View chkdsk results
If you plan it chkdsk to run at startup (chkdsk C:/F/R/X/B) tracks like should (I think) but I'm unable to see the last screen before final statistics it's erased vista starts quickly. I can't find a log file. Is there a log or a log is written to disk can I access once Vista starts to view the results of the last run of chkdsk. If this is not the case, can I write a batch file to the "pipes" of chkdsk output in a text file?
Hello illegal in all fifty States.
To view the log Chkdsk , follow these steps:
Open the event log.
Control Panel (Classic view)-> administrative tools-> event (3rd choice) Viewer
The ChkDsk log can be found at...
Windows connects (2nd choice left)-> Application (1st choice subsidiary)
< note="">
A number of newspapers appears in the center pane, many of them since the most recent Windows startup. You will notice the difference in time of 1-2 hours in events if you restarted to analyze (time passing runnign chkdsk). This should help you identify startup events after the scan...
At halfway in the logs list, find the Wininit item in the source column. This will contain the log for the ChkDsk scan data before starting.
Hope this information is helpful
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think.
Tags: Windows
Similar Questions
-
Display filters with a custom view 'No Results'
If I do not create a "No. Results" view, and no data is returned, I get the usual message "the specified criteria result no data. This is often caused by the application of filters... »
In addition, it shows that the filters (based on guest user).
I want to do is use a customized view of "No. Results" that displays the title of the report and has a message that I specify. I know I can do this by creating a view of 'No Results'.
My problem is that the display filters is more if I use my opinion of personal results 'No '.
Is it possible that I can show my 'No Results' opinion AND show that filters also discovered?Without customization, I don't think you can view filter when there is no data to display. So, here's a simple solution, you can do:
1) go to the Advanced tab, and then copy the WHERE clause of your report.
(2) go to the 'No' results show and in the text window, paste the content.
(3) change the text as you wish. (Copy of the WHERE clause saves you from having to type everything in).
Now your filters will be part of your view without results.
-
How to find and view the results in flash
Hello friends,
I work in Flash 8 and using AS 2.0 coding.
I work with failover-page application. Here I have an option 'search '. I'll tell you the scenario.
Here I am loading images/pages dynamically through xml. He loading and works as a page flipping. so far, it has been done. Now if you enter some text inside the search option and press, he must search all loaded images/pages and view pages resulted.
How this feature is indeed. How to find the jpg with a given string?
Your help will be really appreciated.
Kind regards
Rajesh
You must have a database of information related to the pages. If the pages are only jpeg images, then they will not be able to provide you with anything in the way of useful data searchable beyond possibly titles image. So, you will need to create a database that contains all of the information in these pages that you can have your (matching chain) diagram of function search works with to find matching information.
-
Error when trying to view the results of the latency
Hello
After a successful (including downloading are finished) I din't get any result of latency in the web INTERFACE
When I look at the viewplanner.log I see the following error:
tail-f viewplanner.log
File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
() defer.maybeDeferred(function,_*args).addErrback
-< exception that is caught here >-
File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
result = f (* args, * kw)
File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
File "mysql_interface.py", line 554, in getTestAverages
exceptions. IndexError: list index out of range
When I run the script report.pyc only I got the following error:
[root@viewplanner ViewPlanner] # python report.pyc t 'load-view' m distance
Writes raw data to the file: load - view.dat
Report.Pyc: no iterations is stabilized to be marked. Could not generate the report.
I applied the fix mentioned in the thread http://communities.vmware.com/thread/423015
Any ideas?
Best regards, Christian
The perfcounter nickname is not enabled in the vmx file. Shut down the virtual computer, add the entry of perfctr such vmx file as specified in the user guide and the error will disappear.
-
Displays the name of the report in the view 'no result '.
Hi guys,.
It's 10.1.3.4.1
In the * 'No result' view *: is it possible to retrieve and display the name of responses dynamically?
