view the log by using the time field a date of last year start date

Similar Questions

• Try to set the time to a date field

  Hello

  Using jdeveloper 11.1.1.6.0.

  I have a date field in my table. I got the time string and convert it to a date field.

  	String dis1 = theToken;   for example: 11:15:26 DateFormat = formatter1 new SimpleDateFormat("hh:mm:ss");
  	Date2 date = formatter1.parse (dis1);
  	rw.setAttribute ("TtAlertRecTime", formatter1.format (date2));

  While my running page and press that values have not been set for the field.

  In the page of the user interface

  < af:inputDate value = "#{row.bindings.TtAlertRecTime.inputValue} '" label = "#{bindings." TrackTicketsView1.hints.TtAlertRecTime.label}. required = "#{bindings." TrackTicketsView1.hints.TtAlertRecTime.mandatory}. shortDesc = "#{bindings." TrackTicketsView1.hints.TtAlertRecTime.tooltip}. ID = "id21" > < f: validator binding="#{row.bindings.TtAlertRecTime.validator}"/ > < af:convertDateTime pattern = 'hh '. type = 'time' / > < / af:inputDate >

  My Question is

  How to set the time in a date field? time is obtained as a string.

  Kind regards

  Prasad K T,.

  AS400 ops.

  well you can not set the time in the date field.  the date data type allow only data in a specified format before. It is designed like that.  If your issue is resolved now?

• I am a student and I noticed that the amount of my renewal is about £30 more than it should, however, on the Adobe site, the packaging is the same price as it was last year, why am I being charged more?

  I am a student and I noticed that the amount of my renewal is about £30 more than it should, however, on the Adobe site, the packaging is the same price as it was last year, why am I being charged more?

  I really have enough because it's my budget next term as my deposit is taken.

  The first year of purchase still has the promotional prices, price changes when annual contracts ends.

  Concerning

  Stéphane

• How to view the "timer" current user time

  Hello

  How to display the "timer" right now?

  Currently I have in my program using timer, how to display the current time left on the timer to warn the user the time left on the timer?

  The number of timer upward or the countdown?

  using TimerCB

  a Council does

  Thank you

  Ben

  I'm not aware of the possibility of obtaining the hour up to what a timer callback will be called, then I would say a different approach:

  If, say, you want some action to happen every 10 minutes, but I would like to update the user interface of every second indicating the remaining time I would set the timer to 1 s interval. In the reminder of the timer, I would use a setting that is incremented each time the callback is called; If this value reaches 60 x 10 I reset the parameter and call the function to get the job done. In all other cases, you can simply view 600 - setting (in seconds) than the rest of the time.

  An alternative may be to use two counters, one for the action, called every 10 minutes, and one for the update of the UI, called say every second...

• How the taskbar to view the Long format of Date and time? I know that I can click to see, but I want it appear constantly.

  Can someone guide me through these steps.

  1. right click on the bar of tasks then UN -lock the taskbar if there is a tick against this setting.

  2 place your cursor on the top edge of the taskbar until it turns into a two-headed arrow, and then click on & made drag as if you were dragging the edge of any window.  By making the taskbar more fat, you will see the format switch to a view of three lines: hour, day of the week, short date.  This is the best that this point can do on its own, so I don't think it will satisfy you.

  3 you can then upgrade by clicking on the time in the taskbar, click on change date & time..., Date & time tab, click change date, time, Date & settings dialog box, click on change the calendar settings, in the entry for the short date format, enter what you want as DD MMMM yyyy then OK OK, OK, OK.  The taskbar happily modified displays short date in the format.

  4 you can easily try then reset then using the reverse procedure, if you decide that the display of three lines is worse than any date not having do not at all.

• View the time remaining smart

  Hello!

  To recognize the users of my site on the remaining duration of their sessions, I display a countdown in seconds.

  But it's not very smart...

  How can I display the remaining time in minutes and seconds?

  (the sessions are limited to 30 minutes)

  Type of display I want to use: 16:39

  This is the code I use:

  County = 1800;

  myCountDown = function () {}

  County;

  };

  countInterval = setInterval (myCountDown, 1000);

  onEnterFrame = function () {}

  countDownFld.text = count;

  If (count == 0) {}

  clearInterval (countInterval);

  < action >;

  < some another action >;

  }

  };

  Thank you very much in advance for your help!

