Video error?

Similar Questions

• Qosmio G10 - 100 video error

  My reports from G10 5mth old "video error - files neede to display video are not installed or not working not properly." Please restart Media Center and/or restart the computer.

  Follow the instructions makes no difference. Anyone know what I need to do? Thanks a lot in anticipation!

  Jon

  Hello

  Sorry, but it is not easy to say why this is happening because your explanation is not good enough. If you use the device without any problem and this message occurs only if you want to start some video files, it may be that this file is the reason for this problem.

  As Meier said try to reinstall the display driver.

  Good bye

• Media Center video error Qosmio G20

  Hi, I am unable to watch TV via Media Center. In the first when asking to watch live TV, I get ERROR VIDEO coming in the display window. I also get an error message stating: not found Tuner, the tuner is defective or not installed. Make sure that the tuner hardware and a valid tuner hardware driver is installed. I'm under V5.1.2715.2941 of MCE 2005 update rollup 2. As far as I know tuner and driver are installed and OK. Would appreciate any help you can offer. Thank you very much

  Post edited by: [email protected]_UK

  Hello

  I put t know if you have the video error or decoder, but please check this document http://support.toshiba-tro.de/kb0/TSB59015P0006R01.htm

  Maybe this will help.

  Good bye

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error stream TV to a Media Center extender (XBOX 360)

  Hello

  I have a PC that I use to record TV, which is accessible by several XBOX 360 through Media center.

  This configuration was working perfectly until a few days ago. At the same time, all 3 Xbox has ceased to be able to view the recorded TV programs, or view the Live TV feed. The Media center PC was the victim of a power cut at the time, but seems to work fine.

  1 TV live view on media Center PC (CMCP) - works correctly

  2. play Recorded TV on MCPC - works

  3. the screen live TV on xbox - video error

  4. play Recorded TV on xbox - video error

  5 video game file imported into Media center via Photos and video Media Center on the Xbox article - works

  6 connect the Xbox to another PC, which has also the Media Center on it and play recorded TV program - works

  So far I have tried:

  1 restart both MCPC and Xbox.

  2 remove the Media Center of the Xbox and reconnect to it.

  3. a new analysis of the signal to re - acquire all channels,

  4 using the Windows update to update the video card drivers.

  I am reasonably certain that the problem lies in the CMCP, but I'm not sure how to do this by how solve this problem. I have a large amount of data on the machine, so reinstalling is not really an option. AFAIK, new programs recording occurs correctly.

  All the drivers, applications, and the windows themselves are fully updated.   The error on the machine logs show no relevant error.  The operating system is Windows Vista Ultimate, 64-bit, service pack 2.  Here is a link to the power out of the msinfo32.exe execution on the server.

  Yes, it is possible to other files or even your user profile have been corrupted.
  Setting up a new user profile would exclude corruption in your existing username
  View profile.
   
   
  If the above fails, the a repair of the operating system installation should not disturb recorded
  TV.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• video error in media center, will not play videos or DVDs

  I cannot read the DVD, Live TV, or ripped movies in Media Center on my computer (64-bit) of W7. I just upgraded to W7 (64-bit). However, I can play all content in Media Player. I read somewhere that MC uses 64-bit and 32-bit codecs MP codecs. Can I register the 64-bit codec or fix them somehow without completely re - install W7?

  I found what was the cause of my video error message in MC. I had to disable the functions of exclusive Mode on the Advanced tab in the Audio properties for my audio device.

  1. right click on the speaker icon at the bottom right of the screen

  2. click on playback devices

  3. Select your audio device by clicking on it.

  4. click on properties, below on the right.

  5. Select the Advanced tab.

  6. the functions of exclusive Mode deselect the option and click on apply.

  Who did it for me. Everything works 100% now. Finally!

  Hope this helps you or someone else here with the same problem.

• WMC on Xbox 360 shows "video error: the files needed to display video are not installed...»

  Front when you use Windows 7 Xbox 360 everything has worked well.
  Upgrade to windows 8.  WMC can play programs recorded on PC, but when I try to play recorded shows with WMC of XBox 360, I get the following message

  "Video error: files needed to display video are not installed or not working not properly." "Please restart Media Center and or restart the computer.

  I don't have any codecs installed
  I tried regedit change suggested that for vista, does not work
  I tried the deactivation/activation of WMC on the PC, does not work
  Restart the PC does not work
  Restarting everything doesn't work

  had this error the other day, that it drove me crazy. You know what fixed it? Disable my firewall. For some reason, he decided to start blocking my xbox. I hope this helps.

• For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project.

  For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project. Project automatically implemented by Adobe settings is 4K. Which the project settings to choose for a 2.7 K 25 fps?

  [title published by mod]

  Do not rely on such update. 2.7 K is not an ordinary resolution.

  You can import 2.7 K in ss14, you can't stabilize.

  First Pro CC 2015 to do this.

  But if 2.7 K files are introduced into a sequence of 1920 x 1080 you have the same problem, but this problem is corrected by nesting the images first.

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Cannot read the video error code is 8007000E computer ran out of memory.

