Vintage Laserjet 6 p/MP very slow-Postscript

Similar Questions

• LaserJet Pro M201dw: Laserjet Pro M201dw - print very slow or not at all

  Hello - I bought a M201dw Pro Laserjet is approximately 3 months.  I just change the original cartridge as an idea of how much/little it has been used. It has worked well for 3 months but started printing very slowly, or not at all with in the last few days.  It is not a network printer, it is directly connected to my PC.

  Thanks for any help,

  Jim

  Hello

  Try going into the service of the printer menu and changing the USB high speed to full

  The printer will restart and will have the best speed for the connection

  So, make sure the USB under 6 ft s and s a direct connection print and PC (without REPEATER MULTIPORT USB or something similar)

• LaserJet Pro 400 M401dw: LaserJet Pro 400 M401dw very slow after upgrade to Windows 10

  Updated from Windows 8.1 for Windows 10.

  MT LaserJet is printint to about 10% of the speed that it used.

  I've updated the firmware; did not help

  Hello, have you tried reinstalling the printer with windows 10 driver? Or change the PCL 6, PCL 5 driver? I could try it first and see if that changes anything.

  I hope this helps...

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.

• My macbook air 13 "(2015) is very slow, even after a clean install"

  Hello

  I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.

  Etrecheck give ' "Performance: poor"»

  Is there a hardware problem? or what to do?

  Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-05 10:18:11

  Download EtreCheck from https://etrecheck.com

  Duration 17:11

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  too slow

  Hardware Information: ⓘ

  MacBook Air (13 inch, early 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir7, 2

  1 1.6 GHz Intel Core i5 CPU: 2 strands

  8 GB RAM not extensible

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 40

  Video information: ⓘ

  Intel HD 6000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 6 tasks Apple

  tasks of Apple 166 [loading]

  [running] Apple 58 jobs

  [killed] 9 tasks of Apple

  9 killed process lack of RAM

  Launch system demons: ⓘ

  [no charge] 47 Apple jobs

  [loading] 158 jobs Apple

  [running] Apple 77 jobs

  [killed] 8 tasks of Apple

  8 killed process lack of RAM

  Launch demons: ⓘ

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2016-10-04)

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)

  Items in user login: ⓘ

  iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  uTorrent program (/ Applications/uTorrent.app)

  CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-09-03)

  QuickTime Plugin: 7.7.3 (2016-07-09)

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  14% WindowServer

  4% kernel_task

  0% SystemUIServer

  0% cloudpaird

  Top of page process of memory: ⓘ

  670 MB kernel_task

  Mdworker (11) 188 MB

  Com.apple.CommerceKit.TransactionService (2) 41 MB

  Finder 41 MB

  Mds_stores 33 MB

  Virtual memory information: ⓘ

  5.02 GB of free RAM

  2.98 used GB RAM (1.82 GB being cached)

  40 MB used Swap

  Diagnostic information: ⓘ

  5 October 2016, 09:38:39 test - passed

  Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?

• very slow Powerbook fine, iMacs

  My family uses 2 iMacs (1 2013, 1 earlier) and an Apple Powerbook at home. 2 iMac is incredibly slow, but the speed of the Powerbook is fine. IMacs both have a lot of unused storage and memory and I completely restored two iMacs and deleted unnecessary files, but they are very slow. I have everything back up on Dropbox and wonder now if the slowness is something to do with the combination of the signal at high speed and by using several connections of Dropbox in the House.  We have a Virgin Media Hub Super 2ac with advertised broadband router of up to 150 Mbps. I made a speed control using www.speedtest.com and the download speed is 105.81 Mbps and download speed is 9.70 Mbps. Any ideas anyone?

  You can view a report of etrecheck for later analysis

  www.etrecheck.com

  but I would like to disable and remove dropbox to test the system and if they improve the problem there.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• Very slow ARD mouse movements

  When checking my jobs local (same LAN) in ARD in macOS Sierra the mouse movement is very slow, are not smooth at all and the STI jumping cursor.

  This was never the case with ARD in the previous versions of OS X as El Capitan. I use the exact same settings and configuration. Control ARD clients so got very boring now under Sierra.

  Any ideas or others facing the same behavior?

  Thanks for your comments.

  I'm really the only one having trouble with the mouse under ARD here?

