View CSM?

Similar Questions

• FWSM syslogs are not displayed in the event 4.1 CSM Viewer

  I have MSC 4.1 the observer of events and it should now support FWSM syslogs. The FWSM context now appears as device monitored the event viewer and I can see that the system receives the syslogs (the capture of packets on the server).

  But they are not displayed? Why?

  Rgds.

  Which version is the FWSM performer?

  You can use the event viewer with FWSM running software versions 3.1.17+, 3.2.17+, 4.0.10 + and + 4.1.1 only.

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• CSM 4.2

  Hi Netpros,

  I am to evaluate the software eval of CSM 4.2 90 days. I installed and deployed on a VM environment and turns on a regular basis. I am facing

  a small question by discovering a few firewalls. Cisco ASA firewall are discovered and receive events in the event viewer. But I'm unable to receive

  all events for 8 PIX worm devices. However, all devices are discovered. Advice or hints of a popular person.

  Concerning

  Faiz

  Sorry, but the CSM 4.2 supports event not with Pix Firewall. Please see the following where this is documented:

  http://www.Cisco.com/en/us/docs/security/security_management/cisco_security_manager/security_manager/4.2/compatibility/information/csmsd420.html

• To test if the CSM 4.3 installation is good

  Hello world

  Just installed the MCS 4.3 server software.

  I have 5 icons on desktop.

  How can I test if the installation is good?

  Mahesh

  Decide whether to use workflows or in mode without workflow and management or non-ticket ticket management mode. Change the Configuration Manager server preferences accordingly. (Tools, Security Manager Administration, and then select the options accordingly. Most of the facilities of low or little-mono-user require not either of these modes.)

  Import a couple of firewall in configuration manager. Look at their configurations and analyze their sets of rules of access list.

  Change them to send their syslog on the CSM server messages. Make sure the event are visible in the event viewer.

  Once you have some data as reference point (i.e. a few days after the implementation of the foregoing), look at your devices in monitor performance and health.

• Is it really possible to return signatures IPS of CSM

  Hi people,

  I tried to return IPS signatures that I deployed through policies of the Signature of the CSM to the old version, but it doesn't seem to work. Against this Cisco CSM guide says:

  If you decide that you don't want to apply an update of the signature, you can return to the

  last update by selecting the political level Signatures on the device, by clicking on the view

  Update level button, then click on restore

  I can't imagine that it is possible that the signatures are normally compiled into xml files. How the sensor would he?

  Eugene

  When installing a copy of the files that will be replaced or updated during the installation is copied to a backup directory.

  The CLI has a "downgrade" command that can uninstall the update and backup copies will be used to replace the removed files.

  A few things to know:

  (1) old configuration will be copied back. If the changes made since the update may be lost.

  (2) this only works for Signature and engine updates. Service Packs, minor updates and major updates replace the full operating system, so there is too much data to make backup copies.

  (3) this only works for the update installed. Once you have decommissioned the more recent, you cannot downgrade the earlier.

  (4) this can be done through CLI and now also available in MSC.

  Here are some things to check for in your situation where it seems to not work.

  Log on to the sensor and run 'display the worm '.

  History in the output of 'see the worm' shows a package of Signature Update as the last installed update?

  If it is then either an another downgrade was already completed, or Major Update, minor update, or Service Pack has been installed the last packet and cannot be downgraded.

  If it cannot be done through CSM you could try the CLI' "downgrade" command and see if it works through the CLI or if the CLI gives you an error and the explanation.

• question on the EMI and CSM

  Hello

  I installed IME to a server to manage the network IPS of 6500 package, and I would like to install on the same MCS server to manage the same Catalyst 6500 FWSM. I have several questions:

  -Can I have installed and running in the server IME and CSM sane?

  -CSM contain the same features EMI and much more?, I mean, that's enough with the CSM to manage FWSM and IDS-2 network of 6500 modules?

  -Do the MSC provides a better view of the FWSM newspapers than other applications? Which is the best tool to view the logs of the FWSM, I want to say is a tool like view newspaper checkpoint for FWSM?

  -My client has 2 Catalyst 6500 and 1 installed in each 6500 FWSM, two FWSM mode active/pasive redundancy, I consume 1 or 2 licenses of CSM?

  Thank you

  Kind regards

  Juan Luis.

  Hi Juan,

  - Can I have installed and running in the sane server IME and CSM?

  Yes.

  - Does CSM contain the same functionality of IME and more?, I mean, it is enough with CSM to manage FWSM and IDS-2 network modules of 6500?

  EMI offers various functions such as archiving and image management and implementation at level automatically and taking automatic backups, etc.

