To test if the CSM 4.3 installation is good

Similar Questions

• Ease of Installation App for a test on the device

  App is ready and tested on the Simulator and the device. Bar the file is signed and ready to be tested by our client.

  Is there an easy way for our clients (non-technical users) can install and test the application on their PlayBook?

  We need to tell them to download the SDK software and install it using the command line? It seems a really complicated way for our customers to test the app (and it must be tested by them before submitting them to the App World). I was told there is no OTA way similar to how the apk files are installed on Android.

  How everyone do that? You tell your customers to download the SDK? If so, are there docs online that show the easy steps on how to do it?

  Here is a zip file that contains all the files required along with a batch file simple for the loading of the unit.

  You just need to unzip and place the baf file in the same directory and type:

  password pbdeploy appname.bar ipaddress

  EDIT *.

  The user will also have the JRE installed on their PC.

• Install Windows 8 on external drive Thunderbolt - Windows could not prepare the computer to begin the next phase of installation

  Hi all

  I'm at my wit's end trying to install windows 8. Let me start at the beginning: I used to have windows running on my Mac Pro ssd internal 8.1, installed via bootcamp. It worked well for a while, and then refused to start, gives me a blue screen KERNEL_SECURITY_CHECK_FAILURE. Despite some advice from lonely T, I was unable to fix and ended up wiping the partition and relocation, again via bootcamp. Yet once again, it worked for a few months, then the same problem. I made this one last time, and it only lasted 2 days... So I gave bootcamp.

  I think that the hybrid MBR partition scheme that implements bootcamp is the culprit, but I don't really have evidence to substantiate this claim. In any case, I tried to install windows in EFI mode. (If I understand correctly, the hybrid MBR is set up to allow windows to install in legacy BIOS mode, but that windows 8 may now install efi, which supports my Mac Pro mode.) My Mac is the new Mac Pro (end of 2013, trash in shape), and I can say short UEFI 2.0 (I have the latest efi update from apple installed).

  The method I'm trying:

  1. create a new partition in HFS + on my external drive using disk utility. The drive has now it's efi partition and partition empty 750Go I want to install windows a 1.25 TB storage partition that I use with my mac. It has a GPT. I formatted HFS + and no FAT, because I think that disk utility creates the same hybrid-MBR as training camp every time a FAT partition is created.

  2. use gdisk to confirm that the disc does not have a hybrid-MBR. (sudo/dev/disk1 gdisk watch MBR: protection)

  3 restart my mac and hold the possibility to put in place to bring up the boot efi menu.

  4. Select the EFI_Boot DVD icon (that's the windows 8 install dvd that I have in my superdrive USB drive)

  5. go in the menus of the disk selection screen installation and delete the partition in HFS +, I created to install windows on (the format option is not available)

  6. now select "Unallocated space" on the good drive and click Next.

  The problem:

  Partitioning seems to go ok (there is no feedback on this basis, but it proceeds to the next screen, and all new partitions expected are there if I check diskutil list later). He said it is "copy of windows files", but then stops with the error "Windows has no prepare the computer to start the next phase of the installation." To install Windows, restart the installation. "If I restart, I can start the same process all over again and get the same result.

  The Question:

  How I get this error and get windows install?

  Extra pieces:

  • The first time it happened I assumed it was the new sip / thing "without roots" in El Capitan, causing problems, then I disabled, but I still get the same error.
  • After reviewing the diskutil list output after one of installs it without success, I found that a labeled EFI partition has been created after my storage partition (the original efi partition was still there in the upper part of the disc).
  • I have windows 8.1 installed now bootcamp on my internal ssd. It was planned to use it and winToUSB to put windows on my crush, but I found that it only works with usb2. I do not have installed could cause problems with the installation on another disk.
  • Before say you I can't run windows on an external, yes you can, and many people have. I read windows sees thunderbolt internal disks.
  • I read a few other posts on this and other sites on this problem, but could not find a pertitnant solution to my situation. I found one that suggested to remove the efi on my disk partition, but that seemed like a bad idea, so I didn't try.
  • I write this at 1 in the morning after a day spent in front of the computer trying to get this working, so please excuse typos typing or other. I am pleased to provide you with any pertinant information helping you will help me.
  • Thank you!