  If you have seconds and that you want to display the minutes and the seconds, and then you do a little math.  If you divide the number of seconds by 60 you get the number of minutes.  If you take the module of the 60-second, you get the number of seconds.  So just use these two calculations to ge6t minutes and seconds and display them in a textfield.

  var minutes = Math.floor (count/60);

  var seconds = number % 60;

  countDownFld.text = String (minutes) + ":" + String (second);

  and if you want to display zeros, you can do a conditional check to see if the numbers are< 10="" and="" append="" them="" to="" a="" "0"="" if="">

  If (seconds< 10)="" seconds="0" +="">

• In the time field calculation

  Need to calculate the values of A and B
  
  Formula->
  
  A = turn down [A_TIME - A_STD]
  
  B = Round-up [A_TIME) - 10 minutes + A_STD]
  
  
  where
  
  A_TIME VARCHAR2 (8) N hour (Format"" hh: mm AM/PM ") for example"15:50.
  A_STD VARCHAR2 (5) N Standard time (Format"" hh: mm ") for example"01:00 ".
  
  
  Allowed values for A and B after round up/down = multiple of 10 (11:00, 11:10, 11:20 etc.)

  Hello

  user3709609 wrote:
  ... can you please explain the below line of code

  To_char (TRUNC (SYSDATE) + ((RONDE (t_minutes + s_minutes-5.01,-1)) / 24 / 60), "Hh: mi AM")

  for the Round up [A_TIME - 10 minutes + A_STD]

  I find it easier to understand phrases like that when I read them from the inside.
  t_minutes is a whole number of minutes after midnight, for example 230 (i.e. 03:50).
  t_minutes + s_minutes is the last time not rounded, also an integer
  t_minutes + s_minutes - 5.01 is 5 minutes and a small part of it, before. Why we are subtracting 5.01 rather than 10 will become clearer in the next step.
  ROUND (t_minutes + s_minutes - 5.01, - 1) is the previous sum rounded to the nearest multiple of 10 (for example 21 would be rounded up to 20). We want to round up to the higher multiple of 10 (21 would be rounded up to 30), which is almost the same as the addition of 5 and then rounded up to the nearest multiple, except if the original number is already a multiple of 10. For example, if t_minutes is 230 and s_minutes 60, so we want to 230 + 60 - 10 = 280, but TOWER (230 + 60 - 5-1) (i.e., ROUND (285, -1) is 290, because ROUND always rounds away from 0 when multiple "nearest" is ambiguous.) This is why we need this tiny part; So instead of tounding 285 to the nearest 10, we are rounded 284.99, and the 10 closest is unambiguous: 280. This fraction fraction significance only when the value of the integer ends with 5.
  ROUND (t_minutes + s_minutes - 5.01, - 1) / 24 / 60 is the number of minutes, converted to a number of hours, as ago 24 hours per day and 60 minutes per hour.
  TRUNC (SYSDATE) + ((RONDE (t_minutes + s_minutes-5.01,-1)) / 24 / 60) is that the number of days after midnight today.
  To_char (TRUNC (SYSDATE) + ((RONDE (t_minutes + s_minutes-5.01,-1)) / 24 / 60), "Hh: mi AM") is from this point in time, in ratings "Hh: mi AM ', for example ' 04:40 '. Oracle dATEs always include year, month, day, hour, minute and second. In this case, we are only interested by the hours and minutes, but to use TO_CHAR set a number of minutes in the desired format, needed us a DATE out of it, which is why, in the last two stages, we converted a number of minutes to several days and then added this number at midnight on a day. Since we are ignoring the year, month and day, it didn't matter that day, we used; Today it happens to be convenient.

  As I need to work to

  Round [A_TIME]
  Gather also [A_TIME]

  The rounding down modes, use the previous expression as your model:

  ,       TO_CHAR ( TRUNC (SYSDATE) + ( TRUNC ( t_minutes - s_minutes
                                               , -1
                                 )
                            / 24
                            / 60
                            )
              , 'HH:MI AM'
              )          AS a
  

• Convert the data to the time field of FFT

  I have a .tdms of signal data file EMG, signal represented by the number of samples and amplitude (data 24 bits). I want to perform this signal in a time domain analysis spectral EMG signal.
  I look forward to help me continue my project.

  I send all write file file and read the EMG signals signal

  Thank you very much.

  P/s: reading EMG Signal read data file sEMG_1.tdms

  EMG monitor write EMG signal acquisition at sEMG_1.tdms

  As has been pointed out by Dennis, you need timing information. A one-way ticket (since you don't save it not in the file), must have the user to enter the frequency of sampling on the analysis of VI.

  Ago probably more appropriate than graphics cards. Graphics work best when it acquires a point at a time, while the graphics are better for data blocks.

