videos must be completely charged before streaming

Similar Questions

• Captivate 5.5 - event video freezes after completion

  Hi all

  I am trying to create e-Learning courses.

  I want to have a video in a slide. Here are my requirements:

  (1) video should be a video of the event.

  (2) I need to control the video of the event with the controls of the player project is to say there should not be two player controls

  (3) at the end of the video, the course should go to the next slide

  Note: I can't insert video slide corresponding to the duration of the slide. The goal is to use the video of an event like video slide corresponding to the duration of the slide.

  Test 1: I've selected calendar as "precise moment" and enter the value equivalent to the duration of the video. Also check the 'synchronize with the project.

  Issue here is that, whenever it is buffering, time differences and the progression to the next slide slide, before even the video ends

  Test 2: I selected the date in the form "video time" and checked the 'synchronize with the project.

  Issue here is that the project is frozen after the end of the video and does not progress to the next slide. Even the manual control of 'Fast forward' or 'Play' will not work.

  Tried to change the blade that is identical to the duration of video duration timing less than video and more video. There is no use.

  I understand that it's complicated. Any idea or suggestion to remedy this problem?

  Thank you and best regards,

  Bruno Arunjunai

  Hi all

  I couldn't find the reason why even the video hangs after completion while setting the date in the form "duration of the video.

  However, I found the means to my needs.

  I added the video of the event. Hourly, has selected rest of slide and disabled the "slippage to break until the end of the video" checked synchronize with the project.

  From now on, there is no problem.

  Thank you best regards &,.

  Bruno Arunjunai

• How can I set a password for firefox so that everyone must enter the password before running firefox

  My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

  Another option is the master password + extension.

  You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

  As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.

• You must stop your request before the engine may stop

  I have an integrated application that uses LV DSC 6.0.2. The application starts and stops the engine tag programmatically. The application works fine, but on some machines, I'll get continuously the next dialog box when I try to stop the engine of the tag:

  "You must stop your request before the engine may stop"

  It's strange, because it only happens on some machines (it seems that it can occur on computers with ONLY of DSC Run-Time installed, not the full dev system. DSC LV).

  The dialog seems to refer to the application of 'control' which tries to stop the engine... it isn't telling me that my devices servers need to be stopped.

  This dialog box does not seem logical, I should be able
  to build an application that can start and stop the engine... and why I get this dialog on some machines but not on others?

  John Paul,

  There are two points that we should ask ourselves:
  1: you can have different loops while in your application where you read/write to and from the engine of the tag with the read/write Tag.vi. These screws has a stop of production which must be wired first the while loop. If you have cases where you do not connect this output to your time stop loop you could access the engine while you want to stop the engine in another loop with the Shutdown.vi engine. -> Make sure you have all drivers of DSC to access loops has stopped before you turn off the engine.

  2nd: I guess he was once an issue of race with the DSC engine condition and how it access to shared memory with the read/write Tag.vi. But this condtion of race must be agreed with the version of LabVIEW DSC
  6.1 or with other fixes for LabVIEW DSC 6.0.2. You can download patches (in this case, particularly the BVRTDatabase.dll) driver update page & of NOR: www.ni.com/support/ > Option 3, drivers and updates > Search drivers and updates > type 'LabVIEW DSC' > choose LabVIEW Datalogging and Supervisory Control 6.0.2 fixes.
  You must apply the patches of this as well on your DSC 6.0.2 Run Time System!

  I hope that one of the help of two suggestions to solve your problem.

  Concerning
  Roland

  FTP://FTP.NI.com/support/LabVIEW/labviewdsc/fixes/6.0.2/

• When you try to uninstall several programs via the Control Panel, I get a message that "another installation is in progress and must be completed first". I have no other current facilities. Windows XP Home Edition

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello dutchb,

  The error, "another installation is in progress and must be completed first" can be attributed to the InProgress key found in the registry at:
  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CurrentVersion\Installer\InProgress

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I suggest that first make a backup of the registry or a system restore point. Then go to control panel, administrative tools, Services. Do scroll down and find the Windows Installer service, and set the start at the stop State. Delete the registry key to the location above.

