View the data in different data control

Similar Questions

• Why fields view object cannot display in the data control?

  Hello
  Work in jdev 11.1.2.3.0.
  I create two objects from view of the entities under the project module.
  and see the AppModule.xml as follows:
  ..
  < ViewUsage
  Name = "TransAccountVO1".
  ViewObjectName = "Project1. TransAccountVO "/ >"
  < ViewUsage
  Name = "TransAccountBillVO1".
  ViewObjectName = "Project1. TransAccountBillVO "/ >"
  ...
  Under the control of data panel shows these two nodes:
  -TransAccountVO1
  -id
  -name
  ---..
  + Operation
  + Named criteria
  
  -TransAccountBillVO1
  + operations
  + Named criteria,
  
  THE first node is ok, but the second miss (node TransaccountBillVO1) areas.
  Why fields view object cannot display in the data control?
  
  Thanks in advance.

  delete and Add again... the value editable forever.

• On the forms send us and receive in return, data in the form of fields will be not print.  We can view the data, but the fields to print Virgin.  How can I fix it?

  On the forms send us and receive in return, data in the form of fields will be not print.  We can view the data, but the fields to print Virgin.  How can I fix it?

  OK, it's different. These text boxes are (at least engineering point of view) not considered form data, they are annotations (or markup). On your print dialogue box, you will see a group of "Comments & Form". Make sure that the first control is set to "Document and annotations:

  

  After this change, you should see the markup of your impressions.

• Client interface methods not found in the data control

  Hello

  JDev 11.1.2.4

  I exposed some methods by including them in the client interface of my module of the application. I tested the app module and I can call methods. I refreshed the data control, but I do not see the data control methods. I have several other client application with interface module and I can see the operation. I only have the problem with this module of the application.

  Any ideas?

  Thank you

  Close jdev, delete the folder the model project of the module of the application classes and the classes folder of the project view controller where you want to use the datacontrol, start jdev, recompile the project model (and deploy the lib, if you use the library), recompile the view controller and finally see if you see the methods in the datacontrol.

  Timo

• Refresh of Page partial update of form before the data control returns the new value

  Hello
  
  I have a set of paintings of master detail based on a single data source (Session Bean encapsulating a web service call). The high-level table (t1) shows data of opportunity, as the low level (t2) poster contacts for a special occasion. When the opportunity is selected in t1, the contacts associated with this opportunity appear in t2. These tables of work as you wish.
  
  I have a read only form (form of the Panel layout) based on a different data control (supported by a Session Bean that calls a LinkedIn API and a table of database using EJB3 entities). LinkedIn Session Bean method takes a parameter which I get from the current row in t2. (#{bindings.relatedContact.currentRow.dataProvider.id}) I put the PartialTriggers as 't2' on the form.
  
  When the page is loaded for the first time, the first line (line A) from table t2 is selected and the display shows the data associated with this line. If I select another line (line B), the Session Bean is called with the value of the id of the newly selected row, but the display will show the associated data from line A. Thereafter, whenever I select a row in t2, bean is called with the new value, but the form displays the data from the selected line previously.
  
  I guess what happens is that the form is refreshed (using stale data in the data control), and then the call to the session bean is made. I checked using thread and print statements. Sleep() in the bean.
  
  Is this a correct behavior and how can I make sure that the call to the bean occurs before the form is updated?
  
  I use JDeveloper version 11.1.2.2.0
  
  Thank you
  Michael

  Hello

  as answered on StackOverflow, the trick is to set the refresh option on the iterator (s) to the second access WS (table 2) of PageDef on ifNeeded. The default setting is delayed, which in your case is not optimal because refresh occurs during rendering response, which is too late for the access of WS. Try "ifNeeded.

  Frank

• create the data control using ejb deployment

  Hi guys
  I am a "newbie" in Jdev 11 g and have the following question. Perhaps his simple, but I need help and someone pointing me in the right direction...
  If the session bean is created by another application, how can it be used to create the data control in another application?
  "ReferenceService"-> application of the referencesrvSessionBean
  -> Applications "forms" contains all jspx pages, etc. How to create a control of data here, to the use of the sessionBean in the other application?
  Help, please!
  :(
  
  Published by: 787883 on October 5, 2010 09:26

  It's very simple, when you are in the application that has your view layer, have to drop-> open and locate the jpr for your EJB project file.
  This will open the project and add it to your application.
  Then you can go in for your project to view preferences and under dependencies set up a relationship between the projects.

• How to create the data control to a custom object of sale cloud using web service.

  Hi all

  I'm working on a requirement I need to display the common custom object data and their children object. After the display of the data user will be able to select multiple records by using the check box and then update the State to close.

  So basically, I need to create a table in which the data will fill with the checkboxs and when the user clicks on the button update then I need to update a field in the parent object.

  Any help would be appreciated.