  Lynn

• Fill in the time field, based on the checkbox

  I am trying to find a script to do the following:

  If checkfield.rawValue = "1" (checked)

  timefield.rawValue = (current time)

  If checkfield.rawValue = "0" (unchecked)

  timefield.rawValue = 'null '.

  Any ideas or suggestions would be greatly appreciated.

  Thank you.

  Here's a modified version. Display BBS of the script added additional characters that mess. I moved the code to the change event of the box (I think it's nicer whne the user clicks to see the change rather than leave the checkbox). Validate the e Th message was because you had a pattern on the ground and time resulting does not match. I deleted the template as well as disable the validation script message.

  Paul

• Prevent users from cut and paste content in the form fields (form data)

  Hello

  I have a requirement where there are two fields: "Enter the email address" and "Re-enter E-mail address. The form should not allow the user to copy - paste the email address in the field enter again. It must be entered manually. Is it possible through javascript? Or by setting the properties of the form with LiveCycle Designer? I use the version of the Es4. I am aware that I can restirct user copy the content in the form. Solution for bonding of retrict will be highly appreciated.

  Thanks in advance,

  Radhika

  Hello

  You can check if the Ctrl key is pressed while the new value is entered in a field.

  If you can at least avoid pasing via Ctrl + V key combination.

  if (xfa.event.change.length > 1 || xfa.event.modifier === true ) {
      xfa.event.change = "";
  }
  

• HARD drive is full, but only be able to view the OS, applications and data. Need help to find out what else takes place.

  I am running a Compaq nx 7400 and Windows Vista Business edition. My HARD drive is 66.6 GB. PROG 7.63 files. Windows 9.61. 19.3 user data. 36.54 total.
  But my HARD disk is apparently full of 98.7 percent. Where the other GB 30.1? Recycle bin isempty and deleted temporary files.
  I want to upgrade to Win 7, but do not have the space.
  Can someone help me, please!

  Hello Falcodriver,

  Thanks for the return of the answer!  I have included a link below with a similar question.  It could be the system restore or backups that use the extra space.  I hope this link helps!

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/hard-drive-is-full-and-i-Don ' t-know-why/83b620da-c029-4a1b-81cd-0b166b008162

  Thank you

• Why not any video I watch just play all the time? they always stop and then start.

  When I watch they always stop, then start the video, and navigation appears on some things that I watch or and icon of this kind.  Why would he do that?  I didn't yet this thing 2 weeks yet.  What could I do for her already?

  Hello

  Try the following.

  First, download the Flash uninstall utility on the link below and save it to your desktop.

  Flash Player Uninstaller.

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the laptop.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download. 

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the ActiveX component.  Once completed, restart Internet Explorer.

  If you still get the problem of loading, run a check of the speed of your internet connection by using a site like the one on the link below, where it is causing the problem.

  http://Speedtest.NET/

  Kind regards

  DP - K

• JavaScript - fill out the text field with data entered

  Hello

  I am learning javascript and need help to put in place a script that will do the following:

  I have three text fields where users enter data. I would like to take this data and provide a summary in a 4th text field. If a field is null, it should be ignored.

  TextField1

  textfield2

  textfield3

  Summary data entered above must be posted in textfield4.

  Text1

  Text2

  Text3

  Your help would be much appreciated.

  Thank you!

  Varns

  Hello

  On the calculate event of the textfield4 put the following text (or something like that):

  var str1 = "";

  var str2 = "";

  var str3 = "";

  var str4 = "";

  If (TextField1.rawValue! = null)

  {

  str1 = TextField1.rawValue + "\u000a";

  }

  If (TextField2.rawValue! = null)

  {

  str2 = TextField2.rawValue + "\u000a";

  }

  If (TextField3.rawValue! = null)

  {

  str3 = TextField3.rawValue;

  }

  STR4 = str1, str2 + str3;

  If (str4 > "")
  {
  this.rawValue = str4;
  }
  on the other
  {
  this.rawValue = "";
  }

  You may need to adjust to your exact needs - good luck!

  Stephen

• How to change the time stamp of data hh:mm:ss:ms to hh?

  
  

  Replace your continuous sampling DAQ Assistant.  In this way, he'll enjoy permanently.  With the samples finished, it reads just when you tell him.

• I have problems with my printer, most of the time I get a message saying to start my spooler and when I try it says I have an error any help would be appreciated

  as said I have problems with the printer spooler with the fact that it's the second printer the same problem, it seems to be a Windows related problem

  Hello Martin,

  Try this fix it site: http://support.microsoft.com/mats/printing_problems/ .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup