Video error - WMV-9 VCM RTW

Similar Questions

• Qosmio G10 - 100 video error

  My reports from G10 5mth old "video error - files neede to display video are not installed or not working not properly." Please restart Media Center and/or restart the computer.

  Follow the instructions makes no difference. Anyone know what I need to do? Thanks a lot in anticipation!

  Jon

  Hello

  Sorry, but it is not easy to say why this is happening because your explanation is not good enough. If you use the device without any problem and this message occurs only if you want to start some video files, it may be that this file is the reason for this problem.

  As Meier said try to reinstall the display driver.

  Good bye

• Media Center video error Qosmio G20

  Hi, I am unable to watch TV via Media Center. In the first when asking to watch live TV, I get ERROR VIDEO coming in the display window. I also get an error message stating: not found Tuner, the tuner is defective or not installed. Make sure that the tuner hardware and a valid tuner hardware driver is installed. I'm under V5.1.2715.2941 of MCE 2005 update rollup 2. As far as I know tuner and driver are installed and OK. Would appreciate any help you can offer. Thank you very much

  Post edited by: [email protected]_UK

  Hello

  I put t know if you have the video error or decoder, but please check this document http://support.toshiba-tro.de/kb0/TSB59015P0006R01.htm

  Maybe this will help.

  Good bye

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error stream TV to a Media Center extender (XBOX 360)

  Hello

  I have a PC that I use to record TV, which is accessible by several XBOX 360 through Media center.

  This configuration was working perfectly until a few days ago. At the same time, all 3 Xbox has ceased to be able to view the recorded TV programs, or view the Live TV feed. The Media center PC was the victim of a power cut at the time, but seems to work fine.

  1 TV live view on media Center PC (CMCP) - works correctly

  2. play Recorded TV on MCPC - works

  3. the screen live TV on xbox - video error

  4. play Recorded TV on xbox - video error

  5 video game file imported into Media center via Photos and video Media Center on the Xbox article - works

  6 connect the Xbox to another PC, which has also the Media Center on it and play recorded TV program - works

  So far I have tried:

  1 restart both MCPC and Xbox.

  2 remove the Media Center of the Xbox and reconnect to it.

  3. a new analysis of the signal to re - acquire all channels,

  4 using the Windows update to update the video card drivers.

  I am reasonably certain that the problem lies in the CMCP, but I'm not sure how to do this by how solve this problem. I have a large amount of data on the machine, so reinstalling is not really an option. AFAIK, new programs recording occurs correctly.

  All the drivers, applications, and the windows themselves are fully updated.   The error on the machine logs show no relevant error.  The operating system is Windows Vista Ultimate, 64-bit, service pack 2.  Here is a link to the power out of the msinfo32.exe execution on the server.

  Yes, it is possible to other files or even your user profile have been corrupted.
  Setting up a new user profile would exclude corruption in your existing username
  View profile.
   
   
  If the above fails, the a repair of the operating system installation should not disturb recorded
  TV.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• video error in media center, will not play videos or DVDs

  I cannot read the DVD, Live TV, or ripped movies in Media Center on my computer (64-bit) of W7. I just upgraded to W7 (64-bit). However, I can play all content in Media Player. I read somewhere that MC uses 64-bit and 32-bit codecs MP codecs. Can I register the 64-bit codec or fix them somehow without completely re - install W7?

  I found what was the cause of my video error message in MC. I had to disable the functions of exclusive Mode on the Advanced tab in the Audio properties for my audio device.

  1. right click on the speaker icon at the bottom right of the screen

  2. click on playback devices

  3. Select your audio device by clicking on it.

  4. click on properties, below on the right.

  5. Select the Advanced tab.

  6. the functions of exclusive Mode deselect the option and click on apply.

  Who did it for me. Everything works 100% now. Finally!

  Hope this helps you or someone else here with the same problem.

• How to remove the icon of the previous video file .wmv files in Media Player?

  I deleted my video file .wmv files, but they always appear as icons when opening Media Player.  I right click and choose 'Delete', but they are still left in the list.  Any suggestions?

  Library database could contribute to the WMP. Check out this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7/Windows-7-Windows-Media-Player-12-wont-update-the/e68d4e33-897C-421d-8D4B-dbf53c9ee4a5

• WMC on Xbox 360 shows "video error: the files needed to display video are not installed...»

  Front when you use Windows 7 Xbox 360 everything has worked well.
  Upgrade to windows 8.  WMC can play programs recorded on PC, but when I try to play recorded shows with WMC of XBox 360, I get the following message

  "Video error: files needed to display video are not installed or not working not properly." "Please restart Media Center and or restart the computer.

  I don't have any codecs installed
  I tried regedit change suggested that for vista, does not work
  I tried the deactivation/activation of WMC on the PC, does not work
  Restart the PC does not work
  Restarting everything doesn't work

  had this error the other day, that it drove me crazy. You know what fixed it? Disable my firewall. For some reason, he decided to start blocking my xbox. I hope this helps.

• Video error?

  I have what seems to be a video error problem. About six seconds evey screen "blinks." The color of the frame of a dialog box. or any input screen disappears for a second, and then the cycle continues for another six seconds etc. For the second one, no entry is possible. Very frustrating when you make the keyboard or mouse input with the missing letters etc. The pointer of the mouse or the cursor disappears for a second, resulting in permanently re-edition of e-mails, spreadsheets, mouse clicks and so on. If a drop down menu is open, it closes.