  OT: Media Player
  I recorded the video with lightwave usb webcam when I tried to read that I got the error message that my computer ran out of memory and so I should close other programs and try again. The error message given is C00D11C6 and gives as origional error code 8007000E

  You can help me solve the problem

  Joseph

  Hello

  1. don't you make changes to the computer before the show?
  2. do you have any third-party codecs installed on the computer?
  3. what operating system is installed on the computer?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library

  Method 2
  In the meantime, download and install MPEG-2 DVD decoders and check if that helps fix the problem:

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video error - files needed to display video are not installed or not working not properly. Please restart Windows Media Center or restart the computer

  I have Vista Version 6.0.6002.18030 (vistasp2_gdr.090429 - 2357) SP2 installed during an automatic update.  This box is only used as a Media Center

  Now, I get this error when you try to watch HD programming - I get a few seconds of viewing before the image starts to freeze, the acoustic breaks then the error message.
  Recorded at stations SD I will often get towards the end of the program, and it starts too break up.
  The Analysis ToolPak that I found for the Hauppauge 500 t tuner I have reports that all networks have 70 + strength and 100% quality.
  The performance of the Task Manager tab indicates the processor cores ares works at about 25% of capacity
  I had a lot of trouble getting the Pioneer BD drive to work - it turned out to be a very minor mistake, a slider maxed out on the Graphics tab "overlay" card - but until I found this he encouraged to re - install the OS from the original DVD and the problem persists.
  The system used to work properly and there has been no hardware apart from the Pioneer BD drive changes.
  I got ffdshow installed from the beginning, so I don't think that's the problem.

  DVD read OK

  BluRay disks play back ok using the Cyberlink plug in BOF VMC

  Different types of downloaded files play OK using VLC.  So, I conclude that the (integrated) graphics (latest drivers installed) and in the rest of the material are very good.

  Looking through the forums, this seems to be an old problem, but its very curent FRO me and SUPER frustrating.

  The indices of anyone?

  Hello Clement,

  Thanks much for the reply.
  I had already downloaded the Tuner card driver on the site yesterday and installed (this is the same version I already had, but he did not seem wrong to re - install).  No change.
  I really don't understand well enough codecs!  -are you making allusion to the East no doubt not that the encoding of the input signal software cannot do its job properly?  Are the part of the tuner driver codecs? I could not see them on the website of the tuner (http://www.newmagic.com.au/Support/Hauppauge_Vista_Drivers.html)
  Can you please point me in the right direction for the codec pack (btw, I though 'codec packs' were notoriously bad news! and since I recently made a new facility would be not all right codecs be there that they must have been before when everything worked well?)
  I have a chart integrated 'card' on the ASUS P5E - VM HDMI, an Intel GMA x 3500 and here too I have the latest driver from the Intel web site.
  I think I've found the "MS decoder checkup" utility you mention (http://www.microsoft.com/downloads/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D-627E6ADE9FCB&displaylang=en).  I have a Red Cross and green ticks for different decoders but 'Microsoft MPEG-2 Video' (msmpeg2vdec.dll.) decoder is compatible with MCE, but not with MP10.  When selected "update now" button is dimmed.
  Thanks again

• can not play at char in line 2 for the video error message 5773 code 0

  Hi, whenever I try to play video on www.cbc.ca the Player opens but the video does not start.  bottom left, there is a java script error which reads:

  Line 2

  char 5773

  error: access denied

  code 0

  URL: http://www.cbc.ca/video

  If anyone knows how I can fix this I would be very happy.  Thank you

  Hi, thanks.  I use internet explore.   I downloaded firefox to see if another browser might change things, but he did not.  until I received this answer, I found a site that has detected that I had an old version of java that can interfere with the new version then I uninstalled the old version and restarted my browser and now the video on the site seems to work!  If he gives me again, I'll try your suggestions. It's probably a good idea to optimize internet Explorer anyway.

  Thank you

• Windows media player 11 on downloaded videos error "cannot read drive file does not support the file type or does not take in charge the codec used to compress the file.

  • now that the full version of k'lite seems to stop what is happening why hasent windows incorporated something similar in the windows media player 11, or they have another type of codec full, we can use to make this.only so many people have the same problem .please can help you.

  Hi bbdunford,

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

   

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Method 1

  Check if the video file format is supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  Method 2

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 8 hardware windows BSOD error video error BCCode: 141.

  Original title: Video hardware error windows 8.

  Hi I recently saw this as i much as I remember that I don't have an error freezes or BSOD

  I have a graphics update

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.2.9200.2.0.0.768.100
  Locale ID: 1033

  Files helping to describe the problem
  WD-20140425 - 0213.dmp
  SysData. XML
  WERInternalMetadata.xml

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 141
  BCP1: FFFFFA8005E71010
  BCP2: FFFFF8800609828C
  BCP3: 0000000000000000
  BCP4: 0000000000000D 60
  OS version: 6_2_9200
  Service Pack: 0_0
  Product: 768_1

  You have to wait the next system crash.

  Kind regards

  Patrick