  Thank you

  You must follow the steps below

  1. right click on the template project, select the new option

  2 Select the data control in the left hand side of the tab "All Technologies"

  4 Select "control of data from the Web Service" in the right side panel

  3. Enter the name of the data control (custom name)

  4. provide your WSDL to the URL https://crm-domain.oracleoutsourcing.com/foundationCustExtn/CrmCommonReferenceService?wsdl

  5. click Next, next if all methods to winow than wsdl, mix to the right and click Finish button

  6 refresh "data control" in your right side panel to request

  7 expand control of data and select only control data that you have already given

  8. then you can see the methods that comes from your wsdl.

  9. Select the method and expand it, you will get the return values

  10. drag and drop the return as a table value, you will get the af:table on the page

  11. don't want to operatet this table.

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• Cannot find the data control to the Web Service in the Menu

  Hello
  
  I try to call a web service in the ADF. To do this, I want to create a web service data command
  
  If I understand correctly, if I right click on the template project, I see the data control from the Web Service under layer Business > Web Services. (as indicated in 2.1 Sec-http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html#WsProxyPojoControl)
  
  However, I am not able to find this entry in there.
  
  I tried the following things:
  
  I tried with Jdev 10.1.3.5, 10.1.3.4 and 10.1.3.1
  I tried to select all available models of technology to create applications
  -Any model
  -Web Application [JSF, EJB, Toplink]
  -Web Application [JSF, ADF]
  -Web Application [JSF, EJB
  -Web Application [JSF, Struts, ADF]... .and everthing else...
  
  I still don't see the web service proxy.
  
  Then I opened the ADFToystore sample application, and I could see the service data Web controls here!... .that mean my jdev is not defective... something else is missing.
  
  So, I tried to see what libraries are selected... I saw that a library named 'Web Service Data Control' are there in the project, which is not there in the model applications project that I created. So I added this library to the project, but it still does not work...
  Next, I added all THE libraries I have seen in the libraries in the project properties section... still no luck
  
  I don't know I'm missing something basic. Can someone please help.
  
  Rgds,
  Amit

  Hi Amit,

  try to set the filter above in New Gallery to filter by: all Technologies

  Kind regards

  Branislav

• ADF Mobile Page with the data control of Web Service not showing latest results

  Hello

  I developed a simple mobile application of ADF. It has two functions members and subscriptions. These two pages are part of my Taskflow. On the members page I show all members in a list by using the Web Service method data Find command. In the list item have a listener property Set where I'm storing MemberId in a variable of pageFlowScope for action. On the subscription page, I have a bar graph that gets the data with the help of a Find method in control of data to the Web Service. The find method is based on a view created criteria which has a member ID of input parameter. in the model of ADFBC project. I connected the variable using the AMX page binding. The variable is being levied on the pageFlowScope variable.

  The page displays the chart first to a member. And shows the same graph for the other members. I printed the memberId variable and it shows the value of the respective members. But the cards are not get updated every time I select new Member.

  I use JDeveloper 11.1.2.4.0.

  Any suggestions?

  Thank you

  Mehabub

  Go to the Connections tab, and then click the Green plus sign on the central section - you need to add a 'invokeAction. Give it a name, and then select the iterator that built the table, and that's all you should have to do. The invokeAction fires whenever you visit the page and should update the list.

  Rich,

• How to view the data in the text file to the format column

  Hello

  I am acquiring data from an oscilloscope.

  Wen I save the data in a text file to aid wite spreadsheet string, all the displayed voltage values r first, then values of time... in addition to its delimited by tabs

  How can I view it like the r of time values in a single column and the voltyage of the r-values in the other column

  thanx

  Hello

  I don't know what is exactly the format that you found. I think you should try to use the function Array transpose (from the palette of function table) before you pass the array to write to string of spread sheet function or directly loyal to Terminal son transposes on writing worksheet function and see if you get the desired results.

  PS. : Share your code would be appreciated.

  Kind regards

  Amine31

  (Kudos are always welcome, mark it as a solution if it is the only)

• Can I use scan interface mode during the collection of the data of cRIO? How to view the data collected continuously on a waveform graph?

  Hello

  I intend to use cRIO as a standalone device to collect certain data off a tachometer House.  My goal is to store the data in the cRIO chassis, since it has its internal memory, but I can't even a cluster of data of the analog inputs of its devices.  I dragged and dropped the channel I collect data in a while loop, but it is only a point.  I want to see the data from the different time, what should I do?  Is this possible in Mode Interface Scan?  If Yes, could someone give me a simple example that shows streamed on a waveform data?  I would be very grateful!

  
  

• Currency of line to the data control Bean

  Hello

  JDev: 11.1.1.7.1

  We have created a list of POJO Bean data control. This has been used as a table. An iterator has been created on the pagedef on control of bean data.

  What we observe is that the table selection listener is unable to choose, because there is no change of line. Any suggestions on the best practice to keep currency row for control of data iterators based Bean?

  Timo - one of the members of my team found a nice feature to add the primary key to a bean datacontrol.

  https://docs.Oracle.com/middleware/1212/ADF/ADFDC/struct-configuring.htm#ADFDC901

• Customer connection remains for the data control

  Hello

  I ve recently created an ejb rest aplication consequence with the tutorial of:https://blogs.oracle.com/imc/entry/building_simple_java_ee_rest

  It works perfectly in factor.

  Now, I want to create the client application.

  I started to make adf web application, and in the template project, I want to get the webservice through the connection still to expose it as a datacontrol to user interface layer.

  However, I m in web service data to create order Wizard, in the first step, create the connection REMAINS, I put endpoint URL: "the url I get when deploy the web service application" but when I test gives:' error received: forbidden ' or if I put the url of a method: ' received error: the source cannot be found.'

  How can I fix it, please.

  Thanks in advance.

  Carlos

  Your REST is back JSON or XML.

  The REST data control now supports only the XML responses.

  Here's a demo of use basis:

  https://blogs.Oracle.com/Shay/entry/accessing_remote_databases_from_oracle

  If you return JSON, at this point, you create a Java class that parses the JSON and then to expose this class as a data control.

• Select multiple choice based on the data control does not not value in the correct form

  Hello, I am using JDeveloper 12.1.2

  I made a choice of several select based on an attribute of the year to a data control and I have a method in my managed bean that retrieves the selected values in the select choice of many, and on the basis that I want to do some queries, but the value that returns the selection is not the value of the attribute is the value of memory (or what is the correct value name..)

  Here is the code:

  < af:selectManyChoice value = "#{bindings." Label AnoList1.inputValue}' = 'Ano '.

  ID = "smc1.

  valueChangeListener = "#{OBIEE_managed_bean.» AnoListSelection}.

  autoSubmit = 'true '.

  Binding = "#{OBIEE_managed_bean.anoListBinding} '"

  immediate = "true" >

  < f: selectItems value = "#{bindings." AnoList1.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." AnoList1.validator} "/ >"

  < / af:selectManyChoice >

  Managed bean:

  public void AnoListSelection (ValueChangeEvent valueChangeEvent) {}

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  try {}

  System.out.println ("Valor link yearChoice:" + anoListBinding.getValue () m:System.NET.SocketAddress.ToString ());

  ...

  The output is as follows:

  Valor link yearChoice: [Ljava.lang.Object;@4939cade

  Year: Ljava.lang.Object;@7135da60

  This normally happens when the toString is not defined, but how I have to fix this? Someone at - it had the same problem? Any advice?

  Kind regards

  Frederico.

  Hi Frederico

  I'm fine hope you are too.

  Sorry, but you can try

  {for (Object item: (Object []) {valueChangeEvent.getNewValue ())}

  System.out.println (Item.ToString ());

  }

  This should give you something.

• view the data in SQL

  I was able to use ASP to retrieve data from SQL database by using something like the one below:

  SQL = "SELECT PageName",

  SQL = SQL & "CONVERT (NUMERIC (6,2), AVG(Rating * 1.00))" AVERAGE ".

  SQL = SQL & 'COUNT (Rating) AS Total',

  SQL = SQL & "SUM(CASE WHEN Rating = 1 THEN 1 ELSE 0 END) AS [Star1Total]"

  SQL = SQL & "SUM(CASE WHEN Rating = 2 THEN 1 ELSE 0 END) AS [Star2Total]"

  SQL = SQL & "SUM(CASE WHEN Rating = 3 THEN 1 ELSE 0 END) AS [Star3Total]"

  SQL = SQL & "SUM(CASE WHEN Rating = 4 THEN 1 ELSE 0 END) AS [Star4Total]"

  SQL = SQL & "SUM(CASE WHEN Rating = 5 THEN 1 ELSE 0 END) AS [Star5Total].

  SQL = SQL & "FROM [SDBI]. [dbo]. [GnieRatePage] "

  SQL = SQL & "GROUP BY PageName".

  SQL = SQL & "ORDER BY PageName".

  I then post on the help page:

  Response.Write ("PageName") Recordset

  What I need, it of to transmit these data to Flash and let Flash to view the coast. How to do by way of ASP?

  Thank you

  I don't use the proper syntax for writing couples variable/value with asp, but, if this is the case, use:

  var myTextLoader:URLLoader = new URLLoader();

  myTextLoader.dataFormat = pouvez;

  myTextLoader.addEventListener (Event.COMPLETE, onLoaded);

  function onLoaded(e:Event):void

  {

  for {(var s:String in e.target.data)

  trace (s, e.Target.Data [s]);

  }

  myTextLoader.load (new URLRequest ("read_page_rating.asp"));