Display filters with a custom view 'No Results'

Similar Questions

• COM Surrogate crashes when displaying photos with Windows Photo Viewer

  Hello

  I'm on Windows 7 64 bit Home Premium edition and recently the Windows Photo Viewer crashes COM Surrogate error everytime I try to see the pictures on my laptop. I tried Windows Fix It and the DEP exclusion method (cannot exclude 64 bit executables) but not to prevail. Thanks in advance.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DllHost.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bca54
  Fault Module name: igdumd64.dll
  Fault Module Version: 8.15.10.2653
  Timestamp of Module error: 4f3aac44
  Exception code: c0000005
  Exception offset: 000000000030eb06
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 17417
  Information additional 1:6061
  More information 2: 6061b80d6a9bd094028d252cfed54efd
  3 more information: 2fa2
  Additional information 4: 2fa266993017bb32dca12f9ce8d78f67

  Hello

  Have you tried the steps in my previous post?

  Also, you try the following steps:

  I suggest to create a new user account and see if the problem still occurs, follow the link below:

  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, try and fix follow him corrupt user account the below mentioned link:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• Unable to connect with the customer to view

  Hello

  I can connect to my first machine winXP with rdp, but the customer view told me that there is a connection error (error http, status = 400). In the "server connection", I used my ESX host's IP address.

  What does poorly or describing what it takes to make this work?

  Thank you very much

  Malta

  Sorry, just to clarify, the connection to the server is a Windows Server (may be virtual) who has the login server software installed. It's in its web interface that you configure all the settings for your desktops, your pools of desktop computers and users or groups have the right to use them. Although view uses rdp to connect protocol client to view isn't just a remote desktop client.

  You also need the view-agent installed in the virtual desktop machine, you want to connect.

  Once you point the client to connect to the server, it displays all the virtual desktop that took the user with that right you authenticated. The administrator is not automatically or the right to use any desktop PC, you must manually set the rights.

• Settings RDP with the customer to view.

  Hi all.

  Is it possible to change the RDP with the customer to display settings (resolution, colors,...) as the RDP of Windows client as it allows? View Client has just 2 options (port connection and SSL or not) by default.

  Thanks in advance.

  Sincerely,

  Jean-Philippe

  Yes you can do it.

  You can use the standard GPO in the ad and you'll find ADM files on the Server View Manager: C:\Program Files\VMware\View Manager\Extras\GPO

  Blog: http://communities.vmware.com/blogs/dommermuth

• Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  I've just updated to Sierra. Since the upgrade did several reboots. When I discover an app the side also shows "4 +" or similar and I click on the note to view reviews and ratings of customer, a blank screen appears. Everyone knows this or have a way to solve this problem?

  I see even here in Seattle, so I think the question is about the end of Apple.

  By the end of 2012 Mac minis, macOS?  Watch 38 mm silver AL, watchOS 3; iPad 2 Air & iPhone 6 + iOS 10.0.1;  Apple Airport Express

• Display a message to the user w / result of data

  Howdy,

  First off it is a mission of the College work and it's especially complete; seeking advice and the experience here.  The mission is to create a calculator with many functions for each method of arithmetic.  It was easy enough, but the next step is to display a message to the user after each calculation.  For example, if the problem was 4 + 2, the message must be "the result of the addition is: 6. the creation of the part of the message by using the Msg to display the user-defined function is simple, but it is not exactly struck home.  I want to create a message that contains the result of the problem (for example 6).  As it is now I can't do that with the function of Msg, or if it is possible I can not quite understand.  I want to have a separate message for each function, but I don't know if I can incorporate the response into the message.  It's the underlying objective; How to integrate the response in a message dialog box to the user? If it is possible what should I watch?

  The VI himself is quite simple; case of structure for each arithmetic function and a certain time for execution loop.  X and there are entries and a drop-down list to select a structure if necessary. I've attached a screen below.

  Thank you

  

  THA

  You can use the Message to display to the user to view any string to the user. If the key is to use the palette of the chain to manipulate strings to get the error message.

  A subpalette of the palette of the chain is the range of number/String Conversion. This can help you get your (6) value into a string format and then you can concatenate that string however wished with the message.

  With the pop-up windows, you must make sure that you're not trigger this popup with every single loop, so make sure you put a case around the pop-up structure and place the logic in there to make it work only the case of popup when the value changes.

• How the customer views initiates the connection to the broker?

  Only the customer view to connect directly to the time the broker for connections and for the desktop is always the case in View 5?  Can someone explain the process?  Points will be awarded for all responses, thanks!

  The client initiates the connection http with ssl (port 443) to make the initial connection and authentication.

  The user then selects a pool of offices, depended on its installation traffic how each tunnel by the broker for the connections (Security Server) on the desktop.

  Depends on if the display protocol is RDP or PCoIP or it will be on port 3389 4172 but they can both be in the tunnel if the connection to the server or directly on the desktop.

  Linjo

• Display blank lines instead of 'No message result' of OBIEE 11.1.1.7.1

  Hi all

  I need to display an empty table instead of no results message. I use OBIEE 11.1.1.7.1.

  Answer as soon as possible.

  Thank you.

  Hello..

  You can do...

  1. run the analysis that shows data in Internet Explorer

  2. press F12 to view the source code of this page.

  3. identify the code for this particular table

  Who could look like this;

  CALENDAR_YEAR

  AMOUNT_SOLD

  CALENDAR_YEAR

  http://pdudhane-D01:7001/Analytics/RES/s_blafp/viewui/pivot/sort_plc.png">

  http://pdudhane-D01:7001/Analytics/RES/s_blafp/viewui/pivot/sort_plc.png">

  AMOUNT_SOLD

  

  http://PD01:7001/Analytics/RES/s_blafp/viewui/pivot/sort_plc.png">

  0

  0

  0

  0

  0

  0

  0

  0

  0

  4. turn 0 where it shows the values of fact

  5. don't insert the code in the properties of the analysis of change no result parameter and the personal messege...

  You can see the table and the columns with the values 0 for no data.

  Thank you

• AppleScript to save the text from the view of results

  Hello, I am working with applescript that takes the results in the window at the bottom of the editor, like this

  

  Now I try to write it in the text editor as a text but Applescript say that he can not with "can't turn"class IFAP in the text.

  

  and if I try to save the results as a list, applescript supports error 10000 (textEdit has encountered an error: failure AppleEvent written in popup)

  

  It's that everybody knew how can I solve this problem?

  Here is the text of the script, but it won't work on your mac because it uses application to imagine Photo.

  thisFile to Choose file with guest "choose an image file:

  say application "Imagine the Photo.

  the value thisImporter for import graphics thisFile

  if the component error of thisImporter is not equal to 0 then

  thisImporter close

  display the dialog box "Not an image file that quicktime recognizes."

  return

  end if

  the value {x, y, xDim, yDim} to the limits natural of thisImporter

  define thisDocument to make new document window properties {size: {xDim, yDim}}

  the value the destination of thisImporter to thisDocument drawing

  thisImporter trace

  thisImporter close

  -The section which follows should be replaced according to the pixel value class

  the value pixelValueRect to {x, y, xDim, yDim}

  the value pixelValues1 to get the pixel values of thisDocument with properties {class of pixel values:pixel in the rectangle, rectangle boundaries: pixelValueRect}

  thisDocument close

  -class (pixel points) as a list

  -' class pCol' as a list - цвета координаты разнесены по классам с именами, приводим к списку и

  end say

  say application "TextEdit".

  activate

  make a new document

  the value text of document 1 to pixelValues1 as list

  -the text of the document 1 pixelValues1 as a value list

  -Save the document 1 in ' / Users/IMac/Desktop/LastUpdate.txt '.

  end say

  pixelValues1

• I have a power shot sx HS 40 & need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.

• How can I remove selected Custom view (s) of the event viewer Console tree?

  I looked at the MMC Help on create and manage custom views.

  I can't find a way to remove the custom filter views in the Console tree, which can be found on the left side of the event viewer.

  How can I remove selected Custom view (s) when they serve no more values?

  Problem solved

  I asked this question because I was unable to see what was going on in the event viewer and I couldn't find help in mmc HTML Help. However, now I see what's happening and I can give you a solution to my own question.

  Cause

  If I connect to the computer as a user with administrator privileges, I am able to use the event viewer to create a custom view filter that can be used by all users who have access to the event viewer. If I fix remove a view filter custom Console tree, I can't delete it unless I'm logged in as the user who created it.

  Solution

  1. Log the computer as the user who created the custom view.
  2. Start Event Viewer
  3. Use the right-click of the mouse on a custom view filter selected in the Console tree, open the drop down menu.
  4. Delete appears fourth in the bottom of the menu if and only if you are logged on as the user who created this view.
  5. Select Remove to remove the filter to custom view.

  If Delete does not appear in the drop-down menu, then it may not possible you connect as the user who created the custom view.

• My Explorer no longer displays this sidebar making the viewing of files and folders very heavy.

  Normally, Windows Explorer shows a side bar on the left side of the screen with a list of the places and on the right is a window showing the contents of any location is highlighted. My Explorer no longer displays this sidebar making the viewing of files and folders very heavy. Anyone know how I can get back the sidebar?

  Original title: display Windows Explorer

  Open Explorer

  -Layout - click on "Navigation Pane"

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• Query to display data with total

  Hi team,

  I have the whee requirement I need to display data with total and the total general.

  Examples of data include:

  with t as 
  (select 'chris' nm , 10 no ,'FT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('05/02/2014','mm/dd/yyyy') dt , 2456 sal, 10 days , 50 intrst ,55 intrs1 ,60 intrs2 from dual
  union all
  select 'chris' nm , 10 no ,'FT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('06/10/2014','mm/dd/yyyy') dt , 1000 sal, 30 days , 50 intrst ,55 intrs1 ,60 intrs2 from dual
  union all
  select 'chris' nm , 10 no ,'FT' Emplmt, 'PF' ProFund , 'NonReg' Status ,to_Date ('06/10/2014','mm/dd/yyyy') dt , 20 sal, -5 days , 1 intrst ,1 intrs1 ,1 intrs2 from dual
  union all
  select 'john' nm , 11 no ,'PT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('05/02/2014','mm/dd/yyyy') dt , 1153 sal, 10 days , 50 intrst ,55 intrs1 ,60 intrs2 from dual
  union all
  select 'john' nm , 11 no ,'PT' Emplmt, 'PF' ProFund , 'Reg' Status ,to_Date ('05/16/2014','mm/dd/yyyy') dt , 1000 sal, 8 days , 40 intrst ,45 intrs1 ,50 intrs2 from dual
  )
  select * from t 
  

  Need the output like below format

  Chris FT 10 PF Reg 02/05/2014 2456 10 50 55 60

  Chris FT 10 Reg 10/06/2014 1000 PF 30 50 55 60

  Chris 10 FT PF NonReg 10/06/2014 20 - 5 1 1 1

  5456 35 101 111 121 subtotal

  John PT PF Reg 02/05/2014 1153 11 10 50 55 60

  John PT Reg 16/05/2014 1000 PF 11 8 40 45 50

  2153 18 90 100 110 subtotal

  7609 total 53 191 211 231

  Could you please give some thought to get the result as above.

  Thank you!

  something like this:

  with t as (select "chris" nm, 10 no, "Pi" Emplmt, "PF" ProFund "Reg" Status, to_Date (May 2, 2014 "," mm/dd/yyyy") dt, 2456 sal, 10 days, 50 intrst, intrs1 55 intrs2 60 double)

  Union of all the

  Select "chris" nm, 10 no, "Pi" Emplmt, "PF" ProFund "Reg" Status, to_Date (June 10, 2014 "," mm/dd/yyyy") dt, intrst 50, intrs1 55, 1000 sal, 30 days, 60 intrs2 of the double

  Union of all the

  Select "chris" nm, 10 no, "Pi" Emplmt, ProFund "PF", "NonReg" State, to_Date (June 10, 2014 "," mm/dd/yyyy") dt, 20 sal,-5 days, 1 intrst, 1 intrs1, 1 intrs2 of the double

  Union of all the

  Select "Jean" nm, 11 no, "PT" Emplmt, "PF" ProFund "Reg" Status, to_Date (May 2, 2014 "," mm/dd/yyyy") dt, 1153 sal, 10 days, 50 intrst, intrs1 55 intrs2 60 double

  Union of all the

  Select "Jean" nm, 11 no, "PT" Emplmt, "PF" ProFund "Reg" Status, to_Date (16 may 2014 "," mm/dd/yyyy") dt, 1000 sal, 8 days, intrst 40, 45 intrs1, 50 intrs2 of the double

  )

  SELECT decode (REUNION (nm), 1, 'Total', decode (grouping (State), 1, "partial": nm, nm)) nm

  , no, emplmt, profund, status, dt, sum (sal), sum (days), sum (intrst), sum (intrs1), sum (intrs2)

  T

  Rollup Group (nm, (no, emplmt, profund, status, dt));

  HTH

• Manager certificates 're-record of lstool' failed: 1 / VCSA Certificate Manager Option 1: certificate to replace Machine SSL with certificate custom

  As a result of this post...

  Configuration of VMware vSphere 6.0 CA VMware as a subordinate certification authority

  .. .we have now installed a brand-new VCSA. This is a clean install.

  "In accordance with the recommendation of support, I am now trying to do ' Option 1: certificate to replace Machine SSL with certificate custom" using a Microsoft CA

  This is the error message:

  2016 07-13 T 15: 24:25.268Z of INFORMATION serial number of the certificate manager before replacement: < redacted >

  2016 07-13 T 15: 24:25.268Z of INFORMATION: < redacted Certificate Manager after replacement serial number >

  2016 07-13 T 15: 24:25.268Z INFO-Certificate Manager footprint before replacement:< redacted >

  2016 07-13 T 15: 24:25.268Z INFO-Certificate Manager footprint after replacement:< redacted >

  2016 07-13 T 15: 24:25.268Z certificate MACHINE_SSL_CERT certificate INFORMATION-Manager replaced successfully. Serial number and the fingerprint has changed.

  2016 07-13 T 15: 24:44.90Z ERROR-certificate error when replacing Manager machine SSL Cert, please visit /var/log/vmware/vmcad/certificate-manager.log for more information.

  2016 07-13 T 15: 24:44.91Z "lstool record" has no certificate ERROR Manager: 1

  A pension case is ongoing. But if someone has any ideas?

  <>rant

  It is incredibly frustrating that something (replacement of a SSL certificate) that should be so simple is so hard.

  It's extremely annoying to know that the Certificate Manager is able to completely screw up a VCSA.

  How VMware is justified in the marketing of this new approach ver.6 as a 'simplification' of the management of SSL certificates?

  < / end of rant >

  Thank you

  Robert

  This has been fixed by an Incident of Support VMware

  I don't know how to fix them, but it took over 2 days (except "waiting for a response" time)