Charge of streaming while blackBerry Smartphones?

Similar Questions

• Time of Charge along for the blackBerry Smartphones Priv

  Bartery takes a lot of time to load takes 7 hours to charge completely of 40 percent on a Qualcomm 2.0 charger may be a % every 5-8 minutes

  Hi @falloutsteel117

  If you haven't done so already, please restart the device, and run tests using the charger provided in the box of your quick charge charger 2.0. To identify the charge current, install BlackBerry virtual Expert and open after you have connected your Chargers - can you let me know the results?

  With the help of installation and use of Virtual BlackBerry Expert check out this post > http://blck.by/1SiKKeq

  Thank you!

• Videos Streaming of blackBerry Smartphones

  Why can s I stream videos to my BlackBerry Bold 9900?

  Videos that you are trying to listen to are probably made with Flash, which is only supported by the BlackBerry PlayBook. Try streaming from another site as a test.

  See you soon.

• Charger for Curve 9360 blackBerry Smartphones

  Hi, quick question.

  I just went to a Telus authorized dealer to get a wall charger so I can have a second charger for my Curve 9360. When I got home, I noticed that the little written on the packaging says that it is for the storm 9530.

  The connection is part of my phone, but they put the sticker "guaranteed no if removed" during the section of the magazine that says what is the output of the charger. Does anyone know if the 9530 charger is compatible with the 9360?

  Thank you

  -John

  Hi Johnbd

  Yes, all Chargers, since the release of the BlackBerry Storm, will work on any device.

  Thank you

• Charging of the battery/blackBerry Smartphones Blackberry problems

  ... My Blackberry has problems. One night I plugged it to load (I always charge it all night, I think it's about 10% charge left). The next morning, I discovered that although I had plugged everything, it didn't load. So he then stop and not restart. When I plug it now, the light blinks red then the white screen with an empty battery icon opens. And does nothing else.

  --------------------

  UPDATE:

  I downloaded the desktop from the disk software, plugged my BB to the computer, did nothing, now the light just flashes green (which I think indicates a full charge) but when I turn it on, it instantly says "battery discharged, turn off your handheld".

  any suggestions? It's a little crazy.

  Leave the appliance to charge 2-3 hours and then, always toujours relie connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• BlackBerry, change of sim card and ID blackberry Smartphones roaming charges

  I did a little research and although have found similar cases, I'm not quite sure if this has been covered completely. Please forgive me if it has.

  I'm going abroad in Germany for a year, and it is useless to cancel me my current plan of the monthly British payroll with Vodaphone. As far as I know my blackberry is unlocked at the international level - I put an old, German o2 pay as you go sim in my phone. Seemed to work very well (sign of o2 Germany, received a message on homelessness in the UK, etc.), but I had no credit so couldn't test. I registered again my user ID of blackberry on my home wi-fi. But other that I couldn't do much to verify the extent of my use.

  However, I heard various accounts of not being able to use e-mail, internet, wipe the contacts, etc..

  If someone could clarify this, here are my questions:

  • If I take my sim UK vodaphone, is anyway I have accumulate roaming charges? Is my blackberry ID, potentially with a new German supplier, related to my old?
  • Will he make any question tries to access my email, bbm, whatsapp, etc., with a different number and in a different country.

  One has experience in this area, in Germany (a long shot), Europe or world? It seems that the whole ID blackberry complicates things.

  My phone is a Blackberry Bold 9900, AFAIK its software wise update - I have updated today with the "Bundle 2061 7.1" I think.

  Thank you

  J.

  Hello and welcome to the community!

  There are a number of problems to know for what you propose... Here are my thoughts... (Note that I have traveled internationally widely enough with a BB).

  If you activate a plan of itinerant international with the support of your home, you should be able to keep your current SIM card in your BB and have all the features anywhere where you are allowed (according to what your home carrier active). Costs are not small in general, but your home operator is the only entity that can tell you if it will work and for how much money. My personal experience with this method was difficult, it took two 'stranded' international travel before my carrier home could properly configure my account for full international roaming I needed. And once my BB was out of my home network, there was nothing else they could do... so the two 'fail' the TRIPS Agreement.

  Given that your BB is unlocked, you can use it on other carriers, simply by changing your SIM card. But with BB, it is not quite as simple as that.

  No BB does exist (indeed, no device anywhere that I know of) that has all the radio technologies/frequencies within the view are just too many in the world. Thus, your first task is to ensure that your BB has the ability to the same function on the support networks you want to use it on. You must study the capabilities of your specific BB against the requirements of networks you will operate on... you may need to ask those network operators for more details.

  If this element is satisfied, which then verifies that you have services at the level of the voice (calls, voice mail, SMS). But for level data services, increase complications.

  Each company chooses patterns specific to BB (by model number) that they will promote "automatically". I do not know the carriers that have their network configured to support all the model numbers of BB. If the carrier you wish to automatically use your BB model number on media, then their system will be able to automatically deliver to your BB Service books required in order to activate the BB exclusive services (email, BBM, etc.). But, if their network does not natively support your specific model BB number, then their network is not likely to be able to automatically deliver these Service for your BB books... which will prevent the use of their network BB exclusive services. Again, you must inquire carriers on which you want to run if your specific model BB number is supported by their network for the automatic distribution of maintenance book.

  In addition, it is to ensure that your home carrier frees your BB PIN of their system of BIS. A BB PIN can exist in only one carrier BIS system anywhere in the world... so if your home carrier doesn't release him, then the other carrier will not be able to allocate a BIS account for you, and you still won't be able to use services BIS of them. In this case, it is usually a matter of contact your supplier of home and convince them to release your BB PIN of their system of BIS.

  If all goes well and all the conditions are met, then it can be quite transparent to switch between carriers, simply by changing your SIM card, ensure that each SIM card includes good BIS Services this carrier of course.
  But if anything this either in the chain requirements above fails, it can sometimes be frustrating to make the things work pretty well (reminds me of my two "failed" international travel).

  So, with all this as preamble, now to your questions...

  jpfp wrote:

  • If I take my sim UK vodaphone, is anyway I have accumulate roaming charges? Is my blackberry ID, potentially with a new German supplier, related to my old? J.

  Given what you describe, I see no for Vodaphone to charge you roaming charges. Without their SIM in your BB, your BB may not even try to use any resource of Vodaphone. But, you will need to get confirmation of Vodaphone on this point... so that they control all services, billing, etc. for your account. BB services you are subordinate to your main carrier services... you need the services of the main carrier to provide network connectivity services BB riding on this network connection.

  jpfp wrote:

  • Will he make any question tries to access my email, bbm, whatsapp, etc., with a different number and in a different country.

  There are always opportunities for questions. When you use a different SIM card, you are constrained to some services that provide the SIM. If it does not, for example, BIS level services, then you won't access to people. Similarly, if there is some government restrictions for some services, you can be restricted from that as well. If you get a SIM card with full services of BIS and, as described above, you spent all of the required components that I have listed, then you should be able to have all the services you listed. It is possible that you may need to reconfigure your email... There are stories about these configurations if shattered when change carriers... but the BBID integration is intended to facilitate this exact type of change of carrier, so it should not happen. But don't we can, of course, no promises.

  Good luck!

• Error jvm 102 on Blackbery Bold blackBerry Smartphones

  White screen with JVM 102 error. How can I fix it without losing any data

  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECPs = com.dataviz.dxtg.stg.excel.xls.
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECCs = Excel97Model
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECMm=()
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPEs Module = ' SheetToGo47-4' ran out of memory while checking (603)»
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPKv = 1
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPNs = SheetToGo47-4
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM: + BORK
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : JVM error 102
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : invalid code in filesystem
  time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : JVM:INFOp = 2280a8b3, a = '5.0.0.586', o = '5.1.0.146', h = 4001507

  Hello Drgnh

  Welcome to http://supportforums.blackberry.com/

  The JVM 102 error occurs when one or more files COD, either from an application or the operating system itself, are damaged as a result an immediate stop of all processes in the BlackBerry Smartphone is generated, preventing the loading of the operating system boot sequence.

  The BlackBerry software should update the phone.

  Search and download your OS and everything above applies

  By sdgardne 

   

  However, here's what I propose...

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry smartphone Curve 9360 sometimes warms us up a little bit and the battery is discharged

  Hi, my blackberry 9360 is sometimes a really weird thing. Once a week, after that I used the device to check email, check facebook or even simply by removing the door in leather and put it right back it drains the battery at a very fast pace and hotter than usual. I'm not aware immediately, but when I use the unit 3 hours later for example the battery is almost all gone and the unit is warmer than usual. Please not that it is warmer, but at a level acceptable, just as if it had been used during this period of time, not overheating. I charge the unit and check the activity monitor application and the CPU was mainly used by the... Idle CPU. The part of the device that heats is not the battery, but the device itself. It is rather annoying because I don't know when it will happen again. The only email account, I have installed is a Hotmail account and it goes as well with wifi on and outside. Someone has an idea it might be? Thank you in advace for help. Best regards, Alexander

  Hello alexandrejv

  Welcome to the Forums of the BlackBerry Support

  Are sure you you are in an area where you have a good network coverage signal strength or if falls frequently.

  While our BlackBerry devices can feel hot tell a long browsing session, play games, download countinous or all supported. If we hold the Menu for a few seconds, it will open a screen that will display all the programs running in the background, usually five will always be there (host, BBM, Message, phone, browser) you can always check if any other applications. run in the background.

  We should always try to close Applications correctly - avoid using key end to close the applications because it just minimizes the application and let it run in the background. Instead, press the Menu key, select close or Exit to exit the application. Don't let your browser open when not in use. If programs are running in the background, it will also allow overheating and also to quick battery drainage. Please take a look at those Article I don't know that it will help you overcome your problems:

  KB14320 How to maximize the battery life and available memory on the BlackBerry smartphone. 

   

   KB31531 : BlackBerry Smartphone 7 may feel warm during operation

   

  But, if you feel that this device heats up more then average, then you should visit your service provider for assistance.

• Using software update to blackBerry Smartphones.

  I had planned an update last night to demand for 2300 hour British. When I woke up, I found my phone was off and the charger was out of my phone. When you turn on again my phone, he immediately started backup software, which was going well until he started the social RSS update. Due to the fact he did not pay all night, it was not connected to a sense of network, it appears 'Social Feeds 0% '. Unfortunately, I can't leave this screen and so it tried to save social stream without connection for the last 6 hours.

  Thank you

  Tom

  Hello and welcome to the community!

  First - reduce the size of the font in your messages... the effect is the same as if you had used ALL capital LETTERS, for which this article could be useful:

  • http://kathrynvercillo.HubPages.com/hub/what-people-think-when-you-type-in-all-caps

  Now to your problem...

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• BlackBerry smartphone app error 603 and BBDS does not recognize my device

  Here's the situation: the battery ran out on my unit earlier this week. When I started to charge, the unit will start automatically restart. Before restarting, the messages "error app 603' and 'reset' appeared. If I click "reset", the whole process starts again.

  The previous messages in the forum I read about 'error app 603' suggested I should restore the device settings or reinstall the operating system. I tried to connect my device to my laptop via USB cable, however the computer will only recognize the connected device with a chime at the beginning of the discount to zero, followed quickly by a chime of disconnection being rebooted. The computer or software Deskstop BlackBerry recognizes the device while it is stuck on the '603 error message' app.

  What else can I try?

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000023951&language=English

  For the charging of the OS, you can better use this method... on a PC (you can't do this on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. Sorry, already a moot point counts with the error.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (6) work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of step 6, your BB presents "507" error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones active new SIM - now phone SOS only

  Hi all. Have a little problem. I had to go back to an old 9700 When my current iPhone broke. I needed a new card SIM from the iPhone using a different card. When I called Rogers to activate the SIM everything was fine for about a minute. I received texts that were pending since Sunday when my iPhone broke. I had full bars etc. Once a minute, he went to SOS only. While I was on the phone with Rogers Tech Support I have reset and removed the battery and SIM and all the things they wanted me to. Everything looks good on their system, he said that the problem must be with the device.

  A bit on the device:

  Originally with Mobilicity in 2009. Opened and used with the wind. My father then used with Rogers and Fido. Since Sunday, when my phone broke, I used SIM card of my brother-in-law (he just swung at Rogers to the wind, but his plan has always been paid until the end of September) and the BB worked very well. If it worked correctly with a Rogers SIM.

  Now, I get the same problem with my brother-brother SIM. SOS only. No connection. What happened when active Rogers SIM card must have done something to the camera itself because now it does not connect to any of them. That both SIMs work as I have tested both in my wife's phone.

  The guy on the Support of Rogers suggested that perhaps the closed phone itself - but when I enter the settings advanced for the SIM card that everything is disabled in customization... so it appears not to be locked.

  He said that I should try to reinstall the OS, but that it will block the phone and I need to unlocked again.

  Is there anything else it could be? Will reinstall the OS relock the phone? Any other suggestions?

  Thank you very much!

  Hello

  jvnanu wrote:

  The guy on the Support of Rogers suggested that perhaps the closed phone itself - but when I enter the settings advanced for the SIM card that everything is disabled in customization... so it appears not to be locked.

  He said that I should try to reinstall the OS, but that it will block the phone and I need to unlocked again.

  Is there anything else it could be? Will reinstall the OS relock the phone? Any other suggestions?

  First this... avoid this tech Rogers like the plague. He has no idea what he's talking about. All what he told you is simply not possible. Once MEP unlocked, a BB device can blocked at the factory. Nothing of what you have done or the facilities of any OS can relock a BB.

  I'd rather a complete security on the Device Wipe:

  • KB14058 How to delete all data and applications in the smartphone BlackBerry using the security option wipe

  Otherwise, a ResetToFactory WIPE:

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  After each one, put it in the SIM card and switch on the device, and then make sure that the voice is through Rogers. Only then start to worry about getting all the data to work (if you subscribe BIS, in other words).

  If you want to get off the OS Reload path, then the easiest way is, on a PC (you can not do this on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below. (not applicable in your situation)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Issues with BBM blackBerry Smartphones

  Whenever I charge my phone or restart I notice my bbm dates back to ancient times, I get previous pings and current pings will no longer appear, also dp displays more peoples. I decided to back up my contacts, delete and re install the app but realized after the reboot, I can download is no longer bbm as he shows me app World, bbm is already installed, but can't find anywhere in my phone. Please help I need my bbm back

  Hello presh007

  Welcome to the Forums of the BlackBerry Support

  If you already verified and that you are unable to locate your BBM icon, then you should try reinstalling the BlackBerry Messenger application, it may be useful.

  To do it from your home screen to go to Options > device > Application Management > locate and delete BlackBerry Messenger from this list.

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

   

  Deleted once perform a battery pull reboot by removing the battery while your device is turned on, wait a min. and then reinsert this return.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the most recent version available. After installation, restart your device once more, connecting with your BlackBerry ID and check if you are able to send BBM to one of these devices.

  Please try it and let us know of your progress.

• BlackBerry Smartphones BB Bold 9900 just does not load

  I bought my BB Bold 9900 10 months and I never had problems charging my battery. But the other day, when I got home and charged, when I woke up, Led - the RED light flashes and custom light up. I used another charger (nine) but still the same. I tried to plug it into my laptop for charging, but still not good. BB office says this device was not connected (since obviously he doesn't have the power). I searched online and I tried the "kickstart" they say where I have to charge my phone for 2 hrs and remove the battery for 10 minutes and put the battery back and wait another 2 hours - still not good . Although when I tried, I saw the icon charge for a few seconds during the first 2 hours, but do not see it again.

  Anyone have a suggestion? Do you want to know if I need to replace my battery or have this problem? We have no Center service BB here in the Philippines. The trader would normally send unit to Singapore to have checked/fixed. I can't afford not to have my phone because of my work and I have files that are stored in...

  I will appreciate any help you guys can give. Thank you.

  In waiting for someone to answer, I did some research and tried them out, but so far, I'm still not able to turn onn/load my camera.

  Here's what I've tried so far:

  1 pull the battery loading and put back on the

  2. the "kickstart" than what a qualified member where in while now the end call key, remove the battery and the light RED LED while that appear and immediately press call button for 3 seconds and press the end button again. He advised to do 7-12 times and told me that does not work the first time... but try again. (I tried to do this several times)

  3. a publication that he had his dependents for like 2 days and removed the battery every 2-3 hours. (did not have my phone which support long however )

  4 force detect the BlackBerry smartphone by using the Application Loader. It was also published in KB10144of Blackberry Knowledge Base.

  FYI: guests of the message I have seems different from what has been published well since I don't have the chance to reinsert the battery. I was prompted to unplug the unit and close the application before installation. After you restart, DM didn't register my device. Did not have the option 'new attempt/Update ".

  (I know it's funny you reply to my own post, but I'm really desperate now.) And hoping that someone must answer, at least you know what I've done so far)

• BlackBerry Smartphones Blackberry Curve 830 not start?

  I have a blackberry curve 8530. It stoped working and wont just power on. I bought a new battery for it and let it charge for about 10 hours. It starts to turn on and start but once the loading bar gets 1/16th of the way in which overloaded it stops and starts again. What is going on? Someone please help me and tell me how I can solve this problem, if I can. Thank you.

  Hi TheresaB96

  Is your PC connected to the Internet while doing this process? If Desktop Software can perform a clean reload, then we can always use the Loader .exe to recharge our device software. Please try this Knowledge Base to Reload your OS device:

  KB29847 BlackBerry Desktop Software is not required to perform a reload of the own of the BlackBerry Smartphone.

   

   

  So first download the OS pack for your device from your carrier's website then use loader.exe. Please try it and let us know the result.

  Prince

  ____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.