video quality goes bad after adding an effect first pro 6! Help, please?

Similar Questions

• Screen goes black after the screen "Welcome"... Help, please.

  My laptop is a Pavilion Dv6-6118nr.

  Whenever I start my laptop itll seem like if its normal startup, then the home screen it's just becomes completely black when it should now display my desktop. With it being bllack, I can still see my cursor, but it is not Flash or anything. I performed some diagnostic tests and even restored back to an early date to see if itd work. Any previous question I have ever encountered with my computer laptop ive always fixed, but this one has really left me speechless. The only reason imon internet is now because I started it in safe mode with network. I know that this has nothing to do wiith my screen or LED bc im of course using the internet today.

  P.S My battery is messed up so that it displays a message when I start that ive been aware of & get a new one this week. Sometimes when the battery becomes hot, I'm going out while that its plugged in until it cools. I don't know if this is a problem that is frequent or not w HP its but if someone saw as what it probably could be, very forced itd. Thanks in advance.

  * Windows 7 64 bit

  * HP Pavilion Dv6-6118nr

  *

  As your screen works in safe mode it tells me this is a diplay setting that is conflicting with the hardware.

  Start in safe mode and do a right-click on computer and select manage.

  Invite through permissions. Once the loads from the console:

  Now, in the left pane, click Device Manager.

  Find the setting for the graphics card.

  Right-click on your graphics card and select uninstall device.

  Restart machine and Windows will reinstall your graphics card with the default settings.

  You may need to adjust your resolution to your tastes.

  Then try to find out what kind of program has caused the problem initially.

  Hope this helps you.

• Why media is pending after adding an effect?

  My computer has been upgraded specifically because the higher range vid cards are supposed to make on-the-fly with premiere pro, and not no matter what media were sitting there with the red bar.  It is therefore very puzzled when, after spending $ 2,000 on a new machine that I can just edit and see the changes.

  My machine:

  Intel Core i7-2600 @3. 4 ghz

  32 GB of ram

  2 TB hard drive

  ASUS GTX 770

  What I'm working with:

  4 clips of a gopro hero3, all of the ins and outs, resolution 1080, the total sequence time: 16 s

  I'm trying filters on the first clip to see what it looks like - antialias, Auto color, auto levels, contrast automatic lighting effects.

  After adding the effect to the clip, he gets the red bar above. I press on enter to render, and it does. After you have made (3 seconds), then it goes to the media in anticipation of the screen with a green bar above. It plays audio but no video.

  I waited 25 minutes to see if he just needs to catch up, still nothing.

  the first closing and reopening seemed to make all the problems disappear, bizarre.

• First pro cc help me to watch the video in full screen

  Hello

  I have a problem to view a video preview in full screen

  I installed first pro cc under w8.1 pro 64-bit

  and I installed the English version to better follow lynda or other video tutorials

  
  

  but my keyboard is not English, and I don't have the key ' (I guess the name is the title"
  

  
  

  cs6 and cc was introduced the shortcut ' and ctrl +'

  
  

  j’ai an Italian keyboard, how can I do?

  can I change this shortcut?

  
  

  Thank you!

  any help will be appreciated top!

  Yes. Edition > keyboard shortcuts.

  In English, the keyboard shortcut is called toggle full screen. If you have problems it is, just try typing "in the search box.

• Video quality not good after installing Windows 7

  Original title: videos have lost quality, sometimes plays like 240 p.; videos bluray 720 p does not play smoothly

  I performed a custom installation of windows 7 ultimate (64 bit) of windows xp professional(32bit). Win7 worked well, but when I played a video file, which played very well under xp smoothly with good quality, it is int playing well as it was in xp. some videos that were 720 p bluray (brrip) files do not play smoothly. I also noticed that microsoft had provided me with a graphics card that was previously matrox millineum g series under xp. Sound, video, game controllers also changed the device to microsoft. If a total of 143 recommended updates were automatically installed and verified by windows, I have the problem again. Should I have to install win xp or should I update my graphics device? My custom pricing windows is 1.0.In win 7, internet, videos play very smoothly. Should I try to win7(64bit) to win7(32bit). Thanks for the help.

  Hi Vincent,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that the video quality is not good after the installation of Windows 7.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  What is the number and the model of the computer?

  This problem can occur for the following reasons, the monitor you use and its settings, Windows is configured and discover how you use your computer can all have an effect on display quality.

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Open the troubleshooter of display quality
  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:
  If the problem persists, I suggest you to install the latest graphics driver on the manufacturer's Web site.

  Check out the link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Ways to improve display quality
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• End of Cup Video Clip off the power when send you first Pro CC 2014 to effects after 2014 CC and I slowed down with Timewarp?

  When I send a clip from Premiere Pro CC 2014 to after effects CC 2014 and I slowed down with Time warp the clip cut of 75% at the end of the video and display only the first 25% slow.  How can I fix this and how I round it travels in first pro to play the FULL slow motion video clip?

  Try adding effect temporal Deformation on an adjustment layer in AFX, rather than on the video it self.

• Help, please! Video type MTS have no audio after having imported the first Pro CS6

  The MTS files are used by SONY, Canon and Panosonic camcorders to store HD videos encoded with AVCHD.

  I can play these videos using Windows Media Player and the sound works fine. They also work in Windows Movie Maker. Why they do not work in first Pro CS6?

  As I went through this forum, it seems that I need to downgrade to CS5.5?

  After reading the forums, I found a very easy solution! And I don't take any credit for it.

  Download the software and convert AVCHD to WMV files without loss! Phew!

  http://www.shedworx.com/voltaichd

• BlackBerry Smartphones can not play youtube video with the 3G network, but works with WiFi, why? Help, please!

  Hello

  I tried several times to read the youtube videos with network wifi and it works fine, but when I use the 3G or GPRS nework to play the video, it first to ask "Switch to WAP for streaming media? (with wifi that he won't ask) so I press ok and it uptempt to load and an error message "content not available. Server is blocked or unresponsive. ", it goes with all the videos I click on that. Help, please.

  Thank you

  Let me share my personal experience on the subject. When they are facing the same problem, I asked my provider and they tried to pull a fast explaining that viewing videos on the 3G network is dependent on the device and that it is not possible to videos on my BB "BOLD" due to speed issues. They even suggested that I buy an iPhone 3G given that subscribers who do not seem to display YouTube videos problems. A load of rubbish! After only a brief workshop organized by RIM and my career, I was "unofficially" informed by a member of staff that it was a TCP/APN issue. I take advice, made the necessary adjustments, and was able to view Youtube videos on the 3 G network without problem. However, my Bill the next month floored me. Even if I'm on a package data unlimited, I was charged an extra $ 70 on top of what I usually pay. Learn more with my carrier, they were kind enough to inform me that I have to access the Internet via their APN address, which translates into a lower speed of AFN, orI will have to pay for accessible data on the other addresses of the AFN. I supported with my questions and my carrier eventually admitted that they were actually limiting the speed on AFN as allowing only some mobile devices to access data at 3G speed. Then you tell me!

• Broadcasting subtitles/captions position changes after the backup. subtitle, first pro cc problem

  Hello

  I'm working on first pro CC 2015.3.

  I put subtitles on my support.

  I choose to put down to the center using the small box (with 9 positions) but when I save the file, subtitltes position change a bit and they are no more in the Center. Sometimes a small portion of the text is off the screen.

  THX (and sorry for my English)

  Hello

  I work on first pro 2015 cc.3

  I added sub titles on my video.

  I put some money down en title centered to the screen with the help of the box with 9 automatic positions.

  At the beginning it works and when I save and reopen the file, the sub titles have moved and are are shifted. Some of the text is even outside the screen.

  Thank you for your help.

  Hello

  I got the solution. It is resolution safe or secure portal.

  I put the solution if anyone ever need.

  Your captions or subtitles may not exceed your security door or gate ground track. You need to reduce the font size or move to another line to shorten. Because first changes automatically position if it s more limit.

  However, if you want to be on these limits (ground/door chest) you can set with the scale and the effect of the track position.

  Hello again I found the solution.

  Solution alone, I share you although I think qe I must be the only jerk for not thinking about it.

  The problem comes from the ground and safe door car first pro will automatically substitute the captioning at best pour in stay standards.

  Possible solutions

  -in the absence of strike reduced the size of the

  -make line breaks.

  -Play with the scale effect parameters and positions of the captioning.

• Illustrator CS4 is no longer present in preview fonts in the character palette after upgrade to Yosemite... Help, please

  Illustrator CS4 is no longer previews of fonts in the character palette after upgrade to Yosemite

  Help, please... Thank you
  

  Got a solution guys. The new transparency is the problem. Go to System Preferences > accessibility, and select reduce transparency. It should work.

  

• Rendering fonts were going badly after update 32.0

  After the recent update, the police started making bad. Kind of blur with jagged edges and transparent parts. It used to be well D:

  Sometimes it is OK for a while I scroll pages, and sometimes when I stop scrolling, the police remains as it is. as if there are specific positions render text correctly. However, not all policies are affected. Those inside the scrollable area.

  Times that the police properly, return the bookmarks is, title bar and the tab name is unaffected and appears is not smooth. Same is not the case on other browsers. All my other system fonts look good; It's really just Firefox.

  Restart Firefox = failed
  Restart computer = failed
  Tried the clear type = setting did not work
  Tried to activate and disable hardware acceleration on Firefox = failed
  Tried the activation and the deactivation of the graphics card itself = failed
  Tried pretty much all the advice I found on Google = none worked
  Tried the complete uninstall and re - install Firefox 32.0 = did not work

  Graphics driver is updated.
  Windows is updated.

  I use Windows 7 Ultimate 32 bit
  Graphics AMD Radeon HD 6800 card

  I fixed it by downgrading to Firefox 31 who assures me that 32.0 is the culprit. As I was about to send the message at the top. I tried without decommissioning as my last resort, and it worked. Now I send you only that in a report. I hope you will understand what caused it because I'm quite strict (OC) that everything in my PC must stay update > _ <. so, I want to use Firefox 32.0 as much as possible.

  You can try with the catalyst beta driver of http://support.amd.com/en-us/kb-artic.../latest-catalyst-windows-beta.aspx? 14.4 catalyst has been blocklisted for direct2d because of stability issues in firefox 32 (bug #984488).

• X 1 slice battery goes bad after less than 24 hours.

  installed new battery slice on the X 1, got fully charged.

  After using the computer on and outside, including automatically putting in sleep mode, battery now show 87% then it says:

  2 battery: The battery error has occurred. The battery cannot be charged. Replace the battery.

  Tried to reset the State of the battery, as well as to drain and recharge. He doesn't really like it seems to cancel the first battery and will just not work without power.

  When connecting power I get the clear orange for a few seconds and then no.

  Computer works fine without the battery slice.

  I called support and opened a ticket but it's always a shame that after 1 month of waiting time for the battery: it lasts less than 24 hours.

  anyone of these problems?

  Ronen

  
  

• Problem with the game of content after adding an effect to fly a form like a button

  Hello

  I created 3 shapes like buttons. They are the fly-in on the stage separately, one by one. The problem is that just before they fly-in they pop up for the second half, then disappear and fly-in as it was programmed.

  I discovered, that when 'use as button' option is off, everything is fine. Just fly-in such forms as requested. But what 'use as button' is turned on then Cp behaves as described above.

  None of had similar problem? If anyone of you can replicate it?

  As a workaround you could fly in shape (and not as a button) and then cover it with the same shape as the button when the effect is complete.

  Not very elegant but...

• I downloaded creative cloud successfully, but does not find Adobe after effect in that. Help, please

  Please help me to continue my path free so should I decide to buy or not. I want to only use adobe after effect. Thatnks

  The cloud interface will only list programs that are compatible with your system.  Check the system requirements for After Effects on your machine.

  After Effects - http://helpx.adobe.com/after-effects/system-requirements.html

• Quality mediocre speaker after moving my Mac Book Pro

  Hi all

  Was moving around my Mac Book Pro to show my sister home, then all of a sudden the sound quality of the speakers has deteriorated and that he was not as crisp as before. Should I just allow the speaker to stabilize by asking my Mac or should be verified by the Apple support?

  Look forward to your advice.

  See you soon

  Gary

  Mechanical devices generally lack the capacity of self-healing.  Make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

  Addendum: You could try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063