views get invalid when the procedure is changed

Similar Questions

• I have a slide show full frame, which works great, but is there a way to keep "next" arrows "prev" aligned vertically when the browser size changes? Also is there is way to add a border to a slide show full frame as well?

  I have a slide show full frame, which works great, but is there a way to keep "next" arrows "prev" aligned vertically when the browser size changes?

  Or a way to pin things generally vertically centered?

  Also is there is way to add a border to a slide show full frame as well?

  Thank you

  Hello.  For the problem of alignment, of the research this window https://helpx.adobe.com/muse/using/objects.html#Pinning%20objects%20to%20the%20browser%20w

  For once, click once on the slide show, and then click New. In this way you access the first image. Determine the race it and view it in the browser. It should work.

• In ADF when the list has changed

  Need help please...

  In ADF when the list has changed I want choose value in the attribute according to changes in the list.

  I would write a ValueChangeListener for the SelectOneChoice. There you can get the selected value and the appropriate value to the 'value' attribute

  It might look like this:

  {} public void valueChangeListener (ValueChangeEvent vcEvent)

  Get the selected value of SelectOneChoice

  String newValue = (String) vcEvent.getNewValue ();

  get the value of the attribute "value" depending on the value selected in SelectOneChoice and set

  ...

  }

• imitate the situation when the procedure call fails

  Hi all
  
  My need is to emulate the situation when the procedure call fails and I have an exception.
  How can I make it?

  You can use, RAISE_APPLICATION_ERROR to raise a custom exception, or you can create a situation where an exception will be raised-for example inserting duplicate data in a table with a uniqueness constraint, inserting data with an invalid foreign key, taking a tablespace offline, using too many characters in a string assignment... the list is long.

  Published by: Bravid on August 12, 2011 08:37
  typo

• What is the procedure to change the location of the public folder in Windows 7? __

  The location under different Public folder properties tab States "You can change where the files are stored in this folder somewhere else on this drive hard, etc.."  However, there is no button 'Move', as on the location of My Documents folders tab, music, photos and videos.  What is the procedure to change the location of the public folder - Documents, music, photos and videos?

  I answered this question already. You can see here. samc1

• FRX Drilldown Viewer Error Message When you try to change the destination printer

  Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output

  in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().

  I hope that some useful information about the system:

  They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).

  The OS is a 64-bit version with 8 GB of RAM installed.

  Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe

  could someone point me in the right direction, it?

  Thank you very much!
  Anthony

  Hello
   
  Thanks for posting the question.
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

   

  I hope this helps.

• Context of the sequence becomes invalid when the runtime is longer

  I have a sequence that loop for about 70 k iterations (which is pretty huge). The sequence called a subsequence where the inhabitants of the sequence called are modified. Question is, around 65 th iteration k, I get an error message indicating that the reference of the local past is invalid. The number of iterations when the error occurs varies from one computer to another, but always in the 65 k range. When I try to run another sequence (a single) consecutively, I get an "out of memory" error I guess the reason why the local reference is not valid because TS execution stops when the memory TS gets the complete decision-making context of sequence and therefore the reference local section not valid.

  I would like to know how to reduce the consumption of memory of TS because I disabled the result of record for all the result of sequences (Configure-> Options of Station-> run), disabled registration for each iteration of the loop, optimize no reentrant calls thi sequence is also enabled. I even tested with just this sequence of sequence and I wonder if there is a maximum number of threads of execution when a loop.

  PC configuration

  RAM-12 GB

  LabVIEW and Teststand 2010 SP1

  I will not be able to view the code, but the closure is a custom step which has sequence call as its adapter.

  Hello

  I tried this:

  Main sequence called a sub sequence, which includes 3 stages of instruction.

  I have a loop sequence sup to 75 k with result logging enabled.

  TS runs successfully - no problems.

  Try to jump steps (one at a time) in the sequence of sub to know at what stage leads to this question.

  Also try to reproduce using a simple sequence (that you can post online).

  Ravi

• How to get data in the procedure after CREATE TABLE table1 AS SELECT * from table2

  Hello

  can any body tell me how to get the data in the new table created in the procedure. because it gives following error.

  • Error (47,21): PL/SQL: ORA-00942: table or view does not exist

  tableName: = "BCKUP_" | TO_CHAR (sysdate, 'ddmmrrrr');

  tableDDL: = 'CREATE TABLE' | tableName. "AS SELECT * FROM Table1 where to_char(MSG_IN_TIME,''dd-mon-rrrr'') < sysdate - ' | daysNumber;

  EXECUTE IMMEDIATE backUpDDL;

  COMMIT;

  DELETE FROM Table1;

  How to select the data in the newly created table. as...

  Select * from ". tableName;

  Do not choose anything to get the number...

  Just after backupDDL EXECUTE IMMEDIATE, simply refers to SQL % ROWCOUNT - who will be the number of lines.

  Oh and DDL engages automatically, your commitment is redundant.

• Prevents a form of work when the design is changed

  I worked on a form sent to me by a designer, and being new to this particular aspect, it is taken a lot of time. The form was changed just a little bit and I was sent the version updated by the designer. As only a few things changed to 95% of the items I placed on the page could be reused - but when I tried to paste the sections and boxes in the new PDF, they were not in the right position, unlike if this had been done with a 'paste in Place' in something like InDesign.

  What is the best procedure to achieve this? Surely I don't have to start from scratch?

  Open the file with the fields and other things you have added then go to Tools - Pages - replace and select the new file.

  The new pages will be inserted instead of "old", but "everything" will remain in place.

  Edit: mistake fixed text

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike

• Bluetooth decreases when the network signal changes

  Hello guys,.

  Since the last update (23.5.A.1.291) my bluetooth devices (headphones, speakers, etc. I've tried several) are not functioning normally. Bluetooth keeps disconnecting and then reconnect. I thought it was random at first, then I thought it was when my network signal was change, for example when it goes from 4G to 3G, it disconnects (even when the network signal is also 2 bars 3).

  You have a solution, this is done on my nerves...

  Thank you

  Concerning

  I made this https://www.reddit.com/r/SonyXperia/comments/2mdmuk/getting_throw_function_to_workalternative/ and it worked.

• CS6 AIR flash device emulator throws off events when the sensors are changing

  I'm developing an application in Flash CS6 targeting AIR 21.0.0.176 for Android.  I've implemented the NativeApplication.nativeApplication Event.ACTIVATE Event.DEACTIVATE listeners.  These work as expected when the Android device is running standalone or if I am debugging via the interface to CS6 USB. However if I have a deployment on the simulator of premises, whenever I use the Simulator interface to generate a change in the accelerometer or location, the application then receives a DEACTIVATE event.

  It's difficult troubleshooting because on my manager to DEACTIVATE event by stop all the interactive features in the application.

  Any ideas please?

  I guess only the two ways to work with the configuration of the listener. It is not a bug, however, the window of the Simulator is a different application, when you select you have disabled your app, it did the right thing. But in this case, you don't want him to do the right thing, then use the work around.

• How to trigger a refresh of a drop-down list when the selection is changed

  Hello

  This is a general question of ExtendScript, but since I work with FM, I'll ask here first. I have a bit of a paradox here and I'm not sure of the best way to manage it.

  I have a dialog box with a drop-down list, where I want to refresh some controls when the user changes the selection in the list (dropdownList.onChange). This includes them refresh the content of the list itself. However, the problem is, whenever I try to update the content of the list, onChange triggers again. So, if I put the call to update box in the onChange handler, it will result an infinite loop, because my upgrade function fires onChange when it refreshes the list.

  Does anyone know a better methodology, where I can safely triggers a refresh of a drop-down list in the list's onChange event handler? I really wish that onChange was reserved for an action of the user only, or at least there is a property for this purpose.

  Russ

  Hi Fabio,.

  You can't "Refresh" a menu drop-down.

  But you can rebuild.

  You must do it "manually".

  As I do:

  1. I have a picture I want to show in the dropdownlist control.

  2. I have delete all children: myList.removeAll ();

  3 I have rebuild the list via mylist.add ("item", "myArray [index] in a for - loop.

  But if you know the exact position of the elements to remove or add, you can do so via splice()

• The default value for the elements of the page get ready when the session is disabled

  Hello
  
  I am facing this problem, do not know how to solve this problem. Basically, the default value 'elements' on the page don't prepare you when the session is disabled and I visit the page for the first time. So when I check the session for the first time, all page elements are null. But when I revisit the page, page elements sometimes gets.
  
  Don't know what I'm missing here... Someone has encountered this problem before?
  
  Thanks in advance! Kindly let me know if you need more clarification.

  Is there a way that the page element can be defined at the time the page is loaded for the first time?

  Yes. Create a "Page Rendering" PL/SQL process. That it is very early in the page rendering (i.e. "on charge ‑‑ after Header"). Set the value of the element of page here:

  BEGIN
    :P10_MY_ITEM := 15;
  END;
  

• Get error in the procedure of Jython

  Hi all
  
  I m writing this code in the procedure of ODI with technology like Jython target and ignore the errors checked.
  
  filesrc = open (was: \MyFile.txt ',' r')
  First = filesrc. ReadLine()
  lines = 0
  all first:
  lines += 1
  First = filesrc. ReadLine()
  def intWithCommas (x):
  If not in kind (x) [type (0), type(0L)]:
  raise TypeError ("parameter must be an integer.")
  If x 0 are:
  return '-' + intWithCommas (x)
  result = "
  While x > = 1000:
  x, r = divmod (x 1000)
  result = ', % 03d %s' % (r, result)
  return '%d %s' % (x, result)
  S1 = Str (intWithCommas (Lines))
  S2 = "\n\n and the first line of the file is - > > \n\n"
  filesrc. Seek (0)
  S3 = STR (filesrc. ReadLine())
  final = s1 + s2 + s3
  raise "\n\n are the number of lines in the file - > > ', final"
  
  but this error:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  (no object code) on line 0
  SyntaxError: ('invalid syntax', ('< string >", 5, 1, ' lines += 1'))
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:322)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:237)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:794)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:619)
  
  Please help me with this...

  Hello

  You are able to run this code directly from Jython?

  What you can do is to copy this code into a text file and name it say sample_jython.py.

  Now, open a command prompt and navigate to the \oracledi\bin

  Issue the following command

  Jython \sample_jython.py

  Thank you
  Fati