I found two sons:
Do not change the default value, no results text
http://forums.Oracle.com/forums/thread.jspa?MessageID=8312398 & #8312398
Show the title of the report (header) when no results
http://forums.Oracle.com/forums/thread.jspa?MessageID=4575238 & #4575238
but these solutions require customization on a per report basis, and the name of the application must be hardcoded.
Ideally, I would like to have something like:
' Not found for report < script type = "text/javascript" > print report.name < /script > '
I can actually put in the noresults.xml file, which would affect all applications that include the display 'no result '. Replace the section of scorecard or hard code them the name of the application in the results not seen is not easy to manage.
Any ideas or recommendations?
Thank you, best regards.
Alex. -.Hi Alex,
Ideally, I would like to have something like:
' Not found for report '
First thing is seen results no. He's not accepting the "HTML/JavaScript", so we cannot reach the above syntax
Second... There is no option available in results view dynamic name no.
You can do this for the title, but as you say manual labor he's be there
Thank you
Angelique Varanasi -
Some how I did something inadvertently and the window results disappeared... when I do a modification, validation etc... I can't see the results window. I tried to go down and catch the edge, but this appears at the bottom. I can not find the results of anywhere!
Ideas, any help would be greatly appreciated.
PS. I tried to reinstall the program, but that has not changed anything either.Have you tried view > (Shift + Ctrl + L) results?
-
AppleScript to save the text from the view of results
Hello, I am working with applescript that takes the results in the window at the bottom of the editor, like this
Now I try to write it in the text editor as a text but Applescript say that he can not with "can't turn"class IFAP in the text.
and if I try to save the results as a list, applescript supports error 10000 (textEdit has encountered an error: failure AppleEvent written in popup)
It's that everybody knew how can I solve this problem?
Here is the text of the script, but it won't work on your mac because it uses application to imagine Photo.
thisFile to Choose file with guest "choose an image file:
say application "Imagine the Photo.
the value thisImporter for import graphics thisFile
if the component error of thisImporter is not equal to 0 then
thisImporter close
display the dialog box "Not an image file that quicktime recognizes."
return
end if
the value {x, y, xDim, yDim} to the limits natural of thisImporter
define thisDocument to make new document window properties {size: {xDim, yDim}}
the value the destination of thisImporter to thisDocument drawing
thisImporter trace
thisImporter close
-The section which follows should be replaced according to the pixel value class
the value pixelValueRect to {x, y, xDim, yDim}
the value pixelValues1 to get the pixel values of thisDocument with properties {class of pixel values:pixel in the rectangle, rectangle boundaries: pixelValueRect}
thisDocument close
-class (pixel points) as a list
-' class pCol' as a list - цвета координаты разнесены по классам с именами, приводим к списку и
end say
say application "TextEdit".
activate
make a new document
the value text of document 1 to pixelValues1 as list
-the text of the document 1 pixelValues1 as a value list
-Save the document 1 in ' / Users/IMac/Desktop/LastUpdate.txt '.
end say
pixelValues1
-
Chkdsk results with areas defective 320 kb
can I repair bad sectors
Gerry C J Cornel - a regular contributor here and I quote:
Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER.
Make sure you include the spaces indicated.
Enter Y when asked if you want to run chkdsk on restart the computer.
Quit and then restart the computer.
Marking bad sectors on a hard disk takes time so be patient.
Delimiting does not repair a defective sector.
He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.
If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk.
If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.
However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.
If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER.
Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided.
If you want a report on a partition or one drive other than C, you need to go to this partition.
To access F, where F is the required partition you type F: and press the ENTER key.
UTC/GMT is 19:28 31 May 2012
-
ADF Mobile | to view the results in a table
Hi allI use Jdeveloper with ADF Mobile 11.1.2.4.39.64.62 extensions 11.1.2.4
I must displya quesry results in the form of a table (I'm developing of application for tablets and iPads).
I don't see any compont to Datacontrols table to remove it as a table on page amx.
Is it possible that I can display the data in a table in ADF Mobile?
Help, please.
