the action of the message "backup Windows has stopped working" appears in all of the following situations:

  Change the settings - custom selection
  The details view button
  The details of the problem for this are:
  Signature of the problem:

  Problem event name: APPCRASH

  Application name: sdclt.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce79920

  Fault Module name: sdclt.exe

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce79920

  Exception code: c0000005

  Exception offset: 000000000006ec27

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 2057

  Additional information 1: 074f

  More information 2: 074fc5e23444d0689ec391e7e8fdce41

  3 more information: 9fb7

  Additional information 4: 9fb70d37706531bfd07966220029ca0e
  Curiously, however, the backup runs, and I can change the settings if I let you choose the selection option "auto - let windows choose".
  I did what follows in the hope of fix:
  Checked and disconnected the destination of backup disks.
  check all drives (chkdsk/f)
  Reboots (several)
  Disabled antivirus
  Validated executable file (it is identical to another machine where everything works)
  Any help gratefully received that I am at a loss!

  Hello

  You back up files to any external device?

  You can try the following and see if it helps.

  Method 1: System File Checker

  System File Checker will try to help you in fixing all corrupted files and folders from the computer.

  Please click on the link below:

  http://support.Microsoft.com/kb/929833

  Method 2: check if the Windows backup service is started or not.

  Follow these steps to search for the same thing.
  1. Select start > run and type services.msc.
  2. search for the Service backup Windows and double-click the Windows backup service to bring up Windows backup service properties window.
  3. Select automatic and then click Start.
  4. If this is not the case, it just select the menu drop down and then start.
  Also check if the service dependency for this service is started by following the same steps as above.
  First of all, to check which is the service dependency for Windows backup service follow these steps:
  1. Select start > run and type services.msc.
  2. search for the Service backup Windows and right-click on it. Click Properties and on the Dependencies tab, you will find the dependent services.
  3. write down these services that depend on and follow the 4 steps above and launch these services too.
   
   
   
  For more information, please see the links below:

  How Windows selects the files to back up?
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Back up and restore: frequently asked questions
  
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
   
   

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• "Backup of database error" message blackBerry Smartphones

  Hello

  I have the version "BOLD" 4.6.0.162 and Desktop Manager version 4.7 working with XP SP3.  In the past, I got my phone from backup.  Until several weeks ago, I am unable to back up my phone and received the message "backup of databases error."  It happens at different stages during the progress of the transfer.

  I followed the suggestions posted by françoys, http://supportforums.blackberry.com/rim/board/message?board.id=Bold&message.id=3676&query.id=57237#M3676, but still no go.

  My questions are:

  1 has any who found the solution yet?

  2. can I still perform the update (System, critical applications software, etc. via Desktop Manager) without losing files data base and music and picture my contact?

  3. is the advanced option in the backup and recovery solution?

  Thank you.

  Ok.  I solved the problem.

  I have 'forward' option of backup and moved the point by point.  There were a few elements indicated errors then I "cleaned" them.  Once all items have been moved, I did regularly back up again.  It worked fine now.

  Hope this might help other who is facing a similar problem.

• Backup iPhone via slow iCloud

  Hello community,

  I have always supported my Apple devices via iTunes. It's simple fast, easy and effective.

  Recently, I decided for my iPhone 6s I would also use the iCloud stat. I travel a lot and it would make sense that something happened where I needed and my MacBook was not available.

  I was wondering if someone else was painfully slow and inconsistent attempt to save as I. I have no pictures on the Filmstrip. All things irrelevant who do not need backup, I took off. It is located to save only what I "need". I am OCD with the phone is not as if I had a world of garbage out there.

  When I'm fully charged or load I try to save. First thing, it is that he says it will take 2 hours and then 1 hour then back to 2 hours. Internet connection is good, but it's also all browsing on another device almost impossible so that this back up is happening.

  He also got at the end of its 'hour' or however long it took... And then displays the most annoying message "backup could not be performed! Why does take so long?

  I even tried on a connection to the internet friends super fast fiber and it was exactly the same thing! I just turn it off because it seems like a waste of time right now. I expect better from Apple on this one. With all Apple devices I have and own I stick by that they are the best. But other manufacturers are catching up... Is it a matter of time. Simple things like that shouldn't be a problem, I would say!

  I would here similar problems or even a solution. Maybe I'm stupid here and there's something miss me in all this. ?

  One more thing... As I write this post I can choose my products of the list what I'm talking about. Yet once, disorder obsessive-compulsive and is up-to-date. My available product list me under here are about 2 years old! Sigh... What is with all this! Maybe someone taking care of everything that this must be a bit more OCD! I've 'none' will elect because my camera is not in my list below updated!

  Mac.

  If you save on iCloud for the first time, it may take some time until the data has been saved. Have you tried to connect to the adapter and the WiFi during the night?

  Looking iCloud/storage/management storage should also give you the backup size will be used the next time your phone is inactive, connected to Wi - Fi and.

• Unavailable backup server

  I'm restarting this topic.  I followed the direction to turn it off, wait, turn on and restart my Palm Pre Plus to launch the automatic backup, but were unsuccessful.  I keep getting the message "backup server unavailable."  Also, I have no list of previous backups, which leads me to believe that my data has never been backed up.

  I have a valid Palm profile because I can log into it, but whenever I try a manual backup, I get an error message 'server not available backup '.

  What is the step beyond to disable the backup, wait, restart, start, manual backup?

  Thanks in advance.

  I was going to just say that I see that you have done a backup today and check back with you to see if you still experience the problem.
  
  I will continue to investigate other issues of backup users.

• Time Capsule: No available backup drive

  I read a bunch of wires and nothing has worked.

  I have a MB Pro El Capitan 10.11.1, 2011 old version 2 TB TC running. I just moved and now have Fios new router/modem. Formerly Comcast.

  I plugged TC AC and ethernet to Fios. Got the green light. Open Airport utility. Clicked on change. Network (came into bridge mode). reset and renamed TC (as in troubleshooting, someone said to be renamed TC with new installation).

  I tried to make a Time Machine backup and get the message "backup drive is not available. I restarted. Nothing seems to work.

  Any ideas?

  Thank you very much

  We do not know this as you've read, or have tried, but if you have not already changed the settings in Time Machine preferences to indicate your Mac how to locate your Time Capsule on your 'new' network... now would be a good time to do that.

  Reason... If you have not done this... your Mac is still to try to locate the time Capsule using the path on your 'old' network... and your Time Capsule is now on another network 'new '. The Mac will never find that she can come back until he knows how to locate the Capsule of time on your network.

  Did you do that?  After the back if you are not sure.

• The backup disk has a corrupted file system (0 x 81000008)

  My computer has been implemented full backups per week on an external hard drive.  This week the back-up was not entirely successful.  When you click to view the details, I get the following error message - "backup has a corrupted file system.  "Fix it using the disk error checking tool or change backup settings to a different location.  I then click to start the disk check.  While the scan starts he gets only through files about 14000 and the dialog progress bar disappears completely, then the analysis stops.  I'm not sure a to how to solve the problem without deleting backups since I can't run the error-checking tool.  I know that I can reformat my drive external hard (according to the manufacturer's directions), but I'm not ready to lose all that data.

  Hi PAmom24kids,

  This is an external USB- drive that you use?

  First of all, you can check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Select also automatically fix file system errors

  Let us know if it works,

  Kind regards.

• Vista backup does not work

  When I try to use the backup, I get the message "backup stopped working, if a solution is found, you will be notified by Microsoft.

  Hello azshtr,

  You make a partial backup or a full backup? Your backup has already worked?
  If only making one partial, try a full backup to a different location and see if it ends.

  See the following for FAQ on using Windows Vista backup and restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Please try again and answer back with an updated status.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Backup Microsoft Windows has stopped working

  I use an external hard drive to back up my files. The old backup files have been removed. Now when I try to back up my files, I get the message to create a new full backup. When I go into the settings and try to create a new full backup I get the message "backup of microsoft windows has stopped working".

  The CheckDisk does not resolve the issue. However, I have solved my problem: create a new full backup on a disk separate trip then copied these files on my external hard drive, retried the backup by using the external hard drive and it succeeded. Everything should be OK now.