  The other thing I tried also almost succeeded:

  Although I prefer to get the method above works, because it seems the most promising, is something else, I've tried that I thought worth mentioning. If you offer advice pertaining to this method rather than the above, I would appreciate it if you could explicitly declare that at the top of your answer. Thank you.
  

  I tried to install windows on the physical disk using vmware and virtual box. The instrutctions I followed for this can be found here: http://www.andrewsavory.com/blog/2011/2156 (the only thing different, it's because it's on an external drive, I created the Fat 32 partition manually using disk utility). The first time (using vmware) installation seems to go off without a hitch, but I couldn't get my computer to see the windows partition as bootable with the boot efi menu hold-option regular refined or with system preferences-> startup disk. I think that I was using always inadvertently a hybrid-MBR at this stage. I tried to repeat this new beginning with the first two steps above to avoid the hybrid-MBR. But now when I try to create the virtual machine based on the gross vmdk, it starts to copy the files then says not sufficient permissions and fails. I don't know if it's a permission with the disk or the hard problem. I tried chmod 777 and chown $USER of the vmdk disk (/ dev/disk1s3) does not.

  Wow, that was a long post...

  1. when a second drive is detected by the Windows Setup program, he wants to create his own brand of EFI (104 MB) and not to mess with the Mac EFI (200 MB). You can force it to use the EFI to the Mac using Diskpart commands.

  2 instead of HFS/FAT32, create a piece of 750 GB free space and it should only get a new MSR/MSD, without the part of EFI.

  3. on your VM method, the link you have is quite old. You have a MP 2013, with references to the 2010 Mac alumni and is a bit too archaic to be useful. http://forums.macrumors.com/threads/install-a-Windows-7-partition-on-Mac-OSX-Wit hout-optical-car-or - usb.1836959 / #post... seems to work for many and can be useful for a test. It also uses Winclone.

  4. you can also try http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .

• OfficeJet 6600 Gets the message of Network Installation fails when you try to install

  Hello

  I have the worst time setting up my new printer wireless Officejet 6600. I work with a wireless-N router that was purchased less than a year ago. I have other wireless products that work well with the internet, so I do not see there is a connectivity problem.

  The test of the printer indicates that everything is OK:

  Wireless on - PASS
  Wireless - PASS work
  Signal quality - very good
  Connected - PASS

  etc, etc.

  I ran through all the troubleshooting I can find and nothing works. I have disabled the firewall, unplugged my router and modem, disconnected the printer, tried to implement on its own IP address. The installation wizard finds her and tries to implement, but I only get the message that it was a "network installation without success.

  Has anyone experience this problem?

  Any new ideas on troubleshooting are welcome.

  Thank you
  Liz

  Hello

  Thank you for your comments. I didn't expect such a quick response, which was great.

  I move the printer to get a signal 'excellent' and tried the other steps you listed.  Through some googling more, we discovered that we needed to do the following:

  Go to the control panel

  Select Printers and faxes

  Right click and select Properties

  Select the Ports section

  Add the port to the IP address of the printer displays

  Not sure if this is the ideal way, but of course, it worked and I am now a happy customer. Hope it helps someone. I'll still Bravo for having responded so quickly.

  Thanks again!

• U2715H, black flashing, disable the CSM in the bios

  * What operating system? Windows 10
  * Which video card? Gainward GTX 1060 6 GB
  * Video card driver version? Last Nvidia
  * Which ports are available for the video card? Several
  * Which video output from the video card port video on the port monitor do you use? DP > CDM
  * What cable are you using to set the video card to the monitor? DP > CDM
  * What Windows power plan? High Performance
  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. What is not? 2560x1440p
  * Has been the monitor purchased from Dell or a reseller? Amazon.de

  You can see the issue here

  www.YouTube.com/watch

  Gainward Gtx 1060 6 GB, i5 3570 k OECD 4.2 GHz, 16 GB of DDR3 RAM, Z77 Pro4, XFX Core Edition 650W 80 +.
  Monitors: Dell U2715H, Asus MX239

  Since the upgrade from GTX 660 > 1060 sometimes my U2715H Dell (1440 p) don't seem to be getting through DisplayPort signal when connected to my new GTX 1060 and starts "flashing" black. During this time I don't see anything about, the menu of the monitor even because it is completely black. This does not always happen, during boot that can't not what I thought, but when Windows loading sometimes starts, it becomes completely back until I have swap around the cables and inputs. However my other monitor connected with HDMI seems not at all affected while the other is flashes, there no CDM or DP to test with that. So I have a flashing monitor and the other being completely affected by it.

  This happens only with miniDisplayPort and DisplayPort so far, I've tried all 3 inputs on GPU and CDM and DP on monitor. This question was not present with my previous MSI GTX 660 Twin Frozr, he also only CDM. When you use HDMI it seems to be normal without blinking, but I need to test again because it does not always happen. Changing resolution does not help. Allows to close the monitor for a few minutes, but it can happen again. Tried to use DDU 3 times to fix without success so far. I guess it's the driver or the GPU, doubt it's the monitor because it worked fine on previous GPU. Any ideas?

  Fixed it by disabling the CSM in the BIOS. Been very well for 5 days, he became black once today, but has resumed normal again.

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• I bought the version of illustrator, installs all OK but when I get to pour Acceptor and pour the launching program... nothing happens and the acceptance window comes up.

  I bought the version of illustrator, installs all OK but when I get to pour Acceptor and pour the launching program... nothing happens and the acceptance window comes up.

  Valoucb,

  If it please try to close the following processes and restart the Illustrator application (as an administrator if you are using windows).

  • CreativeCloud
  • Adobe CEF Helper"
  • Service Office of Adobe
  • AdobeIPCBroker
  • Creative cloud
  • Installation of Adobe
  • AdobeUpdateDaemon
  • AdobeServiceInstaller
  • AAM Update notify
  • CCLibrary
  • node
  • The basic clock
  • All other Adobe applications.

  Please make sure that you are connected to creative cloud with your ID (which has got subscription) correct Adobe and I suggest you to check: cannot launch Adobe Creative Cloud app test to check the permissions on the required folder and try to reinstall the applications.

  In case you need help, please share the screenshot of the message and the version of the OS, so that we can help you properly.

• Another scenario of test - isolate the recovery Site

  Question for the gurus out there:

  Installation: We have a simple configuration with a single restore site protected and unique. The configuration of the network is stretched VLAN. All the tests to bubble networks works as advertised, and we are very pleased with the solution so far. In addition to virtual infrastructure, there is a certain physical systems that make up the environment, and the goal is to make a complete failure on the test of the site in the coming weeks.

  Test case: the proposed solution is to drop the link between sites protected-recovery and turn the entire failover datacenter in a bubble (only accessible through VPN links). Once the test is completed, we would have back then all the changes on the recovering site, so that it protects once more the main site.

  Question: Would it be possible to rotate part SRM to the test in 'Test' mode only - that she set up the whole environment attached to the VLAN direct (who are now isolated from production by dropping the link of the site) and once finished, reset the recovery by the normal site (i.e. "Test recovery finished, press on continue clean...") ») ? I don't see why it wouldn't work, unless for some reason, the test procedure requires communication between the sites that the effective recovery process does not.

  Thanks for any comments.

  Hello

  Recovery test requires no connection to the protected site as far as I know.

  About the networking part of your question, when you change a recovery plan, on the network management screen you have an option to configure the test networks. These networks is used during the trial instead of bubble networks (default).

  SRM will be cleaning the virtual environment, but how do you cleaning physical servers?

  For how long you plan to run on the recovering site? You have sufficient capacity for snapshots on your storage array?

