ViewObject row is always zero

Similar Questions

• Watch faces for smartwatch 3 of sony displays always zero steps after update 1.4

  Hello

  After the android wear 1.4 update, dials for smartwatch 3 Sony show always zero steps. If I switch to a Google made watch, only that the face will show the number of steps. I tried to do a factory reset on my SW3, but it does not help.

  Someone else you have this problem?

  I installed google made on my phone and after that the steps are shown on the dials of sony. Before bringing android 1.4 that I should not have google made installed on my phone.

• OAF: row.length always returns 1

  Hello world
  
  
  EmployeeVOImpl vo1 = getEmployeeRowVO1 ();
  Line [] row = vo1.getAllRowsInRange ();
  for (int i = 0; i < row.length; i ++) {}
  EmployeeRowVOImpl row2i = row2 (EmployeeVORowImpl);
  .
  .
  .
  
  }
  The problem is row.length always returns 1 if the loop runs only once.
  If I put vo1.getRowCount () instead of row.length, the loop is one iteration for the second time but in error to EmployeeRowVOImpl row2i = (EmployeeVORowImpl) [i] row2; (oracle.apps.fnd.framework.OAException: java.lang.ArrayIndexOutOfBoundsException: 1).
  System.out.println ("Row count:" + vo1.getRowCount ()); Returns 450
  VO has 450 records.
  What can be wrong here?
  Any suggestions would be really grateful...
  
  Thank you.

  Hello

  You can try the code below

  OAViewObject vo = (OAViewObject)getEmployeeRowVO1();
  EmployeeRowVORowImpl row = null;
  
          int fetchedRowCount = vo.getFetchedRowCount();
  
          RowSetIterator yourIter = vo.createRowSetIterator("yourIter");
          if (fetchedRowCount > 0) {
              yourIter.setRangeStart(0);
              yourIter.setRangeSize(fetchedRowCount);
              for (int i = 0; i < fetchedRowCount; i++) {
  
                  row = (EmployeeRowVORowImpl)yourIter.getRowAtRangeIndex(i);
            }
       }
       yourIter.closeRowSetIterator();
  

  Thank you
  JIT

  Published by: appsjit on Sep 10, 2012 15:10

• ViewObject get attribute always returns null

  Hi guys,.

  I need your help, I'm going crazy.

  I'm just trying to browse a ViewObject as I did a thousand times but despite getEstimatedRowCount return 1 and the Row inside the SENTENCE object is not null, getattribute always returns null, does not care if I call getAttribute (String) or getAttribut (int)

  This is the last code I tested:

  AppMod = (PeopleFinderAppModuleImpl) this.getApplicationModule () PeopleFinderAppModuleImpl;

  PfUserGetInfoImpl pf_Info = (PfUserGetInfoImpl) appMod.getPfUserGetInfo1 ();

  pf_Info.setp_userid (UserID);

  pf_Info.executeQuery ();

  System.out.println ("# view getEstimatedRowCount:" + pf_Info.getEstimatedRowCount ());

  PfUserGetInfoRowImpl r = null;

  RowSetIterator rsIterator = pf_Info.createRowSetIterator (null);

  While (rsIterator.hasNext ()) {}

  r = (PfUserGetInfoRowImpl) rsIterator.next ();

  System.out.println ("# AttributeCount:" + r.getAttributeCount ());

  String [] uploading = r.getAttributeNames ();

  for (int i = 0; i < attrs.length; i ++) {}

  System.out.println (I + "" + uploading [i] + "=" + r.getAttributeValues () [i]);

  }

  }

  rsIterator.closeRowSetIterator ();

  The output is:

  # userid: EPETRANG

  # Discovers getEstimatedRowCount: 1

  # AttributeCount: 13

  0 Userid = null

  1 name = null

  2 Givenname = null

  3 family name = null

  4 title = null

  5 Dn = null

  6 mail = null

  7 company = null

  8 Department = null

  9 Telephonenumber = null

  Mobile 10 = null

  11 Ipphone = null

  Manager of 12 = null

  My Env record:

  Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493

  1.6.0_45 64-bit JVM

  Of course, the query returns 1 row SQLDeveloper and ApplicationModule compressiometre is as well.

  You see something wrong in the code? I tried to delete and re-create the ViewObject without a bit of luck.

  Hi guys,.

  Thanks to you all.

  This morning I just tried to delete and recreate the Weblogic JDev field and now everything works fine. Looks like that integrated weblogic has been screwed

  Thanks again.

• Account not always zero?

  Hello

  Report generation sequence file, as reportgen_txt.seq comes with TestStand, a step called "add an account no. In my understanding, this is the model, as sequential model.seq, but I always saw him again.

  I was interpreting this parameter in the report would say a test had altogether, how many steps because my tests may take a different number of steps. Is my assumption correct that this setting would say total number of steps performed, including all the step is executed for example in a while loop?

  BR

  Petri

  Hi Petri,

  Your understanding is good. ' Add an account of not ' AddReportHeader sequence step adds the total number of steps performed in test runs.

  This parameter in the report will be 0 if you have disabled 'Understand the results of Step' in the dialog box for the corresponding report plugin Report Options.

  I hope this helps.

  Kind regards

  Sahana

• My monthly allowance of photos has not updated, always zero.

  Hello people.

  
  I bought a picture of 10 per month plan.  Just before the end of June, I had a bunch of pictures and got my June zero balance.

  When it came on July 1, my allowance of photo was still 0.  A week later, I'm still at zero.

  I have to do something to get my photos of July?

  -A

  It is not by calendar month. He's going by billing period. So if you subscribed on June 26, for example, credits will reload on July 26.

• BUG: VlanID always zero for vSwitch exchanges

  After the upgrade of vCO 5.5 to 5.5.1 I discovered to my dismay that it is now impossible to recover the ID vlan for a traditional portgroup; now, the reported vlanId is always '0' (not null or undefined).

  This is clearly a bug, and in my case, it breaks all sorts of things.

  I use the following code, which worked in 5.5:

  var host = Server.findAllForType ("VC:HostSystem");

  host = host [0] var;

  allpg = Host.config.Network.PortGroup

  for (var n = 0; n < allpg.length; n ++) {}

  Spec = .spec allpg [n];

  var pgvlan = spec.vlanId

  pgname = spec. Name

  System.log ("Portgroup" + pgname + "a vlan" + pgvlan)

  }

  
  

  Since version 5.5.1 the vlan ID returned is always 0.

  It is a problem with the service of the inventory. You can tell vCO to NOT use the service of inventory by adding the following line to vmo.properties, then by restarting your vco-Server service:

  com.vmware.o11n.vim.useInventoryService=false
  

  VMware is aware of the issue and will fix it in a future release. In the meantime, you can use the parameter vmo.properties as a work-around

• Casting of string as int makes it always zero?

  Hello

  I had to do

  _myID = event.selectedRow.getData ("my_id");

  in

  _myID = event.selectedRow.getData("my_id") as int;

  so that it stops, causing a warning when my boyfriend it loads in FlashDevelop (I work in Pro)

  Since then, each myID became 0. for example if event.selectedRow.getData ("request_id") contains "29" becomes 29 at zero.

  What should I do for that "29" becomes 29?

  Thanks for taking a peek.

  var s:String = '29 ';

  int (s) will work and number (s) will strive to convert '29' 29.

• OPENING CC, I CAN SEE 'INSTALLATION UPGRADE' BUT THE TIMER STAY ALWAYS ZERO AND NOT GO FORWARD

  FROM MANY HOURS, TRYNG TO OPEN CC, I MET A WINDOWS 'UPGRADE INSTALL' BUT RELATED TIMER WAS RESET AND CHANGE

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

• Limits of a part of the text

  I'm trying to get the limits of a portion of a textFlow. I tried to extract the part via:

  var tf:TextFlow = _textFlow.deepCopy (start, end) as TextFlow;
  trace (TF.flowComposer.numLines);

  I wanted to use the TextLine.getBounds () method to get the bounding box of the text. The number of rows is always zero, so I can't extract the line via

  _textFlow.flowComposer.findLineAtPosition (0).