Thank you
Vieira
Hi Vinay,
Yes, I understand that the table showing in the window is not the best, but we develop this for the cushions and with highest 7-inch screen tablets.
I am able to achieve by droping inside the Table list item > row > component cell Format.
Don't you see the disadvantages of this approach?
Thank you
Vieira
-
View the results of a slider control
HI, I'm suggling on this pl/sql, because I just started learning a few weeks ago. Basically what this pl/sql is check
in my article "the time" to see if any time is not in the current time format and if it finds one it should display only and then someone can go and check.
Firstly this my_table has 3 different columns which makes it the primary key, so I need display the columns so that the administrator can find the
incorrect data easily in the time column.
These 3 columns that actually the primary key are 'sid', "setid" and "sentry".
I have created a slider and possesses the top loop to check all the my_table data but I do not know how to dmbs_output
all results at once. In the results, I need to display all the columns in key primary and thus 3 under and this column that the data is.
IF SQLCODE =-01858
THEN
Dbms_output.put_line (-);
Can someone help me please. Here are my codes
DECLARE
v_result varchar2 (4000);
v_key1 varchar2 (10 byte);
whole v_key2;
whole v_key3;
cursor c_get_times
is
SELECT sid, setid, Sentinel, time FROM my_table;
c_get_times_row c_get_times % ROWTYPE;
BEGIN
TIMES a c_get_times LOOP
v_key1: = times.sid;
v_key2: = times.setid;
v_key3: = times.sentry;
SELECT TO_DATE (times.time, "HH24") IN v_result FROM my_table;
END LOOP;
OPEN c_get_times.
LOOP
EXTRACT the c_get_times in c_get_times_row;
EXIT WHEN c_get_times % NOTFOUND;
END LOOP;
EXCEPTION
WHILE OTHERS
THEN
IF SQLCODE =-01858
THEN
Dbms_output.put_line ();
ELSIF SQLCODE =-01851
THEN
Dbms_output.put_line ('invalid value for minutes");
ON THE OTHER
Dbms_output.put_line (' failed with another unknown error: ' |) SQLERRM);
END IF;
END;
If you can create the object in your schema, create the function below and the race below query it will give a correct result. I think that's the test objective you ask, otherwise do not use DBMS_OUTPUT. Just create the function and run the select statement.
FUNCTION to CREATE or REPLACE date_chk (p_value VARCHAR2, VARCHAR2 p_format)
RETURN NUMBER
AS
v_val1 NUMBER (10);
T_DATE DATE;
BEGIN
T_DATE: = TO_DATE (p_value, p_format);
RETURN 1;
EXCEPTION
WHILE OTHERS THEN
IF SQLCODE =-01858 THEN
RETURN 0;
END IF;
END;
SELECT the sid,
SetID,
Sentinel,
timeval
OF test_time
WHERE date_chk(timeval,'HH24:MI') = 0;
-
View the results by unique identifier
Dear community,
I failed on something I do not know how to understand.
What I want is a page that contains a blank report and a LOV. When I choose something from the LOV (which is a primary key), the empty report should be filled with stored information / related to the selection of LOV.
As possible. because I could not find or have examples for this.
Explanation:
I have a 1 page.
I have a region 1 page.
I have a report on page 1.
I have a LOV element on page 1.
Selection of items LOV is pressed the report must be completed with tabledata lov selection-related.
Thank you!"What I need on page 1, is I want all results by student.
I thought it could be done by having 1 LOV and a report based on a table (this report automatically shows all the data in the table, which is not a real problem).
"But when I select a student out of the LOV, the report should update only the results of the student."Let's say your agenda of the LOV page called P1_STUDENT and your primary key on the table column is STUDENT_ID.
Your request would be
Select column1, 2, 3,.... FROM Student_Table WHERE STUDENT_ID = :P1_STUDENT OR :P1_STUDENT IS NULL This is where your "select list item fits into the query's Where Clause"
So, following the previous tips to have your LOV P1_STUDENT point send the page when it is modified by the user, your report runs and data will be selected based on its new value and new details of the report will be generated.
