SOA Management Pack more in OEM Gridd 10.2.0.5 for Soa Suite 11g

Similar Questions

• Error so that the Installation of SOA SUITE 11g

  Hello
  
  I install SOA SUITE 11g on Oracle Linux 4.
  I have already installed the Oracle 11 g database
  I installed the Weblogic 10.3 Server
  
  I checked the oracle database, I am able to run it successfully.
  I checked weblogic server as well, its too running successfully.
  
  I opened a server session as * 'oracle' user * and trying to launch runInstaller from command prompt
  
  
  the trace of error is produced is lower. Please let me know where I am doing mistake.
  I'm new to SOA SUITE n related technologies...
  
  
  [++[Oracle@localhost ~] $ cd SOA_SUITE / Disk1 ++
  ++[Oracle@localhost Disk1] $ ls ++
  ++ doc install setup.exe stage runInstaller ++
  ++[Oracle@localhost Disk1] $. / runInstaller ++
  ++ From Oracle Universal Installer... ++
  
  ++ Checking if CPU speed is above 300 MHz. 1992 actual MHz Passed ++
  ++ Verification space Temp: must be greater than 150 MB. MB real 233511 spent ++
  ++ Checking swap space: must be greater than 500 MB. Real 5023 MB spent ++
  ++ Control monitor: must be configured to display at least 256 colors ++
  ++ > > > Could not execute auto check for display colors using command/usr/X11R6/bin/xdpyinfo(1). Check if the DISPLAY variable is set. Failure of < < < < ++
  
  ++ Some requirement checks failed. You must meet these conditions before ++
  
  ++ installation, ++
  
  ++ Continue? (y/n) [n] y ++
  
  
  ++ > > > Ignoring required prior failures. Continuing... ++
  ++ Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-02-23_05-49-23 PM. Please wait... ++
  ++ Please specify JRE/JDK (Ex./home/jre), < location > location/bin/java must exist: ++
  
  ++ Please specify a valid JRE/JDK location: /root/Oracle/Middleware/jdk160_14_R27.6.5-32++
  
  ++ Please specify a valid JRE/JDK location: ++
  
  
  I'm giving the JRE/JDK location that I had when I was installing weblogic server, but its not to accept that, and I'm
  "Please specify a valid JRE/JDK location:"message again. "
  
  
  Please let me know how I can I get out of this error.
  
  Thank you
  
  Vishnu kumar

  Hello
  check for spaces or a character that could happen even if you specify the location of the JRE, you can also call runInstaller with
  i.e; have - jreLoc, the path in the cmd.

  . / runInstaller - jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32

  that should work.

  Kind regards
  Jitendra

• Identity Management Pack more

  Can someone tell me if there is a new version 11g R2 for Identity Management Pack Plus. I could not find the downloads

  The most recent identity management is available via https://edelivery.oracle.com

  For info: http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/oid-11gr2-2104316.html

  ~ J

• Installation of SOA Suite 11g

  Hello

  I am an oracle applications developer and want to learn how SOA. I would like to install SOA suite 11 g on my computer laptop windows 7, but I read an article on apps2fusion.com, saying it would slow down terribly and may even corrupt Windows operating system files.

  Is that true and if so, how install it safely without any mess. This could be a basis of SB, but I couldn't find a good online documentation. Any help would be greatly appreciated.

  Thank you.

  
  

  I wouldn't worry about installing corrupt Windows operating system files.  However, it will definitely slow down your PC.  If you are looking for a facility that won't affect your ability to use Windows, I download Oracle virtual box install an OS in VirtualBox and then install SOA Suite in the VirtualBox.  This will allow you to 'fork' more soa and all of its components still active as the database, when you do not need.

  Once you have downloaded virtualBox, install your operating system preferred in it.  If you are using Windows 7 and you want it to be the OS used inside VirtualBox, you will need a special touch to it.  However, there are a multitude of free Linux variant. My favorite is CentOS.

  Once you have installed an operating system in VB Oracle, so go ahead and download the appropriate files to install SOA Suite.  Please note that SOA suite installation locally requires the installation of Weblogic, a local database Oracle (the database single user works fine), as well as the installation of the entire suite SOA. In addition, you'll also probably want to download and install SOAPUi which is a great tool to test service endpoints.

  To get all this to work properly, you will need a lot of RAM.  Currently, my Toolbox (running on Windows 7 Pro, not in VB Oracle) can use (including the total operating system) up to 5.5 GB.  For the above configuration, I would suggest that this amount is available for your VirtualBox and more whatever your OS needs on the host system.

  Alternatively, if you install the largest components (Weblogic and the database) on a server, you can simply use in your tests.

  Please let me know if that helps.

• Oracle BPM 10gR 3-Oracle SOA Suite 11g

  I'm not sure that some body else already asked.
  
  I produced Oracle BPM in production which is fine and happy with the way it works. Its developed from Version: 10.3.1.0.0 build: 100364 #. We use custom JSP, JavaComponent, etc. GRANDPA in this.
  
  We are thinking of migrating to SOA to Oracle 11g Suite.
  
  Is there any tool for that? If this isn't the case, nothing provided for?
  
  Do we need to re - write our application BPM from 10 g to 11 g? What all parties might need to re - write?

  To answer your question in the right way, I fear that there is no direct migration path of OBPM 10 g to Oracle SOA Suite 11 g. You will need to write to us - many things like

  1. the present of the BPM API are not public. If u will be something like GRANDPA as OBPM
  2. There is no support for PBL/Java in Oracle 11 g BPM. However, if you want to use the custom Java component you can use BPEL or spring with BPM. After all, each component is packed inside a single composite.
  3. it is recommended to have all of the dashboards and UI user developed with ADF if you are with Oracle SOA Suite 11 g but even if you have a JSP that shouldn't be a problem.

  This topic has been discussed a few days in this forum. You can find the thread here

  Business case to move from Oracle BPM from 10.3 g to BPM11g

• SOA Suite 11g includes the OSB?

  What is the difference between OSB and BSE.
  BSE is a component of the SOA Suite and it can connect to various services.
  OSB has more functions such as dynamic routing and enrichment of the Message. If I buy just SOA suite, can I use OSB? Or I have to buy OSB if I want to use it in my application that contains the components of SOA.

  I think with the permit SOA suite 11 g, you can use the OSB. No need to buy it separately. You can view-

  Difference between BSE and aqualogic service bus
  What are the differences between BSE 10 g and 10g of OSB
  More SOA and differences of OSB

  Kind regards
  Anuj

• SOA Suite 10g and SOA Suite 11g? What are the major changes in these two?

  Hi Experts,
  I'd be curious to know about Soa Suite 11 g. SOA Suite 10 g SOA Suite 11 g, BPEL changes? What are the major changes in these two product/tool wise? Is now OSB belongs to Soa Suite 11 g? It would be useful for us to know what are the major changes and updates or changes came to 11g.
  
  Please share this valuable information.
  
  Is it that no matter what version is still running Oracle, which has not yet officially launched with oracle?

  Hello

  I think that the most important changes are:
  1. move on Weblogic Server.
  2. creation of a unified period. Which means that everything plugs into it. SOA, BPM, OSB, B2B...

  Additional features like the NDA: Composites within network-based event. SDO: Service Data Objects to transfer information and from db, adf (if I'm not mistaken)
  Tighter integration with the ADF.

  A few extensions to BPEL. Such as the events of Signal etc. Don't know if it's standard or specific to Oracle extension.

  But you get the idea. A lot of changes, a lot of things improved and move functionality.

  For more information:
  http://www.Oracle.com/technetwork/middleware/soasuite/Overview/index.html
  For 11g PS1: http://www.oracle.com/technetwork/middleware/soasuite/soa-11gr1-ps1-new-features-096000.html
  For 11g PS2: http://www.oracle.com/technetwork/middleware/soasuite/soa-11gr1-ps2-new-features-097680.html

  I hope this helps.
  Kind regards
  Nils

• Size of the table space increases too quickly (DEV_MDS of soa suite 11g)

  I use Oracle 11g SOASuite.
  
  We are facing a problem of database (table space). After each schema deployment that dev_mds increases of 40 MB. We are therefore very often our processes in the development stage. and while cancellation of the deployment of the process. Ideally the memory should be freed. but it's not free memory.
  
  Please, help me out of this problem. and it will be appreciated if someone will explain how this schema size increases too quickly.
  
  Thank you

  Whenever you cancel the deployment a composite of a partition in the composite EM console gets also deleted from the MDS store. But since you must keep all versions of your composite, that your MDS store is bound to grow with each deployment.

  As you mentioned that your size of the composite is huge due to activity of embedded java, it's something that your design should be avoided because there is no resuability for your component java embedded in several versions of the same composite or composite.

  If you are wanting to use Java in your BPEL process I recommend to use a resalable composite with a context of spring that you can reference from different composite materials or different versions of the same composite.

  It also gives you an advantage in terms of modularisation your application, because whenever you need to change your composite Java or BPEL, they can be changed and deployed independently.

• Installation of SOA Suite 11 g - creation of schemas

  Hello
  
  I installed the Weblogic 10.3.1 server. Downloaded Oracle SOA Suite 11g.
  
  In the installation guide it says that patterns of the repository must be created first before installing the OFM.
  
  I have two questions.
  
  1. He has provided in the installtion guide "http://www.oracle.com/technology/" link to download rcu.bat. But I do not see this download at this link.
  Could you please tell me where I can get this rcu.bat file?
  
  2. I have Oracle 10 g daabase installed on my system (Vista). Is it necessary to install 11g for 11g SOA Suite installation?
  It has no benefit for BCI if I update to Database 11g?
  
  
  
  Thank you
  Suckers.

  Suckers,
  Suite 11g SOA is certified with Database 10 g (10.2.0.4 and more for EE, SE) and XE 10.2.0.1

  where EA - Enterprise Edition
  SE - Standard edition
  XE - Express Edition

  You can check SOA g 11 steps of the installation here

  http://onlineappsdba.com/index.php/2009/07/08/Oracle-Fusion-Middleware-SOA-Suite-11g-R1-installation/

  Let me know if you need assistance in the installation of database 11g on Vista machine

  Concerning
  Atul Kumar
  http://onlineAppsDBA.com

• Passage of Oracle SOA Suite from 11.1.1.6 to 11.1.1.7

  My Organization put in place of Oracle SOA Suite 11g platform about 1.5 years.  We are running version 11.1.1.6 and have about deployed composite 90.  We use BPEL, Ombudsman and the technology at this time (we are not yet using OSB).

  We intend to improve 11.1.1.6 to 11.1.1.7 soon (not quite ready to make the jump to 12.1.3).  In this context, I understand that we need to upgrade the runtime of SOA Suite environment as our development environment (JDeveloper) 11.1.1.6 to 11.1.1.7.  I am also aware that there are 4 bundle patches, published on top of 11.1.1.7.0 that is us on the application (by Doc ID 1485949.1). 

  I wanted to ask the community of users and see if others have any advice or tips to share in this minor update.  Is it necessary to redeploy existing SOA composite after this upgrade, or are they upgraded 'on site '?

  Appreciate any useful comment,

  Jeremy

  After upgrading to 11.1.1.7, your 11.1.1.6 composites will / should continue its work on time. You don't need to redeploy composites to make them work after upgrade.

  It is recommended to try the upgrade on a test environment and verify that 11.1.1.7 is working fine for you.

• Security in SOA Suite 11 g

  SOA suite 11g has integrated GOSA agents in the SOA infrastructure?

  11 g, Oracle WSM Agent has been integrated into Oracle WebLogic Server. Please see below link for details-

  http://docs.Oracle.com/CD/E15523_01/Web.1111/b32511/intro.htm

  Kind regards
  Anuj

• OSB AND SOA SUITE

  Installation of Oracle Suite does not include the BUS of Service Oracle?
  I installed the pre built image which has following SOA, but cannot find the web resources http://localhost:7021 / sbconsole.
  http://www.Oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
  
  where can I find that installation for the Enterprise Service bus for Oracle if it is not equipped for SOA suite.

  Refer to http://www.slideshare.net/gschmutz/oracle-soa-suite-11g-mediator-vs-oracle-service-bus-osb

  7 to 14 blades should give you details :)

  Thank you
  Patrick

• SOA Suite 11 g on Oracle Application Server 10g

  Hello
  
  I was wondering if anyone knows if this is possible or supported to run SOA Suite on Oracle Application Server 10 g R3?
  
  I couldn't find specific details on the application servers supported for SOA Suite 11 g. The only information I found is to license non - Oracle Application Server and some Oracle advertising indicating details:
  
  "To ensure that customers extract the most value from their existing COMPUTING investments, Oracle SOA Suite 11 g is designed to take care of servers non-Oracle application, including IBM WebSphere, Oracle WebLogic Server, RedHat JBoss and Oracle."
  
  Any information would be appreciated, thanks.

  The latest version of SOA Suite 11g 11.1.1.4.0 (PS3) is certified on Oracle Weblogic Server and IBM WebSphere Server. Please refer here - related certification

  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html

  Version 11.1.1.1.x to free 11.1.1.3.x take on Oracle Weblogic Server only.

  OAS 10 g is not an application server supported for 11g Soa Suite.

  Kind regards
  Anuj

• How to view/export Management pack granted granted/no data OEM?

  I see in OEM 11 g how can I view the report "Management Pack access" under the "reports" section to see what targets have enabled/granted management packs and those who are not. It's a nice matrix, but where is this data actually stored? Is there a view? I wish I could export it.
  
  
  I found the following link but has been unable to glean information from him.
  
  | http://docs.Oracle.com/CD/B19306_01/license.102/b14199/options.htm#CIHGFIAF]
  
  Thanks for any help there ' All can provide.

  Salvation;

  "" For your question, I suggest farm your thread here that change the status of the thread to answered and move it to Forum Home "business management" Enterprise Manager which is dedicated OEM forum site.

  Respect of
  HELIOS

• Software support for the Dell Management Pack Suite - Dell VRTX SNMP monitoring

  Hi-

  Anyone know where I can get the support for the continuation of the Dell Management Pack - Dell Poweredge SNMP monitoring in SCOM VRTX?

  Thank you

  Hello

  Please visit our Dell Tech Wiki Page for more information on Dell Server Management Pack and forum for your comments and observations.

  Thank you

  Srinivas Carlos.