View horizon new domain

Similar Questions

• How many licenses do I take to view Horizon?

  I'm under VMWare View Horizon 5.3.1 generation-1634134.  How can I find out how many licenses I am registered?  I have a license code for a pack of 20 that I also have to add to the server, but would like to visually see how I have before and after I add the package of 20.  I also need to know where to add the license code for the new pack of 20.  I went to the product licensing VMWare Horizon administrator view, view Configuration and usage, change license, then entered the new code, but I get an error message of ' license data could not be obtained for this type of product ", so I don't know if it is when I enter the code or if I should add it elsewhere.  Ideas?

  View just wants to that you have a valid license and does no checking to verify if you are over your concurrent limit.    If you want to enter an additional license, you would edit license screen, but you wouldn't need to do if you need to unlock additional features.

• Customer view Windows - FULL domain name question

  I was wondering if someone had met before?

  I have a small view Horizon 5.3.1 of the network running test. I have 1 connection to the server and paired 1 security server. I have no problem with my security server sitting in my DMZ for use with remote access. The problems begin when I try to connect to the server of connection when I'm on the internal network. When you use the latest version of the Windows client view (running on Windows 8.1 x 64) and tryping in the FQDN of the server connection, I just get an error immediately says "unable to connect to the server. If I use the IP address then it works fine, but obviously is of no use, because I can't verify the cert.

  I had problems in the past with the help of short DNS (which does not), but I am not concerened that I want to use full domain in any case names.

  I checked the DNS and everything seems fine. If I ping domain name FULL of the connection to the server, I get a reply, all other servers are accessible by their FULL domain name and access HTML works fine using the FULL domain name and my certs check out OK.

  It sounds like a problem in the Windows Vista client. If anyone has any ideas, I would be very grateful.

  Thank you

  Pete

  It really depends on the whole upward. But we use the same URL for both. Ours are the same.

  Example of

  HTTPS://view.domain.com:port

  And we even put Blast Gateway for HTTPS for security servers and the connection.

  then when you pull up to your customer. To connect to the server, simply type in view.domain.com and it should work if you have DNS entries on the DNS server for your domain.

• Working with windows 8 or 8.1 and 5.3 view Horizon using the VMware customer 2.3.3) slow scrolling and hesitate

  I was wondering if it's something big or something right in the House.  When the wired or without wireless on Windows 8 and 8.1 (laptops / tablets), using the client to view Horizon 2.3.3 I get hesitation to scroll in Outlook 2010 and Excel more large spreadsheets, that I don't see on my Windows 7 machines using the same client.  Anyone else noticed this or fix?

  Thanks for the tips...

  I know it's a bit old, but found the fix for our windows users tablet 8.1.   On the client itself, we have removed the cache of the client completely do the following steps:

  Create a new file as below.

  C:\Users\vditest\AppData\Local\Teradici\pcoip_client_settings.txt

  and write this line in.

  PCoIP.enable_tile_based_image_caching = '0 '.

• VMware VDI vs VMware View Horizon?

  Hi all

  This should be easy for you, the gurus of VMware

  I have a requirement to expand a network of a single
  location central out for a large company and I am looking to use Thin
  Customers in the new corporate reach in a VMware VDI environment offices
  in the center of data centralized where we already have a full blown 5 of Vsphere
  environment for our servers.

  I was originally looking for VMware VDI via VDA (http://download3.vmware.com/demos/vdi/)
  and was sold on the idea that it would be a good choice given the WAN
  traffic to the Thin Client workstations based on RDP/PCoIP and so
  not particularly heavy.

  However since then looked back to VMWare View and this
  seeks to do the same thing that the VDI put in place and seems to have much more
  information about this.

  I first thought that VMware View Horizon set caching of desktop
  locally (as for a profile of the end user on the WAN) has no sound
  too good to the traffic congestion, etc. so I rejected directly at the exit!

  Can someone tell me if the VDI via the VDA solution has been replaced
  VMware View Horizon? And if so point me a definitive guide for VMware View

  Thanks in advance

  David

  Network humble himself in VMware engineer!

  The link in your feed was on VDM 2.0 which was the first iteration of VMware VDI market.    The most recent is VMware view Horizon which can be found here, Horizon of VMware View (formerly VMware View) (VDI) Virtual Desktop Manager | United States of America.     There is a lot of information on this page that you can see and if you have any questions please do not hesitate to post them in this forum.

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• Intermittent connection problems migrate SIDHistory and new domain

  Hi all

  Wondering if anyone ahs met it. We have migrated the users and workstations of an old domain (domain A) and included their old sid in the SID History attribute for access to resources. We have also double ACL'd users and groups into action (just in case SID History has failed).

  Once done with the migration, we have added a GPO security policy in the new domain (domain B) to deny local logon to the Domain (domain A) domain users group old. That would give us enough time to finish with server migration while ensuring that users do not connect you with their old domain credentials.

  What's happening at random, from time to time is that a user in the new domain will receive a logon denied error. The error indicates "you cannot connect because the method of login, you use is not allowed on this computer. For more information, contact your network administrator.

  The only reason why I think that the new users in the domain are denied would be SID History, but am not sure. Anyone know why this is happening?

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to migrate users existing AD to the new domain in Server 2003r2

  I need to migrate users from the old domain to the new domain please help in this matter.

  Windows Server gurus all them lying around in the TechNet forums, here, we are dealing with the problems of user security.

  http://social.technet.Microsoft.com/forums/en-us/categories

• Old server will allow new domain and domain controller.

  We had old netwrok running a sbs2008 and 3 Server 2003 with domain name xyz.local(not actual), now we have a new server sbs 2008 with new domain name xyzit.loca and put some old sbs2008 at rest (off-grid). How can I join servers olde new domain and domain controller from NW

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• View horizon black screen

  Hello

  We have a working environment 6 view Horizon, and it works with view client and html. But today, I was at a customer, and when we tried my laptop, we where able to connect, but when I chose the VM, it goes to black screen and after 10-20 sec it disconnects. It must be something on the network of customers since it works from other places, and my laptop works also in other locations. I was able to use RDP, and HTML, so my question is then what do I the customer will have to check in their firewall? I thought that 'users' needs not what anyone special ports open on their side, thought it was by default ports that where free... but I'm not a guy to network... so

  Have confirmd with vmware support that this question lies in the customer network, problem with the old hardware when it comes to router / firewall... need to update firmware

• Completely remove sdconf.rec connection server VMware view Horizon 6

  Greetings,

  I want to completely remove the sdconf.rec file downloaded from my connection to the server VMWare View Horizon 6.0.1. In previous versions, it was that I had to delete the Sdconf.Rec of C:\Windows\System32 and set the attribute to EAP-SecureIDConf under CN = < servername >, OU = server, OU = propriΘtΘs, DC = vdi, DC = VMWare, DC = int '0' but this attribute does not exist in version 6!

  Just deleting the Sdconf.REC file does not work, after doing that (even after a reboot) it always says "a Sdconf.REC file has been downloaded" when I check the settings of the connection to the server.

  Does anyone know how to delete this file in version 6? I'm this close just removed the server connection and security together and do a complete reinstall.

  Thanks in advance!

  Bram

  bverm wrote:

  Haha, Yes, it seems I was typing the variable wrong, changing the attribute now works, but I still see "an sdconf.rec file is already downloaded" even after change to the attribute and remove the sdconf.rec file in system32, even after a reboot of the connection to the server.

  This should be OK. What you did is invalidated the sdconf.rec file. It probably will always exist, but watch to see if it has been invalidated. that is, it should now be much smaller than your original and so not usable, which I think is what you wanted to achieve.

  If you want to just disable the RSA SecurID authentication, which can be made in view administrator.

  Please confirm.

  Mark

• I had Mac Adobe Acrobat Pro (October 12, 2013) I tried the new domain controller and now my Adobe Acrobat Pro is gone how can I go back? I don't like DC

  I had Mac Adobe Acrobat Pro (October 12, 2013) I tried the new domain controller and now my Adobe Acrobat Pro is gone how can I go back? I don't like DC

  Hey leonardg88213387,

  Please post on the Adobe forums.

  Could if it you please let me know what exact version of Acrobat you are using.

  If you were using XI of Acrobat, you can check the doc KB below link:

  Adobe Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI

  OR, if there is another version, then uninstall the DC version and install the version you want from here:

  Other downloads

  Hope that helps.

  Kind regards

  Ana Maria

• where is the highlighter? can find it on the new domain controller.

  where is the highlighter? can find it on the new domain controller.

  HI Maria,

  I can understand your concern & will help you with that.

  (1) Please open your PDF in Acrobat / Reader DC.

  (2) choose the right comment tool.

  

  (3) all tools comment will appear at the top as shown in the screenshot below.

  

  (4) select the one circled to highlight the text. You can also check the name of the tool to your mouse hovering over him.

  I hope this will solve your problem.

  In case if you still encounter any problem or have any questions please let us know. We will be happy to help you.

  Kind regards

  Nicos

• Unable to create the new domain file

  Hi experts

  I am trying to create the new domain file, but there is no success.

  Tools-> domain Administration > file-> Select

  When I choose, the dialog box open typed the new name for file field, you click Open.

  the error message is "mydomains.xml is not a domain file.

  Please tell me how to create the new domain file where you will store the areas associated with my project.

  Thank you

  Hello

  With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

  Documentation:

  SQL Developer Data Modeler does not include the default domains file.

  To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

  The file is located in /datamodeler/types/defaultdomains.xml

  Basically, you should

  1. create /datamodeler/types/defaultdomains.xml if it does not already exist

  See Tutorial: modeling of data for a small database

  2. create some (open) design and import file fields to file-> import-> areas

  3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.