-OR: P1_STUDENT IS NULL - allows the report to initially run and select all lines for all students ID's
-
How to hide the Rev column. Classic view search results
Please help any idea on the customization of the display classic search result page to hide columns "Rev."
Thanks cordially
Srinath.Then go back the same document listed previously and look for "noRevisionsColumn" instead.
-
Score &; view the results of a form submission
To http://theforrestproject.org/petitionform.html , I created a petition that sends the form to my email account successfully. But I also said on the same shape as the total number of results by country and by State can be found on the bottom of the page.
Anyone would please give me clues as to how this could be done?
I was able to copy the corresponding code from anywhere?
I use CS3 and I am an old man, so please, be gentle.
Any advice on this subject would be sincerely appreciated.
Thank you, Ian Malik.
If your server is windows-based, you would normally use ASP and MS SQL server, not PHP/MySQL. But how many answers you anticipate? If it's under the 1000 or so there would be much less active match them manually and update the web page manually. Or find someone ready to configure for you who codes ASP. The script that processes your form of petition is PHP. It is certainly possible for PHP on a windows server, but not a MySQL database.
Another thing, your site you say that encryption is provided for the processing of the forms, but it is not provided by the SSL Protocol (secure socket layer). The script gdform.php crypt the data when it is sent to you? And then your e-mail off sales client? If you are not convinced that the process of form is secure, so you should probably not say anything on this subject. If you went on the road to the database, then you WOULD secure your form of disinfection and validation of the data before it goes into the databsase (but SSL is not necessary for the data that you collect).
-
two in the drop-down menus - find - view the results
Hi anyone tell me the best way to do the above in the Toolbox of the developer. That is to say have two drop downs say select in 'space' and 'employment' and then displays the results...
Thank you
Richard
I´ll send you a private message, as I Don t think that this problem can be solved in just to look at a few screenshots guess what else could unfold ;-)
See you soon,.
Günter
-
How can I view my results in dynamic text.
I need to display the results in my flash program. The results are great to work in a trace. I get the text, but not the results of high1.lab, high2.lab and high3.lab.
status_txt. Text = ' \nAnd here are the top 3 of these categories:';
'1.' + high1.lab;
"2" + high2.lab; ".
"3." + high3.lab; ".There are different ways to address the issue, so here's a few...
status_txt. Text = ' \nAnd here are the top 3 of these categories: \n1. "+ high1.lab +" \n2. '+ high2.lab + ". \n3" + high3.lab;
or
status_txt. Text = "\nAnd here are the top 3 of these categories: ';
status_txt. AppendText ("\n1." + high1.lab);
status_txt. AppendText ("\n2." + high2.lab);
status_txt. AppendText ("\n3." + high3.lab);
Maybe you are looking for
-
Satellite 210cs does not illuminate.
I recently met an old 210cs satellite, the first time I turned it on I got an incorrect checksum. Then tried again and after a quick memory check, Windows 95 starts.Had the laptop down for about 5 minutes then it turns off, tried again the next day a
-
Dell laptop, running in circles, 3 3 download updates
IM using an Inspiron 1525 Dell w / 4G of ram, Vista Home OS, app a month after the windows SP2 update, my computer is stuck in a cycle of trying to boot, would show 3 Configuration 3 publishes 0% do not power off or unplug your computer, he would be
-
How can I enable the Active Desktop on & off?
My old sytem had Windows ME who had an active office. Now I have Vista and I said you can enable active desktop on and outside, but so far I can not even find the active desktop anywhere on my PC even doing a search, you can see my problem by going t
-
Am I missing it or can someone tell me why Dell does not offer SSDS with their systems?
-
How to get the device Versions of OS on the device
Hello I'm trying to get the exact device of the OS versions, I get as below 07-30 12:39:31.842: I/System.out(76509407): HEIGHT720 07-30 12:39:31.888: I/System.out(76509407): HI--2 07-30 12:39:31.896: I/System.out(76509407): Device Software Version is