  Michael.

• Error occurs when applying the patch 9239089 pre-installation tasks

  Error occurs when the application of pre-installation tasks of patch 9239089
  
  ----------------------------------Pre-install Tasks--------------------------------------
  4. use SQL * more to run the script:
  
  UNIX:
  $ sqlplus/nolog
  SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql < name of the APPS schema >
  
  ----------------------------------error message---------------------------------------
  
  End of creation of Package PL/SQL AD_DBMS_METADATA.
  
  DECLARE
  *
  ERROR on line 1:
  ORA-20000: ORA-00933: SQL command not properly endedError in
  ad_grants. Give_grants
  ORA-06512: at line 685
  
  
  
  Validation complete.
  
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  Thank you
  Jackie

  Jackie,

  $ sqlplus/nolog
  SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql

  You must run the script as follows (replace with apps):

  SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql apps
  

  Thank you
  Hussein

• Installation of macOS Sierra results in the error message "load installer has no signature verification.

  I tried to do a clean install of Sierra several times and each time Setup reaches the end and then displays the message "the responsibility of the installer has no signature verification. This leaves the computer without a bootable Mac OS version.

  I tried to recreate the USB key with a new download installer.

  The first Apple support guy that I talked to said to make a recovery of the internet. The problem here is tries to install El Capitan, but never finished. The countdown reaches 0, then goes up to about 30 minutes back. It just keeps doing hours and hours.

  The second Apple support guy that I talked to said to do a regular restore (CMD + R), but it always goes to the recovery of the internet. I'm guessing that there is no restore partition.

  The computer has 10 Windows installed on a Bootcamp partition, and that seems to work very well. I can't installed macOS.

  The computer is a mid-2015 15 "MacBook Pro. I use the disk utility installation program to format the Macintosh HD partition. I used the El Capitan terminal Installer set the hour correct system. I tried to install using another USB port.

  I would appreciate help.

  Video of the problem of recovery of El Capitan Internet: https://www.youtube.com/watch?v=H5a4uUq_C3o

  Screenshot of Sierra install question: http://imgur.com/k79us9q/

  Access the item in window Menu at the top of the screen. Select the Setup log. This should give you an idea of why it's a failure.

• Black screen C805D - 13G satellite after the switch of the bios to the CSM

  Hi everyone, I really need help on this one.
  I have a Satellite C805D - 13G and it was working fine until I decided to install windows 7 on it. I did a USB key with the OS and the modified bios to UEFI in the CSM to boot from it. Well, since that point the PC never started again. It turns on but it shows nothing (even in the external vga monitor). RAM and HARD drive are very good.
  Y at - there anyone who can help? I have seen many similar cases on the internet, but I can't find any solution (already tried to disconnect the battery and hold the power button for 60 seconds)
  Thanks to all who help me to sort it.
  PS Sorry for my English, I'm from the Italy

  You just need to put the Boot Mode to the CSM to install Win7.
  If your USB boot it cannot be a problem with it. Try to create the USB using "WinUSB Maker"

• Satellite A30: PXE - E61 media test check the cable failure

  OK got this message on a cell phone of friends
  Others have played with him and made it worse, and now I received the laptop to try and fix.

  When you start to get

  PXE - E61 media test check the cable failure
  PXE - M0F outgoing PXC Rom

  If his tent to boot from the local network instead of the hard drive I have reset bios by default I disabled everything when I F12 boot to hard drive get the error message rΘation and one at a time, that nothing works even when I try to disable lan starts, he tries always to.

  When I try to install from disk backup it is hard disk not found, but in the bios the hard drive is located and can not boot from it.

  I tried with winxp pro disc to try not to get an OS on the laptop any partition to the OS but a blue screen with an error 0 x 00000050 CrashFree disk gives error 1170 if I remember correctly.

  I can't update the bios with new version because she needs windows, I can't stop the lan because there is no setting in the bios very minimul with about 4 useful settings in it.

  Is the hard drive turned or is this a bug in the bios that it detects drive hard, but does not assign a letter properly?

  If I try the recovery console in xp Setup there is no disk to read or write, if I maps the drive in recovery only the cd/dvd rom found no hard drive.

  Any help would be great thank you because I don't know what to do, I don't think that the hard drive is shot myself but maybe if I can get a laptop and try the hard drive what she will say if it is or not, but for now I'm stuck with no. had to go.

  I tried many things
  1. cdrom out and replaced plugs
  2. Jack hard drive out and replaced
  3 took Ram out and replaced
  4. start since the utility disk
  5. start from the winxp disk
  6. Windows XP recovery console no hard disk on c d e f g
  7 disc utility says no hard drive gives me a x: > promt error number 11030 invalid destination by car. Hard disk by bios HITACHI DK23FA-30-(PM)
  9 winxp error if I try to install 0x0000008e

  Post edited by: Shoa

  Post edited by: Shoa

  Hello Shoah

  You did what I would recommend.
  I remember what one of my friends has had a similar problem on an A200. But after the BIOS reset by default, he was able to install the OS from the recovery CD.

  The whole is very mysterious. It looks like a HARD disk failure, but the HARD drive is recognized in the BIOS. But have you checked the HARD disk in other laptop or computer?
  You can try to connect the HARD disk via the external USB HDD controller and could check if it s ok and could format.

  I recommend also to remove the CD/DVD drive and the HARD drive, then set the BIOS to default settings immediately (don't forget to save changes). Then try to power upward without the HARD disc and the drive.
  To my knowledge, you should get an error message.
  Then stop the laptop and put both the device in Notepad. Then go to BIOS and check if both devices are properly recognized.

  Finally, I must say that I don't know if my proposal will help m.
  If she won't help, you will need to contact an ASP in your country, because it really looks like a serious problem.

  Good luck

• Satellite L50 - Win 8.1 - passage of the CSM in UEFI?

  Hi guys.

  Yesterday, I upgraded my Toshiba Satellite L50 with an SSD.
  I installed windows 8.1 and everything seems to be ok... except a little thing...

  When I booted the usb to install windows 8.1 my bios has been installed in the CSM (because I read that if I were to UEFI, usb would be not be started) and now if I try to go to the UEFI pc cannot find the ssd drive and says something like "Reboot and select the right device.
  (I already tried with secure boot eneabled one and off the two but it's the same)

  At the moment I am active CSM with AHCI mode... What can I do to switch in uefi?

  Thanks in advance.

  Good news... Thanks for the feedback: spennacchione

• SMART short self-test - on the second hard drive

  HP Pavilion Elite e9270t - 3 yrs old, Win7.

  Became the error SMART self-test short the original drive so I installed a replacement and transferred files.

  I get the same error on the second h/d. I have my doubts that the second disk is having the exact same error and wonder if the s/w test is actually the problem.

  It could very well be the connectors that gives you the question instead of the HARD drive itself. I would run the HARD drive test in BIOS instead of the short test.

  Try this:

  1. Plug the AC adapter into the computer if it is not already connected.
  2. Turn off the computer and wait five seconds.
  3. Press the power button to start the computer and repeatedly press the F10 key to enter the BIOS Setup menu.
  4. Use the right arrow or left arrow keys to navigate the menu selection to find the Auto test primary hard drive option. Depending on your BIOS, it is under diagnoses or tools.
  5. Select self-test primary hard drive, and then press the Enter key to start the test.

  Figure 1: Example of a primary hard disk self test screen

  
  

  The hard drive self test performs a Quick Test , followed by a complete Test. During each test, the window displays a status bar and a scheduled for completion

  Let me know the results of this test.

  THX

• Why my test of the proximity sensor has failed

  Why did my test of the proximity sensor fail?

  What test of proximity sensor? Who did this test?

  If your proximity sensor does not work, make an appointment at the Genius Bar to your Apple Store local or the Service Center authorized Apple it is evaluated.