  - Does CSM provide a better view of FWSM logs than other applications?. Which is the better tool to view the logs of FWSM, I mean is there a tool like checkpoint log view for FWSM?

  CSM 4.0 is a tool that allows to display, filter, grep etc syslogs of all firewalls and IDSes.

  - My customer has 2 catalyst 6500 and 1 FWSM installed in each 6500, both FWSM running in redundancy active/pasive mode, do I consume 1 or 2 licences of CSM?

  CSM will be manage and watch one active unit only. The day before will just be a copy of the asset. So 1 license for CSM.

  I hope it answers your questions.

  PK

• IPS of CSM 4.3 update

  Hello

  I'm trying to download updates cisco.com using CSM (version 4.3) IPS, but it does not work. It was working fine all along until he stopped two days ago. I checked that the server can connect to the internet without any problem. I can use the same credentials from cisco for manual updates and also works perfect.

  confirm settings of setti CSM, all still intact. reconfigured details and still the same issue. I get the following error

  "Unable to communicate with the service locator to retrieve files available.

  Note that I have just same crendentials on my LAB IP addresses and did the automatic update of the installation and it worked fine.

  any idea what the problem might be?

  Kind regards

  There is a new workaround for CSCue16970solution, based on the addition of the certificate to the MCS server.

  1.) Manually download Cybertrust's CA certificate from https://www.cybertrust.ne.jp/SureServer/file/root_ca/BCTRoot.txt . 2.) Save this file as 'trusted.998.crt' in text format and ensure that no extra characters or new lines are added to the original content. Keep in mind that certain Web browsers may add HTML codes when saving text files, so be sure to edit them out. 3.) Exit/close any/all instances of CSM client applications (Configuration Manager, Event Viewer, Health and Performance Monitor, Report Manager, etc.) 4.) On the CSM server, stop the 'Cisco Security Manager Daemon Manager' service by issuing the following command: 'net stop CRMDmgtd'. 5.) On the CSM server, copy the 'trusted.998.crt' file to the 'CSCOpx\MDC\Apache\conf\ssl' directory. 6.) On the CSM server, start the 'Cisco Security Manager Daemon Manager' service by issuing the following command: 'net start CRMDmgtd'. 

• CSM and existing VPN tunnels

  I ran into an issue in the past. When you install the CSM for the first time in an environment where there is an existing VPN network, the product will not reflect existing VPN tunnels in the map view.

  I tried to import existing configurations using all means possible (to leave RDC, from text in my computer files or simply to find) but CSM doesn? t seem to fall under the existing configuration to view these pipes to the card. Looks like you have to build WHC otherwise they will not show.

  Someone at - he found a way to make this possible? Is this really possible? There is another technology that MSC will not pick up from an existing configuration?

  I understand that this may not be a problem given that the MSC is a policy management solution and not a follow-up, but it would be nice to be able to continue to add tunnels with CSM of a work in progress.

  I have? He's appreciate any input on this.

  What version of CSM do you use?

  Have you tried discovered vpn?

  If you are using CSM3.1, then you can discover the vpn and therefore be able to see the tunnel vpn for the card too.

  HTH,

  Radhika

• materialized view, I need a brief explanation

  materialized view, I need a brief explanation

  A view is a stored SQL statement. When you query a view as select * from v1, result sets are calculated run time. So it's going to be a little slow because it is like issuing an SQL statement complex to build the view. But it is always the data in real time.

  While a materialized view contains the results of the sql statement on which it was built. If recovery will be faster but the data is not real-time and the MV must be updated manually.

  V slow response - does not occupy space - real-time results

  Quick response MV - occupies a space - non-real time results

  Kind regards
  CSM

• I have several new emails in the Inbox, but I'm unable to view or even see them?

  I have several new emails in the Inbox, but I'm unable to view or even see them?

  Hey CRB123,

  Thank you for being a part of the communities of Apple Support.

  If I understand your message, you see a badge that you have unread e-mails in your Inbox, but they are not appearing.  An easy way to separate the emails read from the unread macOS that Sierra is to click the button to filter in the list of messages, or sort by unread:
  

  • Activate the filters: Click the filter button at the top of the list of messages, click unread to display the list of available filters, and then select one or more filters. A check mark indicates a filter is active.

    

    If you use more than one email account in Mail, you can filter the Inbox into account - for example, only show emails from your iCloud account.

  • Disable an active filter: Click on the filter.

  • Disable all filters: Click the filter button .

    Mail remembers your filters and automatically applied the next time that you click the filter button to activate the filters.

