View date and user name on blade results
Hello
Is it possible in captivate that a user can enter the user name and the date at the beginning of the project, which later can be displayed on the results slide
Hello
Its good news. It was a pleasure to help you.
Thank you!
Tags: Adobe Captivate
Similar Questions
-
Calendar view-only and users are unable to change the time.
We use Windows Server 2003 R2 active directory and group policy.
Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also
pls sugget me to resolve this issure
Calendar view-only and users are unable to change the time.
Hi sunil77,
Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.
-
I am connected to wifi in the hotel (Orange) and I can't SEND email, I just have to receive them.
Whenever I update "send/receive" a message asking me to write the network password and user name. This from my mail server (not orange because that one is ok I have access to the internet).
Most of the suppliers do not let you send if you are not connected through them, or they have special settings. So for now, see if you can access your e-mail via webmail and use this interface and in the future, contact your ISP and ask them if there is a way to send emails when you are connected through a different network.
Steve
-
How to clean my computer of saved passwords and user names?
How to clean my computer of saved passwords and user names?
Original title: I'll sell my computer
You must wipe the drive and reinstall the operating system.
Unless you want other snooping in your files you need more than just delete your user names and passwords from different places on the computer.Do not wipe the recovery partition. The recovery partition is a small part of the disk that contains the files needed to restore the computer to factory State, see the computer user's manual or check the manufacturer support site for the from.
Secure erase
http://CMRR.UCSD.edu/people/Hughes/SecureErase.shtmlReinstalling the operating system will take care of the major PART of the problem, but to be completely safe, you may want to replace the hard drive.
-
Get a pop-up box 'Please indicate the password and user name for Proxy server"...
I don't know what to do... Please help.
Hi G-R-O-C-K,.
Looks like you're behind a limited connection / network.
These are the entries, you need to add:
https://na1mbls.licenses.Adobe.com
https://IMS-NA1.adobelogin.com
https://adobeid-NA1.Services.Adobe.com
https://na1r.Services.Adobe.com
ccmdls.Adobe.com:443
IMS - na1.adobelogin.com:443na1r.services.adobe.com:443prod - rel - ffc - ccm.oobesaas.adobe.com:443
LM.licenses.adobe.com:443
www-DU1.adobe.com
When you try to connect to WIFI, try connecting with a cable and see if you get the same.
Otherwise, see: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Hope this helps you solve the problem.
Kind regards
Harrie
-
Insert current date/time and user name in the form.
My apologies for the newbie question.
I have a form that is based on the customer table, in the table, I username and modifiedDate columns. How can I fill out these text fields with the user and the current date and time?
Thank you.Create a PL/SQL process page page YOU load - after the header and block PL/SQL, write
APP_USER select:, To_char (SYSDATE, "MON-DD-YYYY HH24:MI:SS)
IN: PX_USER_NAME: PX_DATE
Double;where PX_USER_NAME and PX_DATE are page elements.
Thank you
MehabubPublished by: Sheikh Mehabub on August 23, 2012 07:00
-
View the login user name and time on an update - APEX
Hello
I'm new at APEX, my requirement goes this way, I have an XYZ table and for that I generated a report with multiple columns, and for that I have a form to change the /update values on to a column particlular in this table, where in the form, I got a pop-up for this column (ABC) (ABC) so that if clicked what a choice list dispalyed on the selection which it gets reflected in the form and when I Click on apply button on the form changes. In the report the values relavent get changes according to the database, that's fine, but I have 2 more (columns edited_name, edited_time) where change on that (ABC) I need the name of the current user and time to be displayed in the report.
Well the user name here is the user_name associated to the my application (Apps reports) connection not the APEX worksapce username are used to form. Because the same application you will be used across many people and updations made on this column at the same time. It should go down with it.
At the end in the report, based on the name of connection (application), I need to display the edited_name & edited_time. Can someone help me please.
Thank you
NAV.A trigger is the right way to do it and your trigger seems to be ok. It must be installed on your table, which means on the database.
What problem did you experience?
the APP_USER is situated in the context of your session database after you connected to your application. You can't test it in the order sheet Apex SQL for example, because then it is not defined. The function v gives you access to this and other context variables in pl/sql environment.
Published by: Sven w. on May 20, 2010 09:13
-
I can not access another user account. It to request a username and password. I enter the user name is correct and there is no password. The login page, used to have two icons of the user; but for some reason, the last log on the user icon is here and a new white icon for the new user.
Once a week a few posters noted a problem similar to yours. In this case, I post the answer you see below. The little that I find very irritating that in each case, without exception, the poster was not able to return and account for the results, either because they found my recipe too difficult to follow, or because he or she lost interest, he or she could not be bothered to post a few comments for the benefit of other people with the same problem. There it is again...
I do not know why you can not change this password, but maybe this method will shed light on the question:
- Safe boot mode.
- Click Start.
- Type the three letters cmd into the search box.
- Press Ctrl + Shift + Enter
- Click on "Run as Administrator".
- Type the following commands and press ENTER after each one:
'John Doe' ppp NET user / add
(to create an account called "John Doe" with the ppp password)
net localgroup administrators/add "John Doe"
(to promote "John Doe" to the Administrators group)
net localgroup administrators/del 'John Doe'
(to demote this account)
NET user "John Doe" ppp
(to set the password for John Doe at ppp)
NET user "John Doe" / active: Yes
(to activate this account)
NET user "John Doe" / active: No.
(to disable this account)
NET user "John Doe" / del
(do not delete this account)
NET user
(to view all existing account names)
-
Apex: button to add dynamic date and user for the article page
[warning... post newbie]
I have a simple table of questions and actions.
users change/update records using the form on a table with the report.
There is a comments column to record the latest updates; users must add their name and the date at the top.
I am currently using a button that calls a dynamic action to execute javascript to insert the date and the user at the top of the text in the field comments (UPDATES_NEW_ON_TOP)
problems:
1 Insert date works on firefox/chrome but not IE
2. can't seem to find the right code to insert the currently logged in user name
extract javascript below...
Notes:
-After reviewing the packaged applications I see more elegant ways to do this but we are going the long way to learn stuff
-the JavaScript below is probably very poorly formed - apologies if it upsets anyones sensitivities of coding
-open to any means to achieve the desired result
beer on me for any assistance that you can give
var d = new Date();
var monthNames = ["Jan", "Feb", "Mar", "Apr", "May", "Jun",]
"Jul", "Aug", "Sep", "Oct", "Nov", "December"];
document.getElementById("P3_UPDATES_NEW_ON_TOP").innerHTML =.
d.getDate () + ' - ' +.
monthNames [d.getMonth ()] + ' - ' +.
"" d.getFullYear () + ": [ID] +.
String.fromCharCode(0)) (13) + string.fromCharCode(0)) (13) + P3_UPDATES_NEW_ON_TOP.value;
;
Thank you all for your contributions and redirects
-
Admin Console - requires that the user Admin password and user name valid
I am running FMIS4.5 on CentOS5.5
FMIS runs and I can connect via Flash Media Encoder.
Displays and Web administration console: 1111 gives the xml output, however
During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.
conf/FMS.ini:
###########################################################################
# fms.ini contains alternative to Flash Media Server variables #.
# the configuration files. Lines beginning with ' # ' are considered comments. #
# A variable substitution is in the form < name > = < value >. All the way to #.
# the first '=' is considered the substitution variable name and #.
# everything after the first '=' is considered the substitution value. If #.
# you want a substitution variable to have beginning or trailing spaces.
# include double quotes around the value. For example, foo ="bar" #"
###########################################################################
###############################################################
# This section contains configurable settings in the Server.xml file #.
###############################################################
# Username admin server
# For example:
# SERVER. ADMIN_USERNAME = foo
#
SERVER. ADMIN_USERNAME = Admin
SERVER. $admin_password = str34m1ng
# Port and Flash Media Admin Server IP address must listen to
# For example:
# SERVER. ADMINSERVER_HOSTPORT =: 1111
#
SERVER. ADMINSERVER_HOSTPORT =: 1111
# User Id in which to run the process (Linux only)
# For example:
# SERVER. PROCESS_UID = 500
#
SERVER. PROCESS_UID = 500
# GID in which to run the process (Linux only)
# For example:
# SERVER. PROCESS_GID = 500
#
SERVER. PROCESS_GID = 500
# Key license for Flash Media Server
# For example:
# SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
#
SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.
# LIVE_DIR is the full path of the sample application 'Live '.
folder # to store any live streams recorded by the server.
# For example:
# LIVE_DIR = \applications\live < FMS_Installation_Dir >
#
LIVE_DIR = / opt/adobe/fms/applications/live
# VOD_COMMON_DIR is the full path to the sample application "VOD".
folder # to the storage on demand and progressive download of fichiers.flv/.mp3.
# File stored in this folder can be listened to and are also available PD.
# Note: If you use the installation default Apache as a Web server.
# If you change VOD_COMMON_DIR and please change the document root
# in the httpd.conf file accordingly.
# For example:
# VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >
#
VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod
# VOD_DIR is the full path to the sample application "VOD".
folder # to store only the fichiers.flv/.mp3 on request. Files stored in
# This file are not PD-able
# For example:
# VOD_DIR = \applications\vod\media < FMS_Installation_Dir >
#
VOD_DIR = / opt/adobe/fms/applications/vod/media
# The maximum size of the FLV cache, in megabytes.
# The default is 500 MB.
#
SERVER. FLVCACHE_MAXSIZE = 500
# To start and stop the server HTTP included throughout
# with FMS.
#
SERVER. HTTPD_ENABLED = true
################################################################
# This section contains configurable settings in Adaptor.xml #.
################################################################
# Application to the virtual host directory
# For example:
# VIRTUAL SERVER. APPSDIR = C:\myapps
#
VHOST. APPSDIR = / opt/adobe/fms/applications
VHOST. ALLOW all =
####################################################################
# This section contains configurable settings Application.xml #.
####################################################################
# List of semicolon delimited paths of research for loading script
# For example:
# APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts
#
APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib
###############################################################
# This section contains configurable settings in Logger.xml #.
###############################################################
RECORDER. LOGDIR =
####################################################################
# This section contains configurable settings in Users.xml #.
####################################################################
# Enable or disable using HTTP requests to run admin commands.
# The value "true" to enable, otherwise it will be disabled. The
actual orders # allowed for the server admin and admin of the virtual host
# users can be defined in Users.xml.
USERS. HTTPCOMMAND_ALLOW = true
Users.XML:
< root >
< UserList >
<!-this tag defines a server administrator. ->
< username = ' ${SERVER.» ADMIN_USERNAME} ">"
<!-salted Hash of the password for the administrator of the virtual server. ->
< password encrypt = "false" >$ {SERVER. $admin_password} < / password >
<!-this administration cannot connect to the server of the-> specified
<!-hosts. This is specified as a comma-delimited list.
<!-host names or domain names and/or (full or partial) IP->
<!-addresses. For example,-->
<!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >
<>allow all < / allow >
<!-this admin is unable to connect to the server from all the...
<!-specified hosts. This is specified as a list by commas->
<!-the name of host or domain names and/or IP (full or partial) - >
<!-addresses. For example,-->
<!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >
< deny > < / nie >
<!-specifies the order in which evaluate < Allow > and ->
<!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >
<! - default is 'Deny, Allow', which means that access is allowed - >
<!-unless specified in < Deny > < Allow > and not. ->
< order > allow, deny < / order >
< / user >
< user name "janedoe" = >
< password encrypt = "false" > S4mpl3P4ss < / password >
allow <>< / allow >
< deny > < / nie >
< order > allow, deny < / order >
< / user >
< / UserList >
< AdminServer >
< HTTPCommands >
<!-turn on or off using HTTP requests to run admin commands. ->
<!-set "true" to enable, otherwise it will be disabled. The - >
<! - actual orders allowed for server admin and admin of the virtual host - >
<!-users can be defined in allow it and deny elements. $
< activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >
<!-list orders admin server accessible through HTTP. ->
<!-add several commands separated by commas. 'All' indicates->
<!-all orders (it is not recommended to allow orders). ->
<!-Separate multiple commands with commas. ->
Ping < Allow > < / allow >
<!-list of orders admin server refused access via HTTP. ->
<!-add several commands separated by commas. 'All' indicates->
<!-all orders. ->
< deny > all < / deny >
<!-processing order for refuse and allow command lists. 'Deny, allow' - >
<!--means that the command will be permitted if the order is allow-->
<!-list or not in the deny list. 'Allow, Deny' means the--> command-line
<!-will be allowed if it is in the allow list and not in the - >
<!-list of deny. ->
< order > deny, allow < / order >
< / HTTPCommands >
< / AdminServer >
< / root >
Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:
< result >
errorof the < level > < / level >
< code > NetConnection.Connect.Rejected < code >
< description > Admin user requires valid user name and password. < / description >
< timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >
< / result >
Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.