  This seemed to begin to follow the updating of Windows 8.

  How can this be repaired?

  Hi Michael,

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows-8/improve-PC-performance

  Good day!

  Yesterday, I was so frustrated that I decided that I would take action today. I have a continuous running a HARD drive backup external, so all data changes are immediately sent to the backup, but I decided to do a job of belt and Suspenders before today, recording all the 133 GB of my data files to another disk external DRIVE I have. My intention was to then run the Windows recovery program. Well when I checked on the progress it is 72% transferred and a message came that there was an interruption and the transfer had ceased. I checked on the point she had stopped and selected files remaining to be copied and then continues the transfer.

  Next time I checked on the progress, the screen saver is running, which had not happened since the problem started as each interrupt activity is considered, so don't start is not the screen saver. I took this as a good sign, but did not understand why he should be here. The next time I checked on the progress, the screen went sleep, that was another thing that I put to make but didn't, because, once more, the interruptions it wrong in thinking that there is activity.

  So, I checked by opening outlook and that is, without interruptions. I didn't bother to do the recovery program and I was able to type this without problem. It bothers me that I don't know what caused it to start and which caused her to stop, but for now, I'll accept that this is not now the case.

  Thank you for your response.

• For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project.

  For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project. Project automatically implemented by Adobe settings is 4K. Which the project settings to choose for a 2.7 K 25 fps?

  [title published by mod]

  Do not rely on such update. 2.7 K is not an ordinary resolution.

  You can import 2.7 K in ss14, you can't stabilize.

  First Pro CC 2015 to do this.

  But if 2.7 K files are introduced into a sequence of 1920 x 1080 you have the same problem, but this problem is corrected by nesting the images first.

• Problems with the video file (wmv) path - Director Keeps restoring old road

  I am looking for assistance in obtaining a video playing live per floor in my movie once it is burned to CD.

  What I found is this work expected to use a relative path , and my film must find the video files very well.  However, I have great difficulty with this.  I was able to change the 'filename' from the video cast member to a relative path (@Video\videofilename.wmv) and the property inspector reflect this change.

  

  However, once I save, publish and check that it works, the film begins to search for the file in the original location.  What happened several times.  I changed the properties for the Member of the cast in the cast, as well as for the onstage cast member (not sure if their properties are related, so after a few troubled results, I tried to change both).  Whatever happens, the path in the file name field is back:

  

  I've even went up to remove the videos of the scene and casting, then add them again, using only the relative path in the file name field, does not.  The result is always the same: once I have save and publish again, the name of the file back to the absolute path.  To say the least, it's frustrating.

  Thank you very much in advance for your help.

  B

  The operator 'path' should be considered as the combination of characters "@:" or "@------" or "@/ ', then your path should be"@\Video\videofilename.wmv ".

  As you say, this should not give problems. If it persists, there are two options. Use Manager prepareMovie for the searchPathList and set the member.filename property before than the dialog box 'where's... ' is displayed:

  on prepareMovie
    _player.searchPathList.append(_movie.path & "Video")
    -- member("wmv").filename = "@\Video\videofilename.wmv"
  end
  

• Video error setting DirectShow with Media Encoder

  I have a software named Swift with which I create subtitles for various clients.  I have a client, however, whose videos regularly give me an error message of the following type (when I try to load them): "impossible to define DirectShow Protocol."   My question is: can I use Media Encoder to export a version of the video that will not give me this error message?  So far, the answer appears to be 'no,' because I exported the original mov file as an avi and a mp4 and two videos gave me the same error message.  But there seems to be a lot of options in Media Encoder, I thought that perhaps a combination of these options can output a video that works in fact for me (who wouldn't give me a piece of error message "DirectShow" Protocol).

  Any ideas how (or if) I can use Media Encoder to create a version without video problems?

  ADDITIONAL INFORMATION: For some reason, the same Swift software on another computer usually seems to load the videos without problem.  I can't solve this because Swift is telling me that their product is not licensed for Windows 10, both of my computers using.

  I think I answered my own question.  I've exported the problem as a wmv file and that wmv seems to work very well.

  Brian

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Cannot read the video error code is 8007000E computer ran out of memory.

  OT: Media Player
  I recorded the video with lightwave usb webcam when I tried to read that I got the error message that my computer ran out of memory and so I should close other programs and try again. The error message given is C00D11C6 and gives as origional error code 8007000E

  You can help me solve the problem

  Joseph

  Hello

  1. don't you make changes to the computer before the show?
  2. do you have any third-party codecs installed on the computer?
  3. what operating system is installed on the computer?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library

  Method 2
  In the meantime, download and install MPEG-2 DVD decoders and check if that helps fix the problem:

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

• How to convert video in .wmv .mov video?

  How to convert files video my Kodak Playsport in .wmv .mov video so I can use Windows Media Player to send the videos clearly. I can send the videos in their current .mov format by using Microsoft Outlook, but they are practically not.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  First... the commercial full version of Apple Quicktime Pro
  has an option for conversion. MOV files to other formats.

  QuickTime 7 Pro
  http://www.Apple.com/QuickTime/extending/

  Converters more...

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7) (turn)

  (3) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...