View the Qosmio G35 - not coming not at startup

I recently tried to increase speed start by getting rid of things I don't think I needed running. Now when I start my Qosmio G35 I hit FN + F5 keys to see anything on the screen? And when I got home I couldn't extend my monitor screen, were all two virgins?

I finally booted in safe mode and was able to get my laptop screen works again, I still need to hit FN, F5 to start. What I screw up? and how do I get it back to where it was?

> and how do I get it back to where it was?
I think that the answer is simply to enable all things you have disabled before.

Tags: Toshiba

Similar Questions

  • Windows live mail has stopped working properly. Can view the Inbox but not send e-mail messages. Send a message: problem with page caused either to stop working.

    My windows live mail has stopped working correctly: I can view my Inbox but not send emails, because a box appears and indicates a problem with this caused page internet explore to stop working. This seems to be connected to the other problem I have with windows live messenger, who says his side by side configuration is incorrect.

    I uninstalled windows live essentials and reinstalled it but still the same result. Have also installed all updates via the windows installer.

    I am close to throw the computer because the problem seems irreparable: HELP!

    Hello

    The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

  • A few Questions on the Qosmio G35-AV650 series

    I have some questions that I would ask to my Qosmio G35-AV650.

    1: I've updated the BIOS to v1.4 (2005), to v3.3 (2007), to install Vista.
    Vista does not work so I removed it - I guess that I need to update the drivers again.
    In any case, I got my PC to normal - delete the partition allocated to Vista and reset the boot record.
    However, there was something that happened to my pc. The model has been replaced by "Laptop".

    My DVD DO NOT work for recovery. It says 'BAD COMPUTER'. IM wondering how it could have happened.
    If anyone could shed some light on what might have changed the name of the template, do so.
    The only thing I can think is the update of the BIOS. Any ideas?

    2: my HARD drive crashed at 1 point of time before. In order to
    avoid any loss of data, I have intertwined around hard drives and reinstalled XP on the secondary HARD drive.
    However, this is somewhat troblesome. First of all, the Qosmio player no longer, because it is
    the disk of HARD original 1. Secondly, if I did a reinstall on 1 HARD drive, it would remove the Qosmio Player?

    Third, if I put the hard drives back to the initial placement and boot from HDD 2, HDD 1 IS NOT recognized by the PC.

    It seems I have TO boot from HDD 1 for 2 HDD is picked up by windows.
    Is there a way to test PC to start from 1 HARD disk then boot from the disk HARD 2, eventually recognize two hard disks?
    Or is there a way to manually "load" both hard drives?

    3: what would you recommend to do if Windows won't recognize the Bluetooth device. I know that his work.
    I installed a Virtual Machine and installed the bluetooth in it. It is during the driver installation process
    that the installation crashes with devices NOT picked up by the operating system. Any ideas? I can't use the recovery DVD trying to install
    the original drivers [see #1].

    How can 4: if I'm using the standard Windows Xp CD, I load the Toshiba RAID drivers? The only thing I see
    includes a floppy drive, which does not have the kaptop.

    I know this is a long post :)
    Thank you for your responses and reaing.

    Man, these are some deep questions. Your laptop looks new, under warranty? If so, go back to Toshiba and make them understand the 'thing'. These things are problematic I know... it is a little hidden from any sale side isn't it.

    If you want to put in Vista, just follow all the instructions in the Forum of Francisco - you can tell that's the one with the most comments. If you follow the messages from scratch, you will be able to get your business laptop.

    Francisco is our leader of the sect. He's awesome. He saved us where Toshiba does not have. Welcome to the fraternity.

    Brother of Tay.

  • I can't go in the drop down menus to work, I roll over and click on, nothing happens. Clicking on some of the miniature pictures to change the magnified view, the captain does not change. So annoying! I can't use FF like that. I am newly updated, 10.0.1.

    This site (http://video.pbs.org/) drop downs 'Programs' and 'Subjects' do not work when you click on it.
    This page (http://www.modcloth.com/shop/dresses/ain-t-over-until-it-s-clover-dress) when you click on the thumbnails of the green dress, the larger picture view does NOT change.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • View the journal does not display not database tables

    Hello experts,

    It is perhaps a silly question to some people, but I have a weird situation: so, I ran my obi report online. the data appear to be not correct. So, I went to view journal catch of the statement and execute it in the comic book. However, when I click on view log, I see is the overall, I don't see the 'WITH SAWITHO' where I can copy the statement with alias tables and check the database.  I know well as shown log levels.  I reloaded the data, stored and forever.