  Now, you shouldn't get the installation in the progress message when you try to uninstall programs.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx

• Can we get a video clip for WINDOW 10 before August 29?

  Can we get a video clip for WINDOW 10 before August 29?

  What do you mean by video clip?  There are millions of clips of all the latest versions on YouTube, officially of Microsoft and enthusiasts who like to share.

  In addition, if you run the preview edition, you can open the application 'Getting started', and there are videos more functions and features.

• IOS XR - How to show the complete changes before committing?

  In IOS XR, there is an order to see the complete changes before committing? For example:

  RP/0/0 / CPU0:INET #show running-config prefix-set MYPREFIX
  Mon Oct 24 15:06:16.288 ARBUE
  all of the prefix MYPREFIX
  the 10.0.0.0/8 32,
  172.16.0.0/12 32,.
  192.168.0.0/16 32
  end-set
  RP/0/0 / CPU0:INET #Configure terminal
  Mon Oct 24 15:06:30.427 ARBUE
  RP/0/0 / CPU0:inet (config) #no set prefix MYPREFIX
  RP/0/0 / CPU0:inet (config) #show the configuration
  Mon Oct 24 15:06:38.767 ARBUE
  Building configuration...
  !! Configuration of the IOS XR 6.1.1
  !
  no set prefix MYPREFIX
  end

  But I want to see the full content of all of the prefix before validation, something like this:

  RP/0/0 / CPU0:inet (config) #show configuration?
  no set prefix MYPREFIX
  ! the 10.0.0.0/8 32,
  ! 172.16.0.0/12 32,.
  ! 192.168.0.0/16 32
  ! - cover

  Ditto for the political course and for the BGP neighbors. Thank you.

  You can get a diff of the changes, like this:

  lab01(config)#no prefix-set MYPREFIXlab01(config)#show commit changes diffWed Oct 26 15:56:21.322 CESTBuilding configuration...!! IOS XR Configuration 5.3.4 !- prefix-set MYPREFIX- 10.0.0.0/8 le 32,- 172.16.0.0/12 le 32,- 192.168.0.0/16 le 32- end-setend

• Who can send an e-mail for technical assistance when a must upgrade my system before I have give up Firefox completely?

  As this last change to Firefox, upgrade 41 and a little, I had problem with access to a variety of regularly used sites and went back to the site of Firefox to download a new version of the software, Firefox now tells me that it can't load my profile. Firefox now won't work at all.

  I am currently using Internet Explorer and have miserably failed to attach a photo again the error message from Firefox. In essence, it says: "cannot load your Firefox profile. It may be missing or inaccessible. »

  Any ideas?
  Martin

  Hi martin, please press the windows key + R and open: %APPDATA%\protector.exe
  a window of the Explorer is opened upwards, in there rename the folder called "Mozilla" to something like "Mozilla.bak" - then firefox should start over.

• Error 1500 "another Installation is in progress you must complete installation before continuing this one ' when trying to down load a program always appears. Unable to complete the download

  Error 1500

  Hi Frank,.
  Welcome to Microsoft Windows Forums!

  I would like to gather more information about the issue.

  Ø summers - get you this error during the download or installation?

  Ø what application are you trying to download?

  In the meantime, you try these methods.

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after the computer starts, check if the problem persists.

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• backup of the complete phone before repair

  My iPhone SE earphone is damaged as a result of certain dust went inside. I wish him well more (not even 2 months)
  I'll give this to fix it, but I have to take a complete to the top of my phone before I give him.

  I made the back upward using settings-> iCloud-> backup

  I want to have a full backup (all that I should be able to restore photos, emails etc...)

  Please indicate the extensive safeguarding measures.

