View internet to two monitors at the same time
Can you tell me how to adjust laptop screen, so I can open it in the laptop and my desktop height monitor, and
I'll be able to close my laptop and working on the desktop monitor?
Thank you
Whether or not this works depends on the material that contains your laptop. See its documentation or the Web site of the manufacturer to see if it takes in charge the features you want.
"baby2025202" wrote in the new message: * e-mail address is removed from the privacy... *
Can you tell me how to adjust laptop screen, so I can open it in the laptop and my desktop height monitor, and
I'll be able to close my laptop and working on the desktop monitor?Thank you
Tags: Windows
Similar Questions
-
Hi all. Can I use both s-video and VGA at the same time? S-video signal must be output for LCD projector and VGA signal - in LCD screen. He
Hello
No, as far as I know it s is not possible.
You can change the settings for laptop / screen LCD; laptop / TV but no LCD/TVThese settings you can change using the FN + F5 key combination
-
Two applications at the same time on the M200?
On the Amazon website (and I'm sure elsewhere), it says on the M200:
"With the optional Tablet Multi Dock station, you can connect an external keyboard and monitor allowing you to run different applications on screens separated at the same time."
I've been reading my M200 and the multidock and it doesn't say how to do this. It seems strange when it's supposed to be something special you can do with the M200, he's not telling how you do! Could someone enlighten me please?
Thank you very muchHello
In my view, this means that the option of extended desktop.
If the external monitor is plugged so that you can use this option to enlarge the display option. This option, you can activate with the key FN + F5 combination. If this option is enabled for example, you can open two widows of IE and one from this window, you can switch to the external display. In this case, you can use two applications at the same timeGood bye
-
Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
Does anyone else have or had this problem too?
I know I'm a sucker for pc, but please go steady on me, your.
Win pro 8.1.will you please and thank you very much indeed, couch.
Malygris1 wrote:
Hi there @SofaQueue
Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.
I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.
ETC.
Let me know if you still have problems and view the details of what happens.
I will mark it as resolved now. Very useful, thanks.
What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
Simply turn off the audio improvements and testing showed once again that's all it was.
Thanks again though, nice to see people are willing to help so much!
Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.
-
Reconfigure fails when adding two volumes at the same time
Hi all
We use vRealize ver 6.2.1 6.2.1 Build Automation - 2543390.
We found a bug strange reconfiguration of a virtual machine. If I add a volume of hd at a time, there is no problem. But if I try to add two volumes at the same time him reconfigure fails with the message "reconfigures has not, waiting for retry.
On the vRA 'Infrastructure-monitoring-> log >' error is: "machine Reconfigure failed: Machine: xxx, error: apply WaitForTask StorageDrsRecomendations_Task Enttity...» XXXX.VMDK invalid data store path.
On vCenter Console, the error is: "path of the invalid data store [Cluster... vmdk]."
The same error occurs using vCenter 5.5 x and 6.x
Any ideas?
Thank you very much
D.
It was a problem with DTS investment by vRA. We have identified the problem and the fix will be available in the next version.
Thank you
Kumaran
-
Creating records from two Tables at the same time...
I would be very grateful if someone could help with the following query.
I have two Tables, Tbl1 and Tbl2. Tbl1 has the following columns: -.
Tbl1_Unique_ID, Description
Tbl1_Unique_ID is of type ' * number *' and ' * PK * ', Description is of type' * Varchar2 *'.
Tbl2 has the following columns: -.
Tbl2_Unique_ID, Description, Tbl1_Unique_ID
Tbl2_Unique_ID is of type ' * number *' and is the ' * PK * ', Description is of type' * Varchar2 *' and Tbl1_Unique_ID is of type ' * number *', is a ' * foreign key *' and is the ' * primary key *' from Tbl1.
While I can create a page to display and create folders in Tbl1, I'm not course coding required to view and create records Tbl1 and Tbl2 simultaneously, as well as regarding the two together at the same time.
I know that it involves one ' * INSERT *' statement, but I have problems the correct SQL query.
Can anyone provide any assistance will be appreciated.Have you tried to create a form master / detail page? Because it seems that is what you need...
-
Two Dynadocks on Mac - VGA two displays at the same time?
I have two Dynadocks: PA3542EY1PRP and PA3541EY1PRP.
They are connected to the iMac 21 'Snow Leopard'.
All USB ports work but I can't run that two VGA displays simultaneously.If one works, the other doesn't.
Display links drivers are updated.
There must be a conflict.Any help is appreciated.
Thank you very much.Hmm I'm not really sure if the system can access two external graphics chips Dynadock Mr. the fact is that you need to install the Dynadock software and my knowledge, it not have access two GPUs at the same time.
-
My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?
settings - phone - call another device - off.
One of you should get their own apple ID, you just go to have problems later.
-
How to watch two clips at the same time on the other, with an opacity of 50% each. It is confirmed that the position of the object even two clips of mergers.
Thank you
PPut a clip on top of another in the timeline panel. In the video Inspector reduce the opacity of the clip on top.
-
two cursors at the same time move under a certain condition
I'm trying to move the two sliders at the same time under a given the conditions. I have my program set up as follows:
When 1st setting on "Continuous", all output values 4.
When the 1st setting on "Pulse", values output based on ' 'Send the Signal' button support according to the following below:
1 1 shows the value of cursor 1 and 2 slider when the switch is on "simultaneous."
2. the cursor 1 and 2 output the value of cursor 1 and 2 slider when the value of "independent".
My question is based on 1 above. I basically have a hard time trying to figure out when the condition is set to "Simultaneous" be able to see cursor 2 movement.
Can anyone help? A large part would be appreciated.
NOTE: The output is correct how I want it. I want just the cursor 2 move when cursor 1 must move under a certain condition.
All I needed was to move the Slider 2 property node before the total multiplcation.
Thanks again James.Morris for your help!
-
Avoid to get two theards at the same time
Hello
I was wondering how to avoid to run two threads at the same time in teststand. When I using teststand, I found it can run two threads in simultaneity.for example, I can open a file sequence, using single-pass enter point to run a theard, when this theard is not finished, I use single-pass or TestUUTs enter point to run other theard. I want to avoid this case. Is there settings, we can get motor teststand to tell me a thread is running or not?
Thank you!
You write a custom user interface? If you use an application Manager (all the example user interfaces and the sequence editor to do), you can see:
ApplicationManager.Executions.Count > 0
If you use just the engine that you can keep the number of executions by increment your account upon receipt of the UIMsg_StartExecution UIMessage and reduce your number when UIMsg_EndExecution is received.
If instead you want to determine the number of executions of a sequence running, you can use RunState.Engine.GetInternalOption () to get a reference to the Application Manager (at least of the UIS and the sequence editor that use an Application Manager) and then do the following ActiveX to get the Executions.Count property.
Hope this helps,
-Doug
-
I run a custom built Tower pc, with windows xp svc pk 3 on this subject. ASUS MB brd. have a large woofer and two small tweets, it looks like that I play the song even in two places at the same time, only not synchronized. All confused, lived all the diagnostic test can think and all say it works fine of course. As a result, been combing of this Council, but can't really find something sufficiently specific for this problem. Or if it's here, Miss me him! For any help would be appreciated, I wish you my songs back! I tried to play off of windows media and hard drive also.
BTW, I'm the old lady of 58, so, could you young computer scientists Genesis keep it as simple as possible! Please, I beg you! Thank you very much!!
Hello
1. what Media Player do you use?
Try and proceed as described in the link.
How to fix sound problems in Windows XP:
-
Hello friends,
I have two user accounts on my pc. Is it possible to run the same application (for example: DEFRAG or disc cleanup utlities) for two users at the same time? I mean, these utlilities work by all of the computer or user account? That would mean the same application to perform for a single user in the background and foreground to the user, or I'm totally lost in space?
Thank you for your comments
You should run Disk Cleanup in each user account. Do not try to shut it down or change user when defragmentation; system files may be damaged. You must stop the defragmentation, log off, restart the defragmentation and don't really no point for it. MS - MVP - Elephant Boy computers - don't panic!
-
Mr President.
My worm jdev is 12.2.1
How to enter two rows at the same time with different default values that only the first line to use see?
Suppose I have a table with four fields as below
"DEBIT" VARCHAR2(7) , "DRNAME" VARCHAR2(50), "CREDIT" VARCHAR2(7) , "CRNAME" VARCHAR2(50),
Now I want that when I click on a button (create an insert) to create the first line with the default values below
So if I click on the button and then validate the second row with different values is also inserted on commit.