  I have a LAN local 1GbE very significant without bottleneck and change the color in ARD in black and white Mode has no influence at all for the risk mouse movement.

• MacBook Pro mid-2012 very slow

  Hello

  My MacBook Pro is very slow (it has gotten worse recently). Applications to take ages to load, Firefox is hogging resources and very slow, get the focus of the mouse has a huge lag and I was spinning.

  Currently I have 4 GB of RAM and is considering the upgrade to 16 GB. You run an EtreCheck report (below). Is there anything else I need to do? Why he began to be so slow after years of reasonable speed? Is there something I can adjust in Firefox?

  Opening documents and get stuff done becomes frustrating!

  Thank you for your support.

  EtreCheck version: 3.0.4 (308)

  Report generated 2016-09-21 12:50:28

  Download https://etrecheck.com EtreCheck

  Duration 09:05

  Performance: average

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: The computer is too slow

  Description:

  Computer is slow, Internet is slow, the development of the mouse in any program is slow, a lot of spinning.

  Hardware information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 378

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  System software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - time since started: about 7 days

  Disk information: ⓘ

  Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 498,88 (Go 298,35 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 499.25 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 149 tasks Apple

  [operation] 66 tasks Apple

  [killed] 16 tasks Apple

  16 killed processes lack of RAM

  Demons of launch system: ⓘ

  [loaded] 45 tasks Apple

  [loading] 143 tasks Apple

  [operation] 86 tasks Apple

  [killed] 16 tasks Apple

  16 killed processes lack of RAM

  Launch officers: ⓘ

  [performance]    HWPortCfg.plist (2015-09-04) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a 23d420d.plist (2016-07-11) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  com.oracle.java.Java - Updater.plist [no charge] [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-07-18) [Support]

  [loading] ouc.plist (2015-09-04) [Support]

  Launch of the demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [operation] com.backblaze.bzserv.plist (2016-07-11) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2012-04-02) [Support]

  com.oracle.java.Helper - Tool.plist [no charge] [Support]

  [loading] com.oracle.java.JavaUpdateHelper.plist (2014-06-09) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-07-18) [Support]

  Launch User Agents: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2013-01-06) [Support]

  [operation] com.backblaze.bzbmenu.plist (2016-09-14) [Support]

  Internet Plug-ins: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-09)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-09)

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-22) [Support]

  SharePointBrowserPlugin: 14.6.8 - SDK 10.6 (2016-09-14) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  3rd party preference panes: ⓘ

  Backblaze Backup (2016-07-11) [Support]

  Flash Player (2016-08-30) [Support]

  Trusteer Endpoint Protection (2016-07-18) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 200,52 GB

  Destinations:

  FREECOM HDD [Local]

  Total size: 249,72 GB

  Total number of backups: 36

  An older backup: 10 19, 2015, 23:58

  Last backup: 09 17, 2016, 22:59

  Backup disk size: too small

  Backup size GB 249,72 < (disc 200,52 GB X 3)

  Top of page process CPU: ⓘ

  29% firefox

  6% bzfilelist

  4% kernel_task

  3% coreaudiod

  3% WindowServer

  Top of the process of memory: ⓘ

  1.58 GB firefox

  652 MB kernel_task

  Mdworker (11) 123 MB

  Skype 82 MB

  QuickLookSatellite (3) 57 MB

  Information about virtual memory: ⓘ

  26 MB of free RAM

  3.97 GB used RAM (621 MB Cache)

  5.32 GB used Swap

  Due to the limitation of memory, memory virtual swap used 5.32 GB which is the main part of the slowness.

  It would be better to RAM as soon as possible.

• Computer is very slow with El Capitan

  After the recent upgrade to El captain, my Macbook pro (13-inch, mid 2012) became very slow.

  Starting, restarting, Safari, open programs... Wheel of Rainbow all the time.

  If someone could help, I would be very much appreciated!

  Thank you!

  My Etrecheck results:

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-20 19:59:32

  Download EtreCheck from https://etrecheck.com

  Time 04:09

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.9 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 667

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 749,30 (Go 140.30 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - Count: 17

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Application Support/PeerGuardian

  xxx.qnation.PeerGuardian [no charge] (1.1.13 - SDK 10.8 - 2015-10-28) [Support]

  / System/Library/Extensions

  com.Wacom.kext.wacomtablet [no charge] (6.3.8 Wacom tablet - 2 - SDK 10.9-2