    Anyone know what could be the reason why I do not see this statement?  Help, please

    OK, log level 5 is fine for SQL (the request is recorded from 2).

    Do you see the query if you check in nqquery.log?

    You say front cover, but what of the BI server cache? This isn't a front cover.

    Have you tried clicking on the Refresh button on the top menu right?

    At least you see the physical query for other reports?

    Your newspaper said anything else? (or it's just empty after the SQL logic?)

    Really read every single line to see what is happening, the journal is very talkative, he says everything in general.

  • How to install Windows Vista on the Qosmio G35-Av600 RAID driver?

    I have Windows Vista Home Preminm upgraded Pakage. When I start the installation process, the installation program ask Toshiba Raid Driver. So I click the button to load a driver and choose the folder where the driver is located, as mentioned on the guide, but said configuration there is no driver found for this player.

    What is the reason and what is the solution?

    Hello

    Have you chosen the right RAID driver?
    It seems that this laptop Qosmio was designed for the American market and therefore, you need to download the driver to the US page:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    It is specially designed RAID driver for Vista. At that time its version 1.10.0016 .
    Please note that you will need to extract this file prior to installing the RAID driver!

  • Qosmio G35: Cannot boot from the recovery disc

    I'm in trouble from the screen of my Qosmio G35 showing lines vertical, gel, then a loop on and outside.

    I used the Toshiba factory restore disc to reformat and the problem remains, I went further and chose the maquis of the HARD drive option. Bad choices made by this beginner, because now it does not recognize the drive at all, prompting me to "initialize".

    Lines remain, but it is not the material of the screen happens during some process that I follow, OK.

    A friend more computer over the phone prompted me to go into the BIOS, but we cannot access them. Research on the web, I tried the F12 suggested, but this does not work, just push me through in a screen offering 'Safe Mode' etc.

    Any help would be welcome. Thank you

    Hello

    Usually the vertical display lines looks like a hardware problem, in my view, it could be related to GPU failure.

    In any case, we should start first of all the problem of CD/DVD drive you must check if the disc is properly recognized in the BIOS.

    For this, it must Access the BIOS press the ESC (if Toshiba BIOS) or the key F2 (if Phoenix BIOS). Please check these two options because I m not 100% sure what the BIOS the Qosmio G35 uses.

    But like I said earlier the issue looks like a malfunction of the graphics card and you must contact the ASP in your country for assistance.

    Best regards & friend good luck

  • Qosmio G35 availability to the United Kingdom is?

    I saw the Qosmio G35 AV660 specification and which is built as a standard suits my purpose entirely.
    After checking all dealers and distributors in the United Kingdom, nobody seems to be aware of the existence of this version and therefore cannot give me a purchase price.

    This version of the Qosmio is available from distributors in the States and the far East - can it be obtained here (UK) and at what price?

    If this is not the case - there there problems with the purchase of other countries?
    Thanks for any info you can pass!

    Hi Frank

    The Qosmio G35 AV660 was designed specially for the American market and to my knowledge, it is not available in Europe.

    I think that if you want to buy it you must contact a dealer of US laptop or an importer of mobile to the United Kingdom.
    Looking for a little bit to the internet...

  • Can Qosmio G35 - I update the BIOS to version 3.40?

    I've owned a G35-AV600.

    I download the file to update the BIOS ACPI of Flash by using the provided file 'qg35v34.exe '?

    I started to run the file, but I had a windows "enforcement" for several minutes with almost no disk activity. I assumed that the update of the BIOS is wrong and stopped manually (crazy, I know!).

    However, the laptop seems to continue working.

    Any suggestion? Should I run it again?

    I'm really confused. With other laptops and PC computers, the BIOS updates worked just fine and fast.

    Thank you very much.

    Hello!

    For the Qosmio G35 is already version 3.80.

    Download the latest version here and try again:
    http://www.CSD.Toshiba.com

    In the download of the package's documentation where you can find information how to upgrade the BIOS.

    Good bye

  • Qosmio G35-AV600 - drivers & tools in German language?

    +++ Happy new year to you all.

    I am interested to buy the Qosmio G35-AV600 to the United States. I would like to change the keyboard in a German. Where can I find all the drivers and utility software in German language or German Qosmio laptop is compartible for G35-AV600? This laptop will be a gift for my sister and she doesn't know how to speak English very well. I like to set up the mobile world in the German language included in Windows XP.
    Who will be able to help me?

    Thanks & best regards,
    Marc

    Hello

    Everything you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com > support & downloads > Support home page.