  You can also sort the list of messages - just click on "sort by" at the top of the list of messages, then select an attribute, such as and a sort order. In a typical configuration, click on a column header.

  Mail for Mac: filter the list of messages in Mail

  If no unread messages, then I would like to confirm if you have emails unread looking webmail for your email account. If you see the unread messages in webmail, go back to the mail app, and then rebuild your Inbox:
  

  You may have to re-create a mailbox to update the list of the messages it contains. For example, if messages seem to be missing or garbled, or if you don't find any relevant messages when you search by using the entire Message search option.

  • Select a mailbox in the Mail sidebar, then choose BALL > rebuild.

  When you rebuild the mailbox for accountIMAP or Exchange messages and attachments stored on your computer are discarded and then downloaded again from the mail server to your Mac. Your mailbox is empty until the download is complete.

  Mail for Mac: rebuild the mailboxes

  Take care.

• latesy update cannot view emails

  I can't view any of my emails after the last update. I press the real email and all I get is a white screen.

  Hi angiefromstrathmore,

  Thanks for posting in the Community Support from Apple. I understand that your email shows a white screen on your iPhone. I use email frequently and can understand how this could be a drawback, so I'm happy to help you.

  You can go to settings > mail > Threading and disable full Threads. This should get your mail operational return.

  Take care.

• The list view in the Playlists of music

  As a DJ, I rely on iTunes for my music catalogue and allow me to get the best information on each song as quickly as possible. We chose all likely what parts of the ID3 tags, we want our vision of library to display...

  but in the Playlists of music, it doesn't seem to be a way to change this info is displayed. I need to be able to see the Album, Bitrate and comments in my Playlists of music... not just title/length/artist/Genre/year...

  If anyone has found a solution to this let me know... or I ask Apple to allow us to display our playlists just like we would songs within our library...

  When your reading list is open, go to view > view > songs.

  That should fix it.

• How to view the queue up next with the new IOS 10?

  I made the mistake to get the iPhone 7 which still has the update ios 10 (update worse!) and I don't know how to do something! I managed to find out how to add songs to my next up but I have no way to see them or rearrange them. If someone knows how to see, I'd highly appreciate management!

  Hi kaleighjade,

  I understand that you're looking to see what is next, as well as reamnenagement of the rails in the list on your new iPhone 7. In order to so, once you have something to play in the app music, tap the MiniPlayer (bottom) to display the now playing screen. From there you can drag up to see what's next and rearrange the order of the songs listed there.
  

  Control playback. Tap a song to play and show the MiniPlayer. Tap the MiniPlayer to display the now playing screen, where you can do the following:

  • Press on to move to the next song.

  • Press on to return at the beginning of the song.

  • Double click to play the previous song in an album or a playlist.

  

  Go to any point in a song. Drag the playback slider.

  Share music. Press on , then press Share piece.

  Shuffle. Glisser slide upward, then press on to play your songs in a random order. Tap again to turn off random playback.

  When you view the contents of a playlist or album, click Shuffle all.

  Repeat steps. Glisser slide upward, then press on to repeat an album or a playlist. Double click to repeat one piece.

  Add the song to your library. Tap .

  See the lyrics. Drag until you see words, and then press Show to see. Press Hide to hide.

  More. Press on for additional options.

  See what's next. Swipe up. Tap a song to play and the songs that follow. Drag to rearrange the list.

  iPhone user Guide - play music
  http://help.Apple.com/iPhone/10/

• Need to navigate to a pdf file, view/print it.

  In accordance with the subject line, I browse a folder, open a pdf file, view it (no need to edit) and then print it on a wifi printer. If I need a 3rd party app to do this, then please suggest a slight.

  Thank you very much.

  Look at Acrobat Reader.

  https://iTunes.Apple.com/us/app/Adobe-Acrobat-Reader-view/id469337564?Mt=8

• Slide view

  Hello everyone...

  I have been using my iPad 12.9 pro for a while now, and I have a question about the slide mode, which I really hope you can help me.

  I wanted to be able to choose what applications are indicated on this side bar (View Slide Bar), since there are many applications that are shown here that I have no use for. Friends, autocad, bandsintown are a few examples of it. I wanted to keep it there just the apps that I REALLY want to use, and I find it annoying that I have to scroll through a lot of apps just to find the one I need.

  If I'm lazy, let me know, but I think it would be a good idea to put only the ones you need right?

  Thanks in advance

  Rodrigo

  Hello. It's a good idea, and you can inform Apple here https://www.apple.com/feedback/ipad.html. However, it may require a fairly major overhaul of internal interfaces, so don't expect a quick change.