  I tried to work with compose() and so on, but the number of rows is zero.

  Is there another possibility to get the limits?

  Thanks in advance.

  The number of rows is zero until the text was composed. He must have a controller before being committed.

  If the text is already composed as you like in the original TextFlow, you could get the lines intersecting the area that you care. You can do in the flowComposer handing. That gives the TextFlowLine and you can iterate towards the front on the last lines in the region you care. Here is an example of what this might look like:

  var lineIndex:int = textFlow.flowComposer.findLineIndexAtPosition (startPosition);

  var endLineIndex:int = textFlow.flowComposer.findLineIndexAtPosition (endPosition);

  While (lineIndex<=>

  {

  the var line: TextFlowLine = textFlow.flowComposer.getLineAt (lineIndex);

  ... do something with line...

  ++ lineIndex.

  }

  Hope this helps,

  -robin

• Brightrness R61 is zero on startup-why?

  When I turn on my R61, the screen is grey, and I have to use Fn > House to bring the brightness. When I turn off, brightness is set to 15, at the start, it is always zero. It happened for about 6 months - prior to this, the problem did not exist.

  Any thoughts?

  It is a power saving option. go to Lenovo power-> global settings manager and uncheck everything under "dynamic brightness control.

• Socket RAW InputStream.availalble () in stream wireless network always 0?

  For all BlackBerry networking expert out there.

  The explanation of the problem will be quite long, so I'll try to structure the message to facilitate navigation.

  Introduction

  Recently, we went from HttpConnection to raw sockets in our application.  It wasn't an easy decision (a lot of extra code had to be written and debugged) - it stemmed from the fact that on different devices HttpConnection behaves very differently and sometimes we would just hang out here for always trying to read something, although enough bytes was available in the buffers of the system (I have seen it with my own eyes; can develop if anyone is interested).  There are other reasons, but this has been the main.

  Previously working solution

  Once we went to the outlets and implemented our own HttpConnection (not me - someone to increase their knowledge in networks of BB did this), our problems have disappeared. In order to reduce the chance of getting stuck forever, we check InputStream.available () of the socket and, if there is always a thread. Sleep() 0, for some small interval (makes me cringe, but well, the user makes a call blocking!) then read just one byte (hoping that there might be something).  It worked for all trackball/touchcpad devices and all kinds of connections (SDM is a separate issue, but we managed)...

  New problem

  ... until we have tested the Storm (5.0 Storm1 and Storm2 - both 5.0 behaved similarly) with all, but connections WiFi disabled.  We have connected WiFi router to the company (I then repeated the test at home with my wireless router and got the same results).  BB browser worked fine.  However, our code began fails on our internal waiting time.  When I connected the phone to the debugger and set up breakpoints, I quickly discovered that InputStream.available () always zero returns! I'm not kidding!

  Our code was constantly diverted waiting, waiting, reading another byte, read a byte...  Even when I changed the way that we on the download time was exceptionally slow (as in "unbearable").

  Worse still - when I tried to wait before making the first longer interval (100ms) read, followed by reading the characters one by one without waiting, the phone started rebooting randomly!

  Request

  Someone has seen something similar?  If so, what was your approach?  I won't sit idly while waiting the answers here - I have a few ideas to try-, but if anyone has been there, it would be nice if you can just push me in the right direction.

  Thanks in advance,

  Arkady.

  Other people have had problems with available().  I'm surprised that you managed to get that you have to be honest, I thought he always returned 0.

  We make socket connections, and always the transmission with a header field that contains prefix length.  So read on the Blackberry is basically

  (a) header to read

  (b) reading of data

  (c) to process the data

  (d) proceed to (a).