Any help is appreciated!
Hey Jon,
Please take a look at this. Should help.
http://forums.Adobe.com/message/4346847#4346847
Thank you.
-
By example, if I search something on Google, and I make a spelling error, this search is saved. If I fill out some forms, the information is saved, which is useful, sometimes, however, if I made a spelling error or misinformation on the ground, which also is stored. How to choose which is registered or not, or how I remove what has been stored that I don't want, or want more stored?
I rarely store my passwords but user names are useful, especially for e-mail, because nowadays, there type not only your username but the field also, which can be very time consuming and if you have several accounts with the same provider, it can become rather trying. However, if you type anything in these boxes and press return, this information is saved, if you wanted to, or not. How what is backed up we do not want to remove us? I don't want to delete everything, just things. I want to be able to be selective, as I can with my browser history; some things I want to keep.See this article. https://support.Mozilla.org/en-us/KB/settings-privacy-browsing-history-do-not-track
-
Try to set up the e-mail function analysis. Using the button on the printer, I go as far as to go to outgoing SMTP and then I get an error message that the user name or password is incorrect. I don't know what is the right user name or password.
I want to get rid of whatever information incorrrect and redo information. Nobody seems to understand the problem. Any help?
Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
If you are not familiar with messaging private forum please click here to learn more.
Thank you
Omar -
The startup in XP Home Edition, the following warning message appears: "system cannot log on. Verification of user name and domain are correct.
If the user clicks on the "OK" button on the warning box, it allows the password to type in, then open a session.
This error message occurs no matter what connection parameters are selected in user accounts - with or without password required. And no matter if the main newspaper is the value administrator, user or visitor.
Is there a work around for this problem?
Hello
Take a look at the following:
You cannot log on after you remove the computer from the domain
-
Where can I find the Windows password and user name information
I download a new system from my computer and everything was going well until they asked my Windows username and password. I do not remember, and I can't find. Can you get it someone please let me know where I should look... Thank you
Hello, dreamcatcher16
Please use the Forum for answers!
You upgrade to Windows Vista or Windows 7?
You can get your username by going to C:\Users\ and find your user name under Windows Vista and C:\Documents and Settings\ for Windows XP.
We are unable to provide assistance with respect to the recovery of a password.
If you are able to connect to your machine and have administrator rights, you can then change your password by clicking on start, right-click on computer and choose manage. Open the users section and groups, then users, right click on your account and choose set password.
I hope this helps.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to insert the last updated date and user id to a form?
Hello
I created a form to enter data into a custom table.
When a new record is created, I want to keep track of the date created, last updated date, and who (user id) enters the form.
Can you please help or point me to a good place to look for this information?
Thank you!
LCCreate four new columns in your table called Created_On, Created_By, Last_Updated_On and Last_Updated_By.
You can create a trigger for the rest:
create or replace trigger "
" before insert or update on " " for each row begin if inserting then :NEW.Created_On := sysdate; :NEW.Created_By := v('APP_USER'); end if; if updating then :NEW.Last_Updated_On := sysdate; :NEW.Last_Updated_By := v('APP_USER'); end if; end; Whenever you will add or modify data in this table, the trigger will automatically fill these fields.
Kind regards
Mathieu
Maybe you are looking for
-
ITunes does not appear on my Iphone, so I can't use it except on Apple Carplay
I am new to Iphone and I recently erased the settings on my Iphone. Now when I press the button music, a screen will appear showing a woman with headphones on and the word MUSIC. The screen seems to be inactive and unresponsive. ITunes does not appea
-
El Capitan OSX Echo for a facetime call
Hi, I upgraded my brother 2010 Macbook Pro 15, but also parents 2012 iMac 21.5 in El Capitan and now when I do calls facetime with them, their microphones seem to be really bad echo. To check if it was a hardware problem or software, I took the road
-
Trying to make online games. I continue to connect failures. I downloaded the latest version of Adobe, but the problem persists. And while playing the games. The game is all choppy. Any advice.
-
Qosmio G10-122: I can't find the Qosmio player
I buy the qosmio g10-122, but I can't find the Qosmio player in Notepad.I need this software and I will download this Internet but I'm not sure this could work whith my laptop.
-
arrow keys with Games__
Hello I'm having a problem with the games, not online games.for example in a racing game, I can't just hold the UP arrow button as the car stops after a few seconds, I need to press the key several times.So basically, I have to press the key several