BlackBerry Smartphones my Storm does not recognize the SD card

Similar Questions

• BlackBerry Smartphones Media Manager does not recognize the Media card

  Installed the media 2G card.  Card is able to format and presents itself as 1.8 GB.  With mass storage, office software (Roxio media manager) does not show - memory card from the device.  In mass storage mode (which, according to the manual means the acts of the device as a USB storage device), PC sees the device, but does not not the files copied to it.  Has spent about 2 hours with the technical support of Verizon... they are puzzled.

  I found a workaround for the music files on the card.  I removed from the Blackberry and installed in an SD adapter full-size and there in a USB key with a SD slot.  My computer has seen the media card (embedded in the USB device) and I flew over songs in the repertoire of music on the media card, put it back into my phone and viola... the music file was there!

• BlackBerry Smartphones windows 7 does not recognize the device

  I was connected my 8330 for a desktop XP for a long time.  The sw of the device is v4.5.0.175.  I recently got a new Lenovo T410 laptop, running Windows 7.  I downloaded the software (version 5.0.1) DM and checked my camera SW is updated, but the laptop is still not recognize that the device is connected (via USB).  I tried all ports USB on the laptop and also followed all the steps detailed in KB13146, with no luck.  I find nothing in any of the forums that refer to Windows 7.  Can anyone help solve this problem?

  Hi and welcome to the Forums!

  Here is the list of troubleshooting atricles... I hope that something will be useful:

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  KB02640 Troubleshooting USB connections
  KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  KB01451 How to enable Sync advanced logging if a wired synchronization fails
  KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. I can attest that DTM does not indeed a BB under Win7... mine is exactly so.

  I hope that something it is useful!

  See you soon!

• BlackBerry Smartphones Windows XP does not recognize the reader of BB

  I installed the BB Device Manager and its 'connected '.

  However, when I open windows Explorer, it shows 2 drives E: and G: and when I click on it it says "insert disc". I can't copy all of the files for them.
  Thanks, Wayne

  Hello and welcome!

  E and G drives are new since the addition of the storm in your system? And they do not exist when the storm is not connected? Check on the storm (Options > memory) to be sure, this mass storage Mode is active and auto-permis. Restart the PC (and possibly the storm). Plug back in and see if it clears.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• 5 c does not recognize the sim card

  I got a plan on the development of media and 5 c. Phone is unlocked and now does not recognize the sim card. What should do?

  What is the error message you get?

• T440p - Ericsson N5321gw does not recognize the SIM card

  Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!

  
  

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

  Original title: peripheral equipment

  An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

  Thanks for your help.
  Christine.

  Hi Stefano,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the SD card is damaged or the card reader may not work properly.

  1. What is the brand and model of the SD memory card?

  2. What is the number of the model of the Packard Bell laptop?

  3. you receive an error code or the message after inserting the SD card into your laptop?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you tried to insert different SD card in your laptop?

  6. have you checked the SD card in another computer?

  7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

  8. is the specific question to a SD card or any type of cards?

  9. are you able to detect the SD card in the Device Manager?

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  For reference:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Moto Q does not recognize the memory card

  I just added a 2 GB memory card that is approved for the Moto Q 9 M... For some reason, my phone does not recognize the memory card. In the memory section it shows the card is unknown.

  With a previous discussion, I saw, I did add the memory card on my PC. It does not recognize the card... Any ideas?

  Thank you

  Jason

  Try formatting the card on your pc and then install it on the phone. If it's 2 GB sandisk it should work fine. If the phone or the card is left. Sometimes reformat card strives to set everything right.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• BlackBerry Smartphones clerical error: does not recognize internet connection

  When you use Blackberry Desktop, I get an error message when I run a module, e/g, synchronization, I need to be connected to the internet.  The dialoge box asks if I want to cancel or restart.  New attempt to strike does not change the result.  I am connected and B Desktop does not recognize the connection... This also happens with the module used to move data to another blackberry or other pda.  ??? Help!

  Hello

  Sorry, it has not worked for you,

  I am pleased that you are running.

  We will solve this thread, you can

  Open another if you need anything whatsoever.

  Thank you

  Bifocals

• Satellite L655 sometimes does not recognize the wireless card

  I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

  The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
  Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

  Under network card it has only ethernet. Its as if it does not exist.
  Basically the way to solve this problem is by restarting simply my computer until he figures it.
  Sometimes, it can take 5 or more times.

  Any help please?

  Hello

  What satellite L655-xxx you have exactly?
  As far as I know there are different models with different wireless network cards.

  Your BIOS is up to date? Please check this box.

  So now to a few proposals of solution:
  First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
  In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx