View PC ceased to recognize the microSD card

Hello

I looked around, the Forum but could not find a similar problem posted, so here goes: since a week I think 32 GB and my laptop (Win XP) ceased to recognize my 8 GB Sandisk card in my player. The laptop sees nothing and the view it but claims that there are 0 KB capacity on the map. I had filled to the top of the map (and the player) to approximately 80% with music using the MTP, and until about a week ago everything looked & sounded perfect.

Is there anyone who can help me? Is it a hardware problem (with drive or card)? Or I can press some buttons and repair this?

Just for the record: I bought a new microSd card (Kingston) and the view has no problem reading this one, so I guess it was the card that is faulty. In any case: problem solved (for now).

(by the way: I wrote a request for support to [email protected] and [email protected], but (a week later) never received feedback, not even an automated response...)  So much for the customer support of Sandisk...)

Tags: SanDisk Sansa

Similar Questions

  • Tecra M5 - wattmeter has ceased to recognize the main battery

    The wattmeter has ceased to recognize the main battery, although it recognizes and reports on the secondary (the one that replaces the CD player). The led records as the battery is present and if it is fully charged on no.

    Any suggestions?

    Sorry mate but which laptop model you have exactly?

    What system is currently running?

    Did you install updates that could affect the State of the battery?

  • Portege R700 - Autocad 2011 does not recognize the graphics card

    Hello

    I have toshiba Portege R700 with 64-bit win 7 installed.
    I need the computer for use with autocad 2011.

    For some reason any auocad does not recognize the graphics card installed on the computer.
    I suspect it because very little memory is allocated for the graphics card.

    How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

    Thank you very much!

    Hello

    What Portege R700-xxx you have exactly?
    As far as I know the graphics memory cannot be assigned manually.
    Everything is controlled by the graphics driver and you have no influence on this

    You can try updating the graphics card driver maybe it would help.
    The most recent driver found on the page of the European driver Toshiba
    If not, you should check the manufacturer of the graphics chip driver

    Good luck

  • Equium A210-1AS - Windows7 does not recognize the sound card

    Since the upgrade to windows 7 programs do not recognize the sound card.
    My laptop is Toshiba equim A210-1as.

    The sound is ok on the speakers.
    Any help would be appreciated.

    I downloaded the last Reatek'a drivers and install them.

    Concerning
    Mike

    Hello

    I think you didn't use the right card driver

    The sound chip comes from Realtek and you need to reinstall the Realtek audio driver for the audio.

    Check this box!

  • Satellite A110-294 does not recognize the wireless card

    Hello

    the question is:
    Why my Satellite A110-294 does not recognize the wireless card?

    I re - install Xp PRO with all the drivers.

    I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

    I don't understand, can you help me?

    Thank you
    André

    Hello

    To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

    You can find the latest driver for Atheros WLan here:
    http://APS2.toshiba-tro.de/WLAN/

    Just a question;
    You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
    The driver is missing, then the device must be marked with a yellow exclamation point

  • 5 c does not recognize the sim card

    I got a plan on the development of media and 5 c. Phone is unlocked and now does not recognize the sim card. What should do?

    What is the error message you get?

  • T440p - Ericsson N5321gw does not recognize the SIM card

    Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!


  • Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

    Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

    I Don' t know what to do, help me please

    You get an error message?

    What did he say?

  • Media Player 11 has ceased to recognize the media information for any CD in the drive - can it be fixed?

    Media Player 11.0.6002.18311 has ceased to recognize the information on the media for any CD in the drive, even for those it has previously "known".  Also, it does not update media information, even when I manually to find the news media.  Is it possible to reset the media player or uninstall it please?  Thank you, Ralph (UK).

    Hi Raoul,.

    the manual update must have worked in discovering that the CCGD website is down.

    I advise to use the link below to post in the community of Windows Experts. As the title suggests, this community manages more advanced issues.

    http://experts.Windows.com/FRMS/default.aspx

    calculation of the happy,

    B Eddie

  • Windows Vista does not recognize the graphics card and the broadband

    Original title: recognize the graphics card and the broadband connection

    Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

    Hi mfadhelmu,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. you receive messages or error codes?

    4. have you updated all device drivers?

    You can try to launch the Fixit and see if it helps:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

    Original title: peripheral equipment

    An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

    Thanks for your help.
    Christine.

    Hi Stefano,

    Thanks for posting your question in the Microsoft Community.

    This problem can be caused if the SD card is damaged or the card reader may not work properly.

    1. What is the brand and model of the SD memory card?

    2. What is the number of the model of the Packard Bell laptop?

    3. you receive an error code or the message after inserting the SD card into your laptop?

    4. have you made any recent hardware or exchange of software on your computer before the show?

    5. have you tried to insert different SD card in your laptop?

    6. have you checked the SD card in another computer?

    7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

    8. is the specific question to a SD card or any type of cards?

    9. are you able to detect the SD card in the Device Manager?

     

    Open the Device Manager:

    http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Open the hardware and devices Troubleshooter:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

     

    For reference:

     

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • BlackBerry Smartphones my Storm does not recognize the SD card

    Hi everyone, I just got the BB 9530 Tower in tampa, Florida, and now I have my home land. So my BB cannot recognize the SD card, even if I try to ROM and ROM, and I can read my SD of the card reader for PC. I had another SD card is used as a good of an another BB and connect on the phone 9530.My BB still does not recognize SD card with notify optional---> MEMORY "A MEDIA CARD IS NOT CURRENTLY INSERTED in the DEVICE. I activate all the card carrier, Mass storage Mode supports, enable Auto Mass... is running

    I don't know what I'm doing now, and I think my DD not damage

    Thanks for the support

    My PIN: 304C26D3

    IMEI: 359483.02.293455.3

    Cool!
    I'm glad that you fixed it.
    Please solve the thread so that others can find your answer faster.
    Thank you

    Bifocals

  • I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader.

    I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you

    Run Windows Update - it may install drivers that does not get installed on Windows 7 home.

    If this does not help, look for Windows 7 drivers for this device on the Sony web site.

  • HP HP Deskjet 4400 w/proper cartridges ceased to recognize the color cartridge. Nothing helps. :(

    Out of the blue, it just ceased to recognize the color cartridge has been installed, to give me the 'E' in the first window of the printer. In the second window of the printer, it is the icon of the levels of two ink with a flashing color, blank display, with an arrow pointing to it. I tried ALL steps suggested, by removing and reinstalling, cleaning the drive cartridge and printhead into the printer as shown, installing a new cartridge. I even uninstalled and reinstalled the software! Once in a blue moon, during several removals and reinstallings of the cartridge, it will record long enough to print a document, and then it returns to the same error message. It's just over a year (so, of course, the warranty has expired :-{) and I am at my wit's end! Help, please!?
    Note: The cartridge first, this has happened with was about 1/3 full when the problem started (or ink levels told me til now and every time she recognize it thereafter, but briefly. With the new cartridge, it always does the same thing, only show the cartridge as full when it recognizes, but I can't even have her now! :-{

    It looks like the sensor that detects that the ink cartridge is off. I'm afraid you need to replace the printer.

  • Moto Q does not recognize the memory card

    I just added a 2 GB memory card that is approved for the Moto Q 9 M... For some reason, my phone does not recognize the memory card. In the memory section it shows the card is unknown.

    With a previous discussion, I saw, I did add the memory card on my PC. It does not recognize the card... Any ideas?

    Thank you

    Jason

    Try formatting the card on your pc and then install it on the phone. If it's 2 GB sandisk it should work fine. If the phone or the card is left. Sometimes reformat card strives to set everything right.

Maybe you are looking for