    Only problem I can see there is TV tuner because it is a country and I am afraid it is not possible to use it in Europe (another standard TV). I'm also not sure how the WLAN card works because a user has reported that it has problems to the United Kingdom with American machine.

    I know that the units are less expensive in the United States but as Qosmio unit should be used with all the material and all the options. The Qosmio G30 series is great but it will be perhaps better to buy F30 in Germany and your sister will have no problems.

    Please do not include it as something negative, but that's just my opinion.

    Happy new year!!!

  • How to create recovery CDs Qosmioplayer on Qosmio G35

    I just bought a G35 "re-certified factory". I know that it is an American model, but American support site doesn't have a forum this good.
    Apparently, the Qosmio G35-AV600 model, it is not possible to create a recovery Qosmio player once CD DVD recovery Qosmio has been used to restore the software 'image' on the computer's hard disk drive. If I try to create a the Qosmio player recovery CD, the computer ejects the blank CD, and the following error message will appear:

    «File has been deleted or co...» "

    This is because the utility program that creates the Qosmio player recovery CD is not reinstalled by the Qosmio Recovery DVD, even if all other software is reinstalled successfully.
    The laptop came with a recovery qosmioplayer CD. I downloaded the "Qosmio Player Utility for Windows XP" on the following Web site:

    http://askiris.Toshiba.com/

    All he seemed to do was run installshield (XP) and unzip some files on the 'c' drive, but who has still no effect. Apart from asking Toshiba to send me the recovery disc, is there something I can do?

    Hello Slim

    Toshiba laptops we are not known to me and I put also t know how they are delivered, but I can give you some info on European Qosmio models.

    Each laptop Qosmio (G30 as well) comes with recovery media (recovery media Qosmioplayer and Recovery DVD for the installation of the OS). Because of this, it is not possible to create any recovery media. Qosmioplayer is not part of the operating system and not installed on the Windows partition.

    Qosmioplayer is Linux based on reader and pre-installed on some unpartitioned HARD disk. AFAIK utility Qosmioplayer is created to import films registered in the Windows operating system to allow watching, editing and also save them on CD or DVD.

    The fact is that you cannot create Qosmioplayer recovery on your own media. I'm sure that the American units are designed and pre-installed on a same or similar principle.

    Good bye

  • The Qosmio X 300 - 13W will be overheated?

    I think to buy the * X 300 - 13w * but a guy told me do not buy because of overheating problems.

    I know a CPU quad core and bi - GPU product temperatures, but I don't know if that damage the machine. I'll import, I have the only one year warranty: (.) (i) I live in a country with temperatures of 35 + C in summer. (i)
    {color: #ff0000} _do you owners of the X 300 (especially of the X 300 - 13w) face overheating problems? _ {color}?  :| What do you offer me?

    Thanks in advance!

    Hello!

    I think that it s no problem and the Qosmio will not get overheating problems.

    I looked in the manual and there is information that you can use Notepad in the above 35 ° C operating status.
    Alternatively, you can download the manual here:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online user manual for Toshiba.

    A quad core and bi - GPU processor produces a temperature high who of right, but the Qosmio X 300 has a really nice cooling.

    So much fun with this laptop really good.

    Good bye

  • View the service tasks

    View the function does not appear under the window when I select the stain of the tasks.What should I do?  I use LR 5.7.

    Use the "T" key to toggle the toolbar.

  • Qosmio G35-600 - controls volume control

    Hello

    I have a Qosmio G35-600. I could be wrong, but I'm sure that my volume control provides advanced controls and I had access to the entry monitor, which is now gray. I reinstalled my SigmaTel Audio Driver (qg600audiox.exe), but who return advanced controls or to provide access to the input screen. The volume control is Microsoft volume control version 5.1 (Build 2600.xpsp_sp3_odr.101209 - 1647: Service Pack 3).

    Any ideas?

    Thanks in advance

    Hi watson123,

    What input screen you mean exactly?

    On the right side of the Qosmio G35, you have the volume control wheel to adjust the volume. Using this wheel, you can increase or decrease the volume of the internal speakers or headphones but it doesn t offer more options. It s just to adjust the volume.

    The sound card is in the Device Manager correctly and you have any yellow exclamation points or unknown devices?

  • Qosmio G35 display shuts off and won't turn back on

    After sitting for some time an hour or more generally the screen shuts off and no button can't seem to get the monitor to turn back.

    The Qosmio G35 still works and every once in a while, the screen turns on, but I don't know why.

    Have you tried to update the display driver and BIOS?

    I read about a similar question in this forum and especially a BIOS update and update the graphics driver helps solve this problem.

    Good luck

Maybe you are looking for