Video loop and the auto play via HTML

Similar Questions

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options

  With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options are there in the video tutorial. But they just do not appear in my software.

  Which version of CC do you use? Numbers, please! And your BONES... and I think you're looking in all the wrong places.

  The CC2015 ranges are found on a "Lumetri Scopes" tab in the top left panel so the color workspace and the central panel Lumetri Scopes tab in the workspace of the effects.

  

  Looks like you're clicking in the program monitor, but this is not where the scopes...

  Neil

• Unable to read video files and music. Playing sound scrambled and broken up.

  Where play music or watch videos audio seems to buffer? and make a noise as a short roll. Any ideas please.

  Original title: is my broken audio player?

  Hi x20spec,

  If you're still having problems with the sound of your video files and music, follow the troubleshooting steps in this document to resolve its current problems. The document is written for Windows Vista, but should also be useful in Windows 7.

  Let us know if it works.

• DVD player falls down after that each fix and the film played

  Error display says decoder need and the file cannot be found / this problem is not repairable

  Hi J.G. Sanchez,.
   
  -What is the brand and model of your DVD player?
  -What's the fix you're talking about?
  -What, exactly, is a transcript of the error message that you receive?
   

  A DVD decoder is another name for a MPEG-2 decoder. The content on DVD-Video discs is encoded in MPEG-2 format, as is the content of the files DVR - MS (Microsoft recorded TV Shows) and some AVI files. To read these articles in the drive, you need a compatible DVD decoder installed on your computer.

  If your computer has a DVD drive, it probably already has a DVD decoder installed on it. However, if you encounter an error message that indicates that you are missing a compatible DVD decoder, click Web help on the error message dialog box to determine how to obtain one.

  Step 1: If you are not sure which decoder is installed on your computer, install the Windows XP DVD Decoder Checkup Utility from the link given below. You can use this utility to:

  • Identify the MPEG-2 decoders that are installed on your computer.
  • Determine whether the decoders are compatible with Windows Media Player 10.
  • Choose which installed decoder you want Windows Media Player 10 to use when synchronizing DVR - MS files to a mobile device.

  To check if the decoder is present on your computer, see:

  Windows XP Video Decoder Checkup Utility

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D-627E6ADE9FCB&displaylang=en

  Step 2: In some cases, the utility offers a Web site where an updated decoder might be available.

  If the program indicates that you do not have a MPEG-2 decoder installed, consider purchasing one.

  You can download the DVD decoder from the link below:

  Plug-ins for Windows Media Player

• video card and the black screen problems.

  Hello world! My desk top compaq presario sr1411nx don't seem to support a video card, I've recently tried

  to install. I put the card in one of the three open slots connected to the motherboard, and it seems to fit very well.

  The operating system I have is a Microsoft Windows XP Edition family version 2002 service pack 3, Celeron (R) CPU 2.80 ghz, 248 MB of ram.

  The graphics card is an ATI Radeon X1300PCI 256 MB. After I installed the card the following continues to happen.

  I turn the hard drive and follow on. The windows start menu back to the top.

  A message box appears telling me to close all programs. Restart the computer if the installation of the video card

  can be updated and completed.

  I then, restart the computer. After that I'm doing it just a black screen and white pointer popup. As I move the mouse

  There is no beep sounds. Browser menu and start the internet windows does not load upward.

  I then remove the video card and restart the computer and everything works fine.

  Question: What could be the cause, and I can fix it?

  Thank you

  Frogman

  Try to go into the cmos setup in the bios and see if there is any option to disable the onboard video as memory goes against zero or as allowing the pci. If not try to change the graphics card to the other pci slot

• How can I disable the 'auto play' settings on my laptop built in SD card reader? I use Windows XP and it is a DELL INSPIRON 9400 laptop

  When I use a card reader external to see pictures on a CF card is not a problem, it gives me options to choose what need do is what I want my internal card reader to do, any help, advice or solutions would be very welcome for all your technicians over there.

  Follow the procedure described in the following article:

  "How to disable the Windows Autorun feature"
    <>http://support.Microsoft.com/kb/967715 >

  There is a section in this article "How to selectively disable specific Autorun features", but you can disable it only based on the "Type" of the player.  What you can find, is that your CF card reader goes up as a 'removable disc' then your SD reader rises up like a 'fixed reader' (or vice versa) and it is the determining factor on the behavior that you get.

  HTH,
  JW

• Problems with audio/video playback and the Source window

  I have some videos that I try to import into my sequence. Whenever I have open the video in my source window (or drag it to the timeline), the sound goes crazy. He starts to jump and identified himself. When I open the movie file in Quicktime format on my computer, it opens and plays very well. In addition, I don't know if it is not connected, but sometimes, when I open a video in the window of my Source, there is no audio. I can drag to the sequence and double-click on it to put the video of the sequence in the Source window and it plays very well.

  The video that I have problems with is a .mov, filmed from an iPad (not sure what model of iPad). It is filmed in Portrait mode, do not know if it matters. Please let me know what other information would be necessary to solve this problem.

  
  Thank you!

  First, answer the questions in the FAQ of Information http://forums.adobe.com/message/4200840

  Second, it IS possible whether the ipad video like video iphone

  IPhone will not edit easily because it uses a variable rate

  -A fix in the #22 http://forums.adobe.com/thread/934466 message

• Import FLV video in to the Stop/Play Flash

  I have an imported video flv in towards a page flash8 and want to get the video stop loading?

  When importing the video there are no other choice including skinning buttons play/stop/pause etc. but no option to stop video on laundry!

  Is this possible with the code autoscript and if yes could anyone let me have the code I need to use!

  Thank you

  Assign your component an instance name (for example, flv) and use:

  flv.autoPlay = false;

  (this can also be set in the component settings panel.)

• While the loop and the passage of a string to a Subvi problem

  Hello world

  My problem is this: I have a MainVI and a Subvi, the MainVI is running a while loop in which the Subvi is called and goes to 2 parameters, 1 bool and 1 chain. the problem is, inside the Subvi the chain should be placed in a text box so that the user can see before pressing ok.

  Background of the present: normally "Get_DMC.vi" opens with just the text box and a button cancel, means to scan 10 characters of big entry. It still works fine. If the user selects the DMC model in the MainVI, it should only copy the dummy DMC of the MainVI (the above string) to the show, and Subvi in the text box as well as allow another button 'OK' for the opportunity to control themselves (Advanced) users.

  The Subvi is reloaded on every call because he'd be stuck in the while loop, I had not done that. Not quite sure why, if someone has an answer to that aswell please tell me.

  Many thanks in advance,

  Kind regards

  Pedro

  It might be that the writing of the DMC to "Value DMC" model that happens before the "reset DMC by default".  Try the error off DMC Reint default wiring to the value DMC error to force the order of execution

  Ken

• How do I stop the auto play music when you open media player

  When I opened my music from Media Player automatically starts playing and I do not know how to stop

  Hello

  (1) have you made changes before the start of this issue?

  (2) what version of Windows Media Player do you use?

  (3) is the specific question of particular songs?

  How to determine the version of Windows Media Player

  http://support.Microsoft.com/kb/190990

  Please update the computer by using windows update and check if it solves the problem.

  Let us know the results.

• User does not appear in the XP start window after installing new video card and the extra memory. This option is to turn off count... safe mode does not help.

  Additional memory added, installed the new video card...
  Reboot a windows XP user name screen. any user identified.

  Can you achieve Alt + Ctrl + delete twice and connect with the classic login?

  -JW

• I stop the video preview and the image get distorted.

  Hey guys,.

  I've updated my mac to the new version and I made sure to update first pro version more. Since I did that whenever I stop my video on the timeline image on my canvas comes totally distorted that to the point that it is impossible to do any color correction to my project.

  I would be really appreciated all the help I can get to solve problems of this

  Thank you

  
  

  Daniel

  I actually found this fix in another forum

  File-> the project settings of-> General

  Change the rendering/reading Mercury engine software... it seems to fix it.

  Make sure you keep the preview files

• Help with loops and the fi

  Hi, im quite new to action scripts but the use of pascal a lot. Im stuck with a loop. What I want to happen, is when it gets to a certain range, not stop there and do some things visible on the frame when I press the specific letters on my keyboard. I had:

  Stop();
  {if (Key.isDown (85))}
  Statements
  }

  but I found that it would apply only if I held the button when I walked into the frame.
  I did try using some different loops, but in vain
  any suggestions would help!
  Alex

  Try to use a listener...

  var keyListener:Object = new Object();
  Key.addListener (keyListener);

  function keyDownF() {}
  If (Key.GetCode () == 85) {}
  Statements

  }
  }

  keyListener.onKeyDown = keyDownF;

• Compatible video card and the motherboard

  Hi all

  I have a HP Pavilion Elite HPE-321i and I would replace my GeForce GT 320 with a GeForce GTX 650.

  I saw that it requires a PCI-E 3.0... is it compatible with my motherboard which is a MS-7613 (Iona-GL8E) with 1 PCI Express x 16 slot?

  Thanks a lot for your help

  André

  Chipset Intel H57 of your computer should be compatible PCIe 2.0 review. Most revision 3.0 PCIe graphics cards should be compatible with your computer. The GTX650 should be fine, but the 700 series may have problems.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation