View 6 does not support the 2012 server as a host for the connection to the server operating system

Similar Questions

• VN7 791G - does not start the Windows operating system

  So I got my Acer VN7 - 791 G for 5 months now and until last month, everything was going fine until suddenly, the system has become VERY slow (operating system and programs have been suspended) and the boot process has long redicilously. To exclude a software problem, that I decided to restore the default computer via Acer recovery, hoping that would solve the problem.

  Unfortuantely it's still very slow after a successful reset and all of a sudden one day after a reboot the system decided he did not want to join the opening scene of session windows more and decided to stay on the loading screen Acer or the loading screen 'Prepare auto repair' Acer.

  I decided to leave the system to run to see if it would eventually reach the opening of windows session, but he never did and she now does is continue to stay on the Acer loading screen or gives me a black screen with the mouse pointer (nothing happens if I have nothing at this point (, or if I leave it running). Same thing happens when I try to press Alt + F10, it's just a black screen.

  As it is still under warranty, I intend to ship to the Acer Service, however I read some bad reviews before I do I wanted to see if:

  (a) someone has had the above question on their model, and
  (b) are the comments that I've read about Infoteam Acer repairs without merit?

  Thank you very much.

  Sounds like your hard drive is broken.

• Satellite A135-S4437 does not start the Vista operating system more

  Hello

  I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

  I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

  Thanks in advance for any help!
  PG

  Are you can access BIOS by pressing the ESC key?
  Select this check box.

  But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

  Welcome them

• "Invalid Bundle." "... viewer.app does not support the minimum OS version specified in the Info.plist file"

  I tried to re-construction of the app and it's not helping. The plist has the minimum OS listed as 6.0. I could go and try to change it manually, but then the signature will be invalid. Correct this ASAP.

  We believe that this issue is resolved. Please let me know if you continue to see the problem.

  Neil

• vCenter does not update the guest operating system

  Hello

  using 4.0.0 vCenter and vSphere Client 4.0.0 I changed the flag of the BONE invited "SuSE Linux Enterprise 9/8..." to «SuSE Linux Enterprise 10»...

  I can see the correct indicator in the .vmx file and in the dialog box settings of the virtual machine - also when I connect directly to the ESX host using vSphere Client, I see the flag right in the Summary tab. But vCenter still shows the old value in mode summary VM, also a query against the vCenter Perl API returns an incorrect value.

  Any ideas?

  See you soon

  David

  the information is in the comic book, but if you remove the VM of the inventory and re - add to the inventory which should fix.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• 'webplugin' does not support the maximum safety level of safari plugins

  Last night, I got connected to my Svat security system using Safari and left the computer with the browser showing all the security cameras. Early in the morning about 3 or 04:00 I was awake by restarting the computer I noticed that the OS has been updated.

  For now, I am trying to connect to my security system and Safari can not access the server. I went into properties and noticed the ['webplugin' does not support the maximum safety level of safari plug-ins] my security system stop working in windows because of the plugins for a long time so my only option is to use my mac-mini to access the system and now what happens.

  The name of the plugin in the security system is called HiDVRPlugin.dmg and the system is Svat. I tried to go to Safari preferences and enabling the plugin, but it still does not work.

  Any ideas on how to re activate or difficulty this plugin?

  Thank you

  Go back to an earlier version of Mac OS X is not an option? Or may be using a different browser?

• Media Player error play 3gp: the player might not support the file type or does not support the codec used to compress the file.

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  Windows gives you integrated programs to open the image as png files.

  In Vista, use Windows Photo Gallery to open png files.

  In Windows 7, if you use it, you can use Windows Photo Viewer to open png files.

  If you have installed Windows Live Essentials, you can use Windows live Photo Gallery to open png files.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• "database %s %s does not support the %s in this context" remote database question.

  Hi all

  In the sub query I used the remote database table in the join. If run the table individually, I am able to see the results.

  Everything into account the remote database table to my request, I face the error below.

  I tried to create the view of the table as below

  Error:

  ORA-02070: database is not supported in this context

  02070 00000 - "database %s %s does not support the %s in this context"

  * Cause: The remote database does not support the function named in

  the context in which it is used.

  * Action: Simplify the SQL statement.

  Error on line: 1 column: 516

  Tried to create a point of view doesn't allow:

  ------------

  CREATE or REPLACE FORCE VIEW winq20 as

  Select * from [email protected];

  --------------

  I face the error for the situation.

  1. to join the remote database table to the query.

  2 try to create the view of the table. make the same mistake.

  ----------------------------------------------------------------------------------------------

  Select * from [email protected] a, all_tab_cols b where a.table_name = b.table_name;

  ------------------------------------------------------------------------------------------------

  Need your help for this problem.

  Thank you

  Fabrice

  This could be due to the long type column. try to remove that.

• The destination does not support the EFI firmware.

  Hello

  I have a Debian Linux 7.0 physics I'm P2V using converter 5.5.3.  When I choose my target ESXi server, I like:

  The destination does not support the EFI firmware.

  How confirm/deny, or enable the EFI on my node ESXi support?

  Hello

  This may be a false signal. The problem is that Debian is not a taken GOS supported for the converter. That's why he treats her like "Other Linux" and then the ESXi responds that it does not support the "other Linux" on EFI.

  Unfortunately I see no significant workaround solution. There is a crazy idea - converter checks if the source computer's BIOS or EFI by searching the directory/sys/firmware/efi/vars. If you can somehow it wrong that there is no (I don't know how), it might treat the source such as BIOS and convert it. When this happens, you should then change the VM of destination to EFI firmware and manually create the EFI boot entry somehow.

  Concerning

  Plamen

• Your tv does not support the protection of the content of this program. Replace the cable HDMI TV com

  "Your tv does not support the protection of the content of this program. Replace the hdmi to the TV with component cables cable will allow you to view the program.

  I get this message when you try to watch HBO from Directv. DirecTV said it is because my tv does not support HDCP (I have KDL-46SL140), but it actually does. Anyone else having this problem?

  Hi Tom,

  Welcome to the community of Sony!

  This TV is compatible with HDCP you mentioned. Try the steps mentioned on the page below to resolve this issue:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C387911

  Please indicate the solution as accepted, if you find this information useful.

  Thank you for your message.

• Get this error "The Office does not support the requested protocol display."

  Just built a new environment of view 4.5 and became "The Office does not support the requested protocol display" when trying to use the client to connect through PCOIP, but works very well with RDP... What Miss me?

  Wwill price points righ away.

  When you installed the Agent of 4.5 view you ensure that PCoIP components have been selected?

  -Mike

• "Your host does not support the current settings for comments.

  My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest.  I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale).  I get the following message:

  -

  ---

  Error

  -

  ---

  Connection error: your host does not support the current settings of comments in mode full-screen.  Try to reduce the color depth or resolution of your guest and try again.

  Impossible to enter full screen mode.

  Do you want to retry?

  -

  ---

  Yes No

  -

  ---

  Does perform a work around?

  Thank you

  Alan

  The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.

• Extensions Manager CC does not support the hybrid group of extensions?

  Document adobe® Extension Builder 3.0 release notes ( http://download.macromedia.com/pub/labs/extensionbuilder3/extensionbuilder_releasenotes_06 2413.pdf ) which says " " Extension Manager does not support the hybrid group of extensions"(issue #3549187).  Hmm... Really? Extensions of the hybrid is no longer supported?

  Extension Manager supports hybrid extensions. But we define hybrid as extension: an extension that contains the file mxi, zero, one or more ordinary files and one or more CSXS extensions incorporated. In other words, only CSXS extensions can be incorporated in hybrid extension. If you embed another extension extension or regular hybrid in an extension of the hybrid, it is an invalid extension from the point of view of the extensions Manager.