VideoRecord-> part and speed/duration

Similar Questions

• There is no option of optical flow on my png image sequence clip, I looked in the video clip and speed/duration options. interpolation of time is not an option?

  I am trying to extend my clip (which is a sequence of png images) using optical flow, the clip runs better.

  When I right click on the clip - go to the speed/duration, there is no list drop-down option for optical flow, or an option for time interpolation.

  I also went to clip - video options, but there was no interpolation time or option of optic flow there.

  Please can someone find me?

  I use adobe first pro cc 2015

  It should be under effects/time/time warp. I found the easiest way is to add it to an adjustment layer in AFX.

• HP 15 t touch M8U72AV_1: M8U72AV what type and speed memory took this Lalonde

  What a memory this hp laptop does take? What is the type and speed. As ddr3 or ddr3l. M8U72AV

  Here is the Service Manual:

  Manual

  Two not customer-accessible/upgradable memory slots (Intel Core processors) module DDR3L-1600 channel double support

  Page 42. There are some models where you need to remove the motherboard. On your own, you can remove the entire bottom panel and memory is exposed without removing the motherboard. If you mess with her compromise you security, but HP will honor the warranty if you do without damaging anything.

  He will accept a second module of the SO-DIMM DDR3L-1600 4 GB, for a total of 8 GB, which would improve performance a bit. This is the HP no. part.

  4 GB 691740-005

  It's good memory:

  http://www.Amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/DP/B00CI08FX4/ref=sr_1_1?ie=UTF8&QID=1438515158&SR=8-1&keywords=691740-005

  Good luck.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.

• Clip speed / duration timecode format view

  Hello, I am new to Premiere Pro. I have worked with the program for a few days and every time I edited the speed/duration of a clip, format the duration always read as some variation of the standard of 00:00:00:00 that I'm used to seeing. However, at the start of another new project today (using the same video clips as I use for the last couple days) I noticed the format for the duration of the time bed is no longer in the form 00:00:00:00 , but instead reads like just 00.

  For example, a clip that is 01:18 now shows 49. Here's a screen Cap:

  

  I used this clip (and many others like him), and he has always displayed its duration in the format 00:00:00:00 . I guess I have enabled a setting without knowing with a cmd + hits, but I don't know when or where. How can I get the duration is displayed in the format of 00:00:00:00 again?

  Thank you!

  OK, think about it! I managed to get hold of an editor in my company who is highly educated with Premiere Pro.

  The time in the sequence settings base has been failing at 10 fps (because I had a beginner workflow and the first file I want to add to my project was a simple movie clip that was only 10 f/s, which by default the setting sequence of the project at 10 f/s) (, and I do not have to observe this). Once I moved the time up to 29.97 base, I could select the option for 30 fps timecode offset, or something else that I love:

  

  

  But thank you for troubleshooting! He took me certainly helped.

• How to adjust audio speed/duration over time?

  I watched a video on how to adjust the video duration and speed over time, using time remapping and keyframes, but it doesn't seem to affect the audio for some reason any. Is it possible to adjust the speed/duration of the audio over time as you can do with the video?

  No, you need AE for this.

• Using speed / duration to Points in a Clip

  Hello

  Great forum!

  I use the Premier Pro (v6.x) and I have a clip which is 10 seconds in length. Between the mark four and eight seconds, I need to use speed/duration for this slow down to about 10% of the original speed. How this is done?

  Thank you very much and keep up the excellent work!

  Mark

  Clip 1: up to 4 sec.

  Clip 1 b: 4-8 s and apply the duration or time remapping for the slomo.

  Clip 1 c: 8 s from.

  You can razor clips or use keyframes or use a copy of the 4-8 s, apply the slomo and replace the original. Many ways to achieve this.

• I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

  I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856

  @Santonio99

  You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work.  You have a paper weight.

• Frequency of signal and pulse duration varying as to reduce the duty cycle

  To sum up my problem, I am creating a period and the controlled voltage pulse sequence, but as I decrease my cyclical report, the distance between each pulse begins to become irregular. More precisely:

  I want to have three pulses, each a positive amplitude specified, long, with 23 ms between each 80 microseconds. After these three impulses, I would have a negative pulse of 3 * than amplitude, followed again by Ms. 23 this cycle must be repeated 260 times.

  I tried first of all to create the positive impulses to help simulate Signal VI, assigning a square wave with a frequency of 43.327556, an offset of 0.5 and the amplitude of 0.5. And the operating cycle as the default value of 50%, the signal seems to be normal (constant frequency and the duration of each pulse is equal;) "I'm in a position with an oscilloscope).  However, when you set the duty cycle for. 3466%, the time between each pulse varies and some legumes are longer than others. I wrote the data able to file directly from fake Signal VI to ensure that he was not only a problem of scope, but it seemed that writing to a file of measure has not sample enough points for me to accurately measure. Even decrease the market barely 10% factor, I see the question arise already.

  So my question is, I'm doing something wrong here? It is a kind offset of Labview to try to perform a duty cycle that small? And are there any alternatives to the way I have this set up? I thought I would try to use a train of pulses instead, but I'm not very familiar with this and I know, you can't control the amplitude of the pulses.

  Any help is appreciated! Thank you very much.

  My guess is that you are limited by the sample rate. If the difference between the two signals time is less than the sampling period (1 frequency / sampling), you will not be able to generate the signals you want.

  Please tell us the sampling rate, you use and the settings that work and those that do not. If your data file is not too big, please post so that we can see some data. Post your VI can help too. Check the default settings before you save the VI.

  Lynn

• What is the amount of maxamum and speed of ram for acer aspire 5733z?

  I can't seem to find anywhere it teels than me the maximum and speed of ram of the machine (5733z) can manage. I want to perchase and upgrade of physical ram me. You know 5 minutes

  Nice day

  Until 8Gig DDR3 1333 Mhz with ram 2 chips

  Kind regards

  FReeZA

• Windows XP: My hard drive failed in part and I can't access the folder "my documents"...

  Windows XP SP2 from the CACLS
  Windows XP: My hard drive failed in part and I can't access the 'My documents' folder, windows it says ACCESS_DENIED. I tried grant permissions through CACLS and switches appropriate, but I still get messages ACCESS_DENIED. Can someone help me please I have 60 GB of data on it to be recovered. I backup this but is 3 weeks old. Regards Alan

  Hi Malkeleah
  Thanks for the reply, the reader had not failed, but windows had use of the access denied files because I was on a separate computer with a new master drive. Now recovered data and support to the high new outside. Thanks again for your help. Alan

• WRT160NL Exchange download and speeds.

  Hello world!

  WRT160NL Exchange download and speeds.

  

  Before the router, everything's fine, then it is wireless or Ethernet port is over situation.

  No difference what firmware it is (1.0.02, 1.0.03, DD - WRT...)

  There are many things to take into account for the same problem, I found this link then. You can check this, http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22110

  Also, have you tried to reset and reconfigure the router? If this is not the case, try to do first.

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• How do you determine the type and speed of your RAM installed what?

  * Original title: laptop RAM

  How to determine what type and speed of your RAM installed is.

  Gift little Handy dandy named Speccy.

  http://www.Piriform.com/Speccy

  Once completed its display, click on memory

• How I've spread my video into several parts and save each file under different names?

  How I've spread my video into several parts and save each file under different names?

  You are going to need a video editing package to do this, you can not cut just to the top of the video into segments at the file level.

  With an editor, you can then crop the video into segments