The value of the second row are like the picture below
But the second row should be invisible. It could be achieved by adding vc in the vo.
The difficult part in my question is therefore, to add the second row with the new default values.
Because I already added default values in the first row.
Now how to add second time default values.
Concerning
Mr President
I change the code given by expensive Sameh Nassar and get my results.
Thanks once again dear Sameh Nassar .
My code to get my goal is
First line of code is
protected void doDML(int operation, TransactionEvent e) { if(operation != DML_DELETE) { setAmount(getPurqty().multiply(getUnitpurprice())); } if (operation == DML_INSERT ) { System.out.println("I am in Insert with vid= " + getVid()); insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE", (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100)); } if(operation == DML_UPDATE) { System.out.println("I am in Update with vid= " + getVid()); updateSecondRowInDatabase(getVid(), (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100)); } super.doDML(operation, e); } private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5) { PreparedStatement stat = null; try { String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " + "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } } private void updateSecondRowInDatabase(Object value1, Object value5) { PreparedStatement stat = null; try { String sql = "update vdet set AMOUNT='"+ value5+"' where VID='" + value1 + "'"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } }
Second line code is inside a bean method
public void addNewPurchaseVoucher(ActionEvent actionEvent) { // Add event code here... BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry(); DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator"); RowSetIterator rsi = dciter.getRowSetIterator(); Row lastRow = rsi.last(); int lastRowIndex = rsi.getRangeIndexOf(lastRow); Row newRow = rsi.createRow(); newRow.setNewRowState(Row.STATUS_NEW); rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow); rsi.setCurrentRow(newRow); BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry(); DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator"); RowSetIterator rsi1 = dciter1.getRowSetIterator(); Row lastRow1 = rsi1.last(); int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1); Row newRow1 = rsi1.createRow(); newRow1.setNewRowState(Row.STATUS_NEW); rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1); rsi1.setCurrentRow(newRow1); }
And final saveUpdate method is
public void saveUpdateButton(ActionEvent actionEvent) { // Add event code here... BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry(); OperationBinding commit = bindingsBC.getOperationBinding("Commit"); commit.execute(); OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit"); operationBinding.execute(); DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef. iter.getViewObject().executeQuery(); }
Thanks for all the cooperation to obtain the desired results.
Concerning
-
two microphones at the same time (hearing CC)
Hello, it is possible Records two microphones at the same time? in hearing CC... I have two USB microphones, but only lets me put a default value.
You have just to face why I always recommend against USB microphones for something else that the simple, single microphone, no request for surveillance-style. For anything else, you would have been better with a couple of microphones XLR and a basic USB interface. This is not a hearing problem... most of usb microphones just use the Windows Audio drivers and that is what limits you to a single microphone.
You MAY be able to do this work by downloading ASIO4ALL ASIO4ALL - universal ASIO Driver universal driver and this aid instead of the Windows Sound drivers. It takes some fiddling and while reading the instructions. Otherwise, I've also heard people using a cable Audio virtual Virtual Audio Cable Home Page to achieve the same thing - but beware, it is NOT free and takes a lot of detailed configuration.
Me? I'll find someone who wants to buy two second-hand pickups USB then put money into two USB microphones and a basic interface to both channels. Despite the assertions of 'plug and play', it would be much simpler (and flexibility) as soon as you want to do more than using a single microphone.
Maybe you are looking for
-
I have 4 email address in Thunderbird. How can I add a password for the fourth? It is easy to remove, but I do not know how to add or change. My provider is TurnkeyMail. They say they do not know how to help me and I have to ask to Thunderbird.
-
How can I turn off message blocking on iPhone 5s.please be spacific.
How can I disable blocking messages on iPhone 5 s?
-
How can I disable Firefox to save the password
-
3011G satellite freezes the recovery running during the formatting process
I work in a computer shop, but I think it's better to try to post here and hope for the best, but to send the computer. I'm working on return to Toshiba as DOA. Basically, the problem is, when I run the restoration, the computer crashes during the fo
-
vulnerability in cursors animated after upgrade to vista
Hello recently I have been upgraded from vista to windows 7 and I read about a "cursor animated remote vulnerability of windows runtime code" that affect users of vista. (vista users already enjoy a http://www.microsoft.com/downloads/en/details.aspx?