  Another user and I had problems recently with http and OS 5.0 using WiFi connections - circuit up to and/or time out when reading the response.  This is the thread

  http://supportforums.BlackBerry.com/T5/Java-development/network-IO-hang-on-OS5/m-p/541487

  I would recommend you change your implementation of socket and detection of data along these kinds of lines, in other words, how data should be read and set up some kind of detection/stall.

  Does make sense?

• Search for ATG back zero refinements

  Hello

  I implement a search facets in an environment multisite with 3 sites. When I do a search, the number of refinements that are returned by the search in the current site is always zero.

  I tried test search via the search menu Merchandising in BCC, and the same thing happens. The other two sites, refinements are returned correctly, but in the current site, no facets are never returned.

  All facets are Global, so they appear on refinements for each site.

  Any ideas of what could happen? Maybe a setting I'm missing?

  Thank you

  Lucas

  Hello

  Do you have configured/atg/commerce/search/refinement/CatalogRefineConfigAdapter in your research at the CCI environment?

  You must add this component when configuring Pos-Index, in the tab content to your research project.

  Try to check this. If it is not correctly configured, the refinements will not work.

  And you are right when you say that, if the faces are GLOBAL, they should appear for each site.

  It will be useful.

• GetStat-entity (Cluster) - CPU in real-time - values to zero of the recent time intervals

  Hello world:

  I have a strange behavior when querying via PowerCLI CPU statistics.  We have a handful of clusters in a data center, some with HA + DRS and some DRS only.  PowerCLI seems to report different time intervals (5 min. 20 s vs) according to which cluster is queried and for the most recent 15 minutes of data queries is always zero, although sometimes it's only been 5 minutes which are zero.  This behavior is indicated for applications on clusters and resource pools.

  Is this known behaviour?  vSphere Client shows that the data is present when searching in graphics in real time, so it's confusing why smaller or no value is present at all from the CLI.  Ideally, I would like to know the average use of MHz and percentage for all groups to 20 s averaged granularity on the last 2 minutes, but no amount of massage does seem to happen.

  example query:

  Get-Stat - Realtime-Stat "cpu.usagemhz.average" - entity (Get-ResourcePool-name 'Low') - departure (Get-Date). AddMinutes(-20)-Instance "

  As I understand it, the measures for groups and entities related to the cluster as resourcepools, are aggregated values of definition.

  Which means that the vCenter must calculate these metrics of the values collected by the ESXi hosts.

  In other words there is no interval in real time for the metric for clusters, only of the historical intervals.

• Difficulty getting on component width dynamic (width is always 0)

  Hello

  I'm a newbie to flex and I was struggling with getting a width on components that I create in AS3 blocks. I have a TileList with a custom ItemRenderer component called ImageRenderer. When a user clicks on one of my articles, I would like to appear on the screen as well as a few other components. I have this work:

  public void onClick(e:ListEvent):void {}

  var i: Image = new Image();

  i.source =. img.source (e.itemRenderer as ImageRenderer);

  var h:VBox = new VBox();

  var t:TextArea = new TextArea();

  h.addChild (t);

  h.addChild (i);

  t.text = "Sample Text";

  h.x = 100;

  h.y. = 100;

  addChild (h);

  trace (h.width, h.height, root.width, root.height);

  }

  I get the Hbox to appear on the screen and displays the image, but the width and height that I get for the Hbox is always zero. Can someone tell me why this happens and how to fix it? I had another similar problem do anything else I ever solved, so perhaps my understanding of how flex calculates the width won't.

  Thank you

  I wonder if your trace is before printing the HBox has time to update its size - because of the asynchronous nature of Flex.  To find out, I put your trace() in a separate method and call this new onClick method using setTimeout(newMethod,500). Will give him half a second set to date. If it's always 0 try changing from 500 to 2000 (2 seconds). If it is still zero after that, then I'm wrong.