Video PC Spec - your help / advice / opinion please

Similar Questions

• Installation of the Complutense University of MADRID - need your help very badly - please help

  omg!!!!!!!!!!!!!! I had a moment difficult installing oracle UCM in my system...
  I managed to get the homepage but wen I click on a link, it says
  
  "The/idc3/idcplg requested URL was not found on this server."
  
  My induction is that iam not configure my cgi properly Setup in apache...
  
  Here are the necessary info:
  
  OS: WIndows 7
  Web server: apache 2.2
  
  Please find my file config apache below: (httd.conf)
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot value "(x 86) C:/Program Files/Apache Software Foundation/Apache2.» 2' will be interpreted by the
  # Server as "(x 86) C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.» 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen to 90
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin [email protected]
  
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName bhuramish - HP.vc.shawcable .net: 80
  
  #
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  #DocumentRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs.
  DocumentRoot "C:/Oracle/ucm/server3/weblayout.
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  # < directory "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs" >
  < directory "C:/Oracle/ucm/server3/weblayout" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule /idc3 >
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http://bhuramish-HP.vc.shawcable.net/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  LoadModule IdcApacheAuth C:/Oracle/ucm/server3/shared/os/win32/lib/IdcApache22Auth.dll
  IdcUserDB idc 'C:/Oracle/ucm/server3/data/users/userdb.txt '.
  Alias /idc3 C:/Oracle/ucm/server3/weblayout
  < /idc3 location >
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / location >
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias /idcplg/ "C:/Oracle/ucm/server3/weblayout / '.
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:\Oracle\ucm\server3\weblayout" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 http://bhuramish-HP.VC.shawcable.NET/subscription_info.html
  #
  
  #
  # MaxRanges: Number of channels in a Maximum request before
  # return the resource, or 0 for unlimited
  # Default is to accept 200 lines
  #MaxRanges 0
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  My CONFIG.cfg file:
  
  <? jcharset cfg = "UTF8"? >
  Server #Content System Properties
  IDC_Name = idc3
  IdcProductName = idccs
  SystemLocale = English-United States
  InstanceMenuLabel = idc3
  InstanceDescription = idc3 content server
  SocketHostAddressSecurityFilter = 127.0.0.1
  
  Variable #Database
  IsJdbc = true
  JdbcDriver = net .sourceforge .jtds .jdbc .driver
  JdbcConnectionString = jdbc:jtds:sqlserver://bhuramish-HP:1433 / OracleECM
  JdbcUser = ecm
  JdbcPassword = VZU64a2zvfxn4H/vxFslVk0wdHELfmeJ4z + xMB5g4Rw =
  JdbcPasswordEncoding = Intradoc
  
  Variable #Internet
  HttpServerAddress = bhuramish - HP: 90
  Mail = mail server
  SysAdminAddress=sysadmin@mail
  HttpRelativeWebRoot = / idc3.
  CgiFileName = idcplg
  UseSSL =
  WebProxyAdminServer = true
  
  #General option Variables
  
  Variable #Additional
  DatabaseType = mssql
  JAVA_CLASSPATH_customjdbc=$SharedDir/classes/jTDS-1.2.4.jar
  SearchIndexerEngineName = DATABASE. METADATA
  Server web apache =
  IdcAdminServerPort = 2220
  IntradocServerPort = 2222
  
  Please help me on this... I worked in stellent IBPM 7.6 sp2 in a large cpompany and never had the opportunity to work on Setup frm scrach...
  
  See you soon
  Vivek
  
  Published by: 887781 on September 27, 2011 19:10

  Hello

  instance of #ucm10g

  LoadModule IdcApacheAuth IdcApache22Auth.dll
  Idc3 IdcUserDB '/data/users/userdb.txt '.

  /Idc3 alias "/weblayout".
  
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  

  This is how apache entries must be.

  Make the changes as above, and then restart Apache, Complutense University of Madrid.

  Test to see if the problem still persists.

  Thank you
  Srinath

• Can your help me? Please

  Do your people speaking Chinese? My English is bad very terrible

  JJust Chinese writing here, someone may be able to help.  Apply also to the

  https://discussionschinese.Apple.com/

• I can't seem to install indesign, get me the following message: no application is configured pour open URL, what to do? Thank you pour your help!

  I can't seem to install indesign, get me the following message: "no application is configured to open URL", what to do? Thank you pour your help!

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Your help please

  I am Sherly. I bought my 5s of the Iphone to Canada in April 2016. When I return to Haiti, I lost my cell phone and I need your help please help me locate it. Pleaseeee help me. I can't believe I'm losing my cell phone. Thank you so much.

  No one here, or Apple can help you to locate your phone. If you had enabled find my iPhone before the disaster, you can connect to iCloud.com and attempt to follow the device. It is the only way to follow. Apple does not locate devices. See this document to support for more tips. If your iPhone, iPad or iPod touch is lost or stolen - Apple Support

• yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

  Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon.

• buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

  buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

  No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

• Please I need your help in the next issue.

  Please I need your help in the next issue.

  I'm trying to change a driver of function generator to perform the following operations:

  starting with the initial value (for example 1 MHz) for some time (for example 10 sec.) and turn off the output for another time (e.g. 20 seconds) and then start again but this time with the frequency increment value (for example 1 MHz + 0.1 x n MHz = 1.1 MHz for n = 1, 2, 3,... n).

  The function generator model is ag33xxxGPIB and the link of the driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9066659CE034080020E748...

  There is no modifications are required for the driver, although there might be an example that you can edit. You use the function of the frequency set in a loop with a shift register. Initialize the registry to offset with the frequency of your departure and each iteration of the loop, add the value of the step. Exit the loop when the stop frequency is reached. Try to write something and after back if you have any problems. Fix what you wrote.

  It's pretty basic LabVIEW code. Did you do the online tutorials?

• I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Hello Sir,

  I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Thank you

  Alex

  You can download the software here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435683&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3435682&TaskID=135

• I was offered an update for Windows Net Framework since October 16 2010.It refused to download, but has reappeared more than 80 times since. He refuses to download. Your help please Greg

  I asked Windows Help and support on how this should be resolved. I got to hide? Unfortunately I do not have

  Know how to do this. If you can not help me with the update, can help you with the alternative?

  I was offered an update for Windows Net Framework since October 16 2010.It refused to download, but has reappeared more than 80 times since. He refuses to download. Your help please Greg

  Yours Sincerely Greg Nicholas * address email is removed from the privacy *.

  Off, this thread shows first the operating system installed on your Windows Vista computer when, through the updates that were offered, it is in fact Windows 7.

  All installed updates are listed in Control Panel > programs > programs and features > view installed updates

  Repair of all .NET Framework you have installed should be possible from programs and features.
  There are .NET Frameworks that are already present in Windows 7.
  - What version of the .NET Framework is included in which version of the OS?

  "Windows 7 (all editions) includes the .NET Framework 3.5.1 as a component of the operating system.  This means that you will get the .NET Framework 2.0 SP2, 3.0 SP2 and 3.5 SP1 and 3.5 SP1 post bugs corrections.  3.0 SP2 and 3.5 SP1 can be added or removed via the Control Panel programs and features. "

  The only one updated security .NET Framework, which was released in October 2010
  Security bulletin Microsoft MS10-077 - critical
  A vulnerability in the .NET Framework could enable Code execution (2160841) remote
  designed for the .NET Framework 4. The said framework is not a component of Windows 7 and must be installed by a user or a program that imposes so that the software to run.

  If you can not locate any .NET Frameworks that you or some software aiinstalle in programs and features, please run the for the .NET Framework cleanup tool to remove them. The tool will not remove .NET Frameworks that are a component (provided with) Windows 7.

  The history of the update is visible from Windows Update > view update history

  Please see if you can manually install KB2467023 by downloading and saving the link in this article:

  An update that resolves issues that occur when ExΘcutables systΦme are unloaded and loaded in Windows 7 and Windows Server 2008 R2 is available
  Don't forget to click on the link for
  Update for Windows 7 for x 64-based systems (KB2467023)

  Once the download completes close all programs and browsers, then try to manually install Windows6. 1 KB2467023-x 64.msu.
  Restart the system, if requested.

