View 5.0 - SCOM Management Pack fail?

Similar Questions

• SCOM Management Packs is not compatible with view 4.6?

  I have a problem with the VMWare View for SCOM Management Pack that comes with the login Server 4.6.

  The problem is that the MP does not work with / has not been updated for VMWare View 4.6.

  I was finally able to get the MP to work by changing the key value of ProductVersion Reg 4.6.0.366101 to 4.5 connection view servers.

  See attachment.

  When I changed this value and runs the scripts of discovery followed again launched on of.

  So the question now is that VMWare has updated this MP to work with 4.6.

  I'm trying to change the MP, because I don't want to change the server view.

  Any have any ideas about what happened here, why is it this way, or if I am ignorant some new SCOM pack out there?

  It is a known issue and an article was written for her, but for some reason currently is not marked as public - I'll see if I can find out why and unlock. URL is: http://kb.vmware.com/kb/2001298, it contains a download link for updated management packs be used with 4.6.0 I have attached a copy of this thread.

• Cannot save the Management Pack Configuration in VROPS

  Hello

  We started to experience a strange problem with our new VROPS 6.1 deployment when you try to configure certain management packs.

  We have 3 VrOPs devices deployed, Master, Master Replica and collector remote monitoring 3 standard vSphere (2 vRealize and a NSX) deployed using VMware cluster more practices and are working well. We had some problems with our vSAN where we lost a large amount of data because of a corrupted data store which meant losing our vCenter cluster Resource and Management 2 devices. Our vROPS / /vRA of the PSC devices / instances were fine as they were running on other storage. We had to re-bulid our vCenter but now have everything back running as expected.

  However... We started to add the vRA and SCOM management packs in vROPS which works well and sets up very well... but then something strange happening after about 5 minutes of data collection... the Configuration of each of the vRA and adapters SCOM disappears... And data collection stops. For more visit, it seems that someone has gone and remove the configuration of the adapter, but this isn't the case, because no one else has access to this environment.

  In any case, now when we try to re - configure an instance / configuration of an adapter we can not save the configuration of the card after we successfully test the connection we get this strange message that I have attached a screenshot in this post.

  The message reads the following:

  1. Unable to create the resource to HAVE it. Resource with the same key already exists.

  We have tried to remove the packs management, PAK re - install and replace the existing, but it does not work we always get the same error when trying to save.

  We are not now able to save the configuration of the vRA or SCOM adapters... and I'm a bit puzzled. Any help would be greatly appreciated.

  Hello

  I had similar problem. Which user are you logged as? There is a problem with the user rights and management packs. Only the local administrator users must be used, try to connect to this account and see if your configuration is not there already (such as msg of error States).

• Microsoft System Center Operations Manager Pack for vmware view?

  According to the link below, there is a vmware view management pack available for MS operations manager:

  http://blogs.VMware.com/view-point/2010/08/view-45-modernizing-the-Windows-desktop.html

  Where can I download this? I was not able to find it in the download portal.

  This package is actually available on the login server view itself once you have it installed.

  Information on integration with SCOM is found beginning on page 51 of the Guide found here VMware View integration:

  http://www.VMware.com/PDF/view45_integration_guide.PDF

  -Mike

• Install on the new instance of SCOM 2012 Dell management packs, questions...

  I was given a task to install SCOM 2012 to monitor a lot of servers, including Dell.  Problem that I am running is when I try to install the Dell Management Pack, it keeps asking me for the Dell device to support COM + user/pass.  I put in the account to use us to access these machines, but it does not work.  I tried a few other user/pass, but nothing seems to work.  I'm really new to Dell servers (first time I'm doing business with them) so not sure what is the problem.  I can't find the good research to find a solution to this problem.

  Can anyone offer some advice?

  I apologize in advance if I forget something obvious.

  Hello

  To extract members without providing identification of the AD information, you can run the Setup program on your desktop computer / laptop (no Windows Server version). The credentials of the AD are required for the configuration of a DLL, which is necessary for servers using WS - MAN (called Out-Of-Band followed in the product documentation).

  Hope that this unlocks and allows you to proceed with your installation.

  Concerning

  Thomas

  PS I work for Dell MP development team.

  If you have more questions focus on the MP, for a faster response, please report it on http://en.community.dell.com/techcenter/systems-management/f/4670.aspx (the forum integrations with Microsoft SCCM and SCOM OpenManage )

• How to view/export Management pack granted granted/no data OEM?

  I see in OEM 11 g how can I view the report "Management Pack access" under the "reports" section to see what targets have enabled/granted management packs and those who are not. It's a nice matrix, but where is this data actually stored? Is there a view? I wish I could export it.
  
  
  I found the following link but has been unable to glean information from him.
  
  | http://docs.Oracle.com/CD/B19306_01/license.102/b14199/options.htm#CIHGFIAF]
  
  Thanks for any help there ' All can provide.

  Salvation;

  "" For your question, I suggest farm your thread here that change the status of the thread to answered and move it to Forum Home "business management" Enterprise Manager which is dedicated OEM forum site.

  Respect of
  HELIOS

• Software support for the Dell Management Pack Suite - Dell VRTX SNMP monitoring

  Hi-

  Anyone know where I can get the support for the continuation of the Dell Management Pack - Dell Poweredge SNMP monitoring in SCOM VRTX?

  Thank you

  Hello

  Please visit our Dell Tech Wiki Page for more information on Dell Server Management Pack and forum for your comments and observations.

  Thank you

  Srinivas Carlos.

• Management Pack for vCloud Director (vROps) connection problem / authentication adapter?

  Hello

  I'm trying to configure the Management Pack for vCloud Director (Cloud Management Marketplace |) Solution Exchange) and I seem to be having trouble with the simplest thing. I have the Solution installed and configured for most, but for some reason usually reach out and join the vCD server, or have a kind of authentication problems. When I test the map with appropriate powers (local and LDAP in vCD), I get the error:

  Cannot establish a connection on the target system. Logon failed! using Host = < FQDN > User = < adminuser > @System

  The adapter puts the @System after him, or is this something so simple, that I'm more thinking than he. I'd be happy to post any kind of newspapers if needed, let me know what you need.

  Thanks a ton!

  You HAVE to put @system, as it should work with or without. the base public REST API URL is assigned within vCloud Director? See the manual page, installation 28...

  Have you checked for ports Firewall open between the machine virtual analytical and vCloud Director host?

• SOA Management Pack more in OEM Gridd 10.2.0.5 for Soa Suite 11g

  Howdy,
  I'm trying to figure out if SOA Management Pack Plus in OEM Gridd 10.2.0.5 provides a view into BPEL Process Manager in SOA 11 g.
  
  I have this working against a SOA Suite 10.1.3.4 Environment Management Pack run on Oracle Application Server. In this configuration, I configured Gridd OEM to discover BPEL PROCESS MANAGER. With this work, I can enter different details on BPEL processes such as status, configuration and performance.
  
  Now I have a new environment - WebLogic Suite with SOA 11 g in there. I discovered in OEM Gridd WebLogic Server. However, I'm not able to discover the BPEL Process Manager. I'm starting to think the process that worked for SOA 10 g does not apply in SOA 11 g and there is not a coorisponding hook in the SOA 11 g of Gridd OEM BPEL process.
  
  If none of this makes sense and you have some information about this so I had to appricate it.

  I think that you want to monitor SOA Suite 11 g running on WebLogic.
  SOA suite 11 g is not certified with 10205.

  SOA suite 11 g BPEL PM part of SOA-INFRA which is a unified runtime platform
  for BPEL/mediator/rules etc. Also the BPEL process is packaged in SOA Composites that are consistent
  with architecture of the SCA

• Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

  Hi all

  I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

  This is the code:

  Tell application "Mail".

  theMessages set of selection

  Repeat with thisMessage in theMessages

  the value of the theAttachments attached to a letter of thisMessage

  Repeat with thisAttachment in theAttachments

  the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

  Save thisAttachment in file theAttachmentFileName

  end repeat

  end repeat

  tell the end

  
  

  The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

  The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

  Any help would be greatly appreciated.

  Kind regards

  Beem

  If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

  Try

  game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

  on error - file does not exist

  return Beep 3

  end try

  say application "Mail".

  activate

  the value theMessages to the selection

  Repeat with thisMessage in theMessages

  thisMessage Open

  say application 'System events' to say process "Mail".

  click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

  Repeat until sheet 1 window 1 is

  end Repeat

  key sequence "o" using { control down,shift down}

  key sequence "Nutty".

  click on button 'Save' of the sheet 1 of window 1

  Repeat while sheet 1 window 1 is

  end Repeat

  key sequence 'w', using {control down} - close this message

  end say

  end Repeat

  end say

• I can not view my complete Task Manager

  I can't view my complete Task Manager. My task manager only show process, that other manues are missing him, how to solve the problem of race?

  Using an Internet search engine:
  http://www.Google.com/search?q=missing+tabs+in+Task+Manager+in+Windows+XP

  Example of success:
  http://www.winxptutor.com/Taskmgr.htm

  Microsoft article:
  http://support.Microsoft.com/kb/314227

• Isass.EXE - Security Accounts Manager initialization failed OXC0000001 to start Windows XP

  Original title: Isass. EXE-SYSTEM ERROR MESSAGE IS ON AN ANOTHER COMPUTER & WON "T START.

  This is the error message when I turn on computer ISASS. EXE-system error Security Accounts Manager... Intialzation failed due to the following error: a device attached to the system is not fuctioning - OXC0000001 error status

  Jacqui T Hi,.

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  This problem may occur if the file Security Accounts Manager (SAM) is damaged or missing.

  Step 1: You can follow the steps mentioned in the article below

  Error message "Security Accounts Manager initialization failed" when you start Windows XP

  http://support.Microsoft.com/kb/316751

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boot Manager Windows fails error 0xc000041c

  original title: laptop CRASH

  I HAVE A LAPTOP TOSHIBA SATELLITE THAT BROKE DOWN.  BOOT MANAGER WINDOWS fails to START, WITH AN ERROR CODE OF Oxc000014c, a FILE of the REGISTRY SYSTEM IS MISSING OR DAMAGED.  IS THERE A POSSIBLE SOLUTION.  I DON'T HAVE MY WINDOWS INSTALLATION DISC.

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Managed Server failed with error libOvd

  Dear Experts,

  I have cluster with 6 Managed server environment configured in Machine 3. Machine has Admin and 2 Managed Server, Machine B has 2 Managed Server and Machine 3 has 2 Managed server. Recently, I have restarted all the managed server. The server managed on computer A another start that all servers are STATE of shows like "FAILED_NOT_REACHABLE". After that, I refer to the journal it shows the message below

  
  

  Log file:
  

  " The Managed server fails to start with this error: "JPS-02592: item"PoolCleanupinterval"could not send ldap configuration data to libOvd for the instance of service 'identity.ldap' in the context of JPS '..." "" not planned "

  The managed server fails to start with this error: "JPS-02592: failed to chase ldap config data to libOvd for instance 'identity.ldap' service in the context of JPS '..." "element" maxPoolConnectionIdleTime' does not wait

  For this issue, I refer doc oracle (Doc ID 1999999.1) . but this doc not provide patch for OAM managed server for custom weblogic. I recently installed 11g Oracle HTTP Server in the path of Middleware in the Admin of Machine (Machine A)

  Is this Cause Oracle HTTP Server problem? If it means, but I installed the HTTP server on the Server Admin not on Machine B and C, because the server could not start Machine B and C.

  Is this bug?. Can I use this patch for the normal weblogic instead of OAM managed server

  Note: I have weblogic version 10.3.6.

  This cause a major problem. Please give suggestions.

  Kind regards

  Ove.

  Hi Florent.

  My hypothesis is correct. After that I installed webtier on Machine A (Server Admin), it changes some files in the Ovdlib in the House of Middleware does level not the domain level. If the Remote Machine B and C of the Machine does not have this change so that the servers in the remote computer does not start. After that I installed the webtier on machine B and C changes that happened in the Machine B and C.Then servers managed in the Machine B and C are started... Thanks for your help;

  Kind regards

  Ove.

• Oracle Application Management Pack for Oracle E-Business Suite Guide 12.1.0.4.0?

  Hello fellow pioneers OEM.

  I am trying to locate the Oracle Application Management Pack for Oracle E-Business Suite Guide 12.1.0.4.0

  
  

  I have a beautiful SR but still no answer on that of the analyst. Thank you.

  DA

  Currently the latest version of MPA is 12.1.0.3.0