  If you want to back up all your data, including your health data, you must make a backup of encrypted. iCloud will ensure the encrypted backup, but you must understand all iCloud backup against everything iTunes backup. You might want to take a look at this support on safeguards document to understand all this.  On safeguards for iOS - Apple Support devices

  If you choose iTunes, then also take a look at this support document on the encryption of an iTunes backup. Read the whole thing, because if you have forgotten your password for the encrypted backup, you must delete it and restore the unit to the factory.  On safeguards encrypted in iTunes - Apple Support

• Charge of streaming while blackBerry Smartphones?

  Hello everyone,

  Newbie here. Never had any kind of Smartphone before so forgive me if this seems a silly question.

  I want to stream through my phone radio (I have the AT & T data plan unlimited BB). I know he uses a lot of battery to do this. My question is if I can use the USB data cable provided with the phone, plugged into the USB port on my monitor, to charge for radio streaming? I wasn't sure if it would work at the same time like this.

  As I said probably a really dumb and simple question for you all, but I'm about as new on what you can get.

  PS. has got good ideas for a stand? Didn't need to be at the loading dock (I'll have for the House). I just want something to work, to support the phone while listening.

  Thanks for the help!

  Yes, you can certainly the audio streaming device.

  No problems.

  For a stand the charge pod work. I don't know of a pure 'stand' with no other function.

• problem complete charger

  section 1:

  Stop();

  mc.contentLoaderInfo.addEventListener (Event.COMPLETE, goNext); I also tried without contentLoaderinfo, same result
  

  function goNext(e:Event):void {}

  gotoAndStop (15);

  }

  inside 'mc' I have script that charge about 50 images of the scene.

  problem is never executed goNext , I tried several approaches, it is just stay at frame 1 and if I don't have this code on frame 1, Yes, he's going to 15 thereafter, but only half of the images are loaded into the stadium (sometimes more, sometimes less)

  Of after what you just said, you make a load of images, then there must be a form any where the Chargers in use, and that's what you have to control for completion.

• Apply setInterval after completely charging?

  How can I tell setInterval start to calculate time after the image is completely loaded? (This is because some of my images take 3 seconds to load)

  var IntervalID = setInterval (myShow, 10000);

  You must have a listener for the load operation.  For a listener for a charger, you must use the MovieClipLoader class.  Search for MovieClipLoader.addListener in the example documents code.

• Stream video to 3rd party Service of Streaming

  The company that I work pays a 3rd party for streaming services. Usually, it is shown through Windows Media Player, etc.. I would use a video file of the 3rd service part in a Flash app that I'm building.
  
  At first, I thought it would be easier to attribute the url of the video stream in Flash Media Encoder, but that did not work. I guess when you select already "deployed on a web server. ", the extension must be or.xml .flv. The reason that I don't deploy just the video to our server, is that the Director does not fear that the large file would block the bandwidth.
  
  So the question is, can I use a url like http://www.domainname.net/company/...MEDIA_ID=571166 & MEDIA_EXTENSION = asf & MODULE = ANGRC
  as the source of a .flv file? If so, how?
  
  As always, any help is greatly appreciated, thanks in advance.
  
  Pharaoh

  Yes, you use the FLVPlayback component if you use the import video Wizard in the way you described. I just did a quick test, and it looks like the 1.0.1 last updated for the FLVPlayback (AS2 version) component generates an error if you use parameters in the contentPath value - it assumes that you load a SMIL file if all parameters are detected. So, you have two options, none of them "fun":

  (1) have your script server-side a SMIL file indicating the path to the FLV file. SMIL is just a simple XML text node base formatting you can use to describe how FLV bitrates are available. In your case, you have just a FLV file.

  (2) build your own file of NCManager class for use with the FLVPlayback component. You can do a quick fix to the existing NCManager class used by the FLVPlayback component and set the new class file in your own custom class path.

  Sorry for the misinformation (or earlier). I think that adding a suffix of .flv to the URL of the script worked in the original FLVPlayback component comes with Flash Pro 8. If I have time this afternoon, I will build a custom NCManager and zipper in a file, you can download and watch.