  Who has installed KB2467023?

• I NEED YOUR HELP PLEASE! GOT 4540 s computer laptop HP ProBook. l + windows 7-pro, I am burning MUSIC ON DISK A C. Dr. OF WINDOWS MEDIA PLAYER,"+

  REPEATED YEAR ERROR A RED X and pointing to the prob-the source is when I played ' cv.d. + when I chose to open dectsron files wth either W "S MEDIAM PLAYER, INTERNET EXPLORER, or WITH A DIFFERENT PLAYER 'CLASSIC', I THINK! "SO, WHEN THE ASSISTANCE OF W / CLICKING ON. MEDIA PLAYER "-AN ERROR REPEATEA"
  DLY? -J' USES THE LATEST VERSION OF MOZILLA FIREFOX as MY WEB BROWSER... LALSO WHEN IVE DOWNLOADED MUSIC FROM 'YOUTUBE' IN YO A PLAYLIST IN THE LIBRARY, TURN OFF LAPTOP + BACK TO FINISH BUT 'PROPERTIES' ALONG ALL THE TRACKS DISAPPEARED + ' WAS A 'WASTE OF TIME "!" YES A GOOD PER. S WIDE, DO YOU KNOW WHAT I HAVE WAY? ISN'T ENOUGH HOURS WITHOUT THIS "APPENING"! ". ANY ONE OUT THERE WHO THINKS THEY CAN AVE a CE would BE "APPRECIATED:, WITHOUT END, I look FORWARD WITH HOPE, Justin,

  Hello Justin,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the exact error message when you say: "YEAR ERROR REPEATEADLY?

  Thank you for details on the issue.

  This problem may occur because of the incorrect or damaged Windows media player settings.

  I suggest you run Windows media player convenience store settings and check.
  Reference:
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  This utility checks the configuration and network for Windows Media Player settings to make sure you can read the content that you have downloaded and saved on your computer, or content streaming over a network or the

  Internet.

  Please also read this article and check.
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/burn-CD-DVD-Media-Player#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Can someone tell me please how to fix programs icon who turned into VLC player? I really need your help guys as soon as possible...

  

  Can someone tell me please how to fix programs icon who turned into VLC player? I really need your help guys as soon as possible...

  From what you have stated above, I think that the file association for LNK files has been given misdirection to the VLC Player. I've seen this happen when opening a program via a shortcut (for example. LNK file), you are asked what type of program to open it with. After selecting the VLC Player (or another program) via the Select a program from a list of programs installedand check always use the selected program to open this type of file (circled in red below), the document or program referenced by the shortcut of origin opens in VLC Player as it should.

  

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the browser will want to be opened by VLC Player and VLC Player icon to view the shortcut no matter what shortcut was originally intentioned to open. This is known as a file association and the default icon. The same condition can occur if you have performed these actions 'Open with' on one. JPG or even a. EXE, but the. LNK explanation is much more likely for the items on the desktop.

  The good news is that a small free utility was written to cancel the. LNK file association was created. There is also a registry hack to achieve, but I recommend the utility unAssoc for its ease of use. I used to send people on another site to download this utility, but this site has become confused with all the ads and fake download links. I put a copy on own OneDrive here.

  

  Just download, then use the utility to unassociate the. LNK files for the user or globally delete the file type and let windows rebuild a new default.

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.

  LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.

  What version of OS are you using? If you run El Capitan, he won't work except in the latest LR6 and CC. Libraries attach Nikon used until 2015.3 or 6.3 LR LR 5 and LR CC are incompatible with El capitan. Nikon has recently updated libraries and those that are now used in the latest versions of LR.

• Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people

  Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.

  can anyone in the customer support to disable this?

  Hello Terry,

  I checked the serial number and found that you have enough number of activations left to install on 2 computers.

  Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.

  My direct email: [email protected]

  Chat Support email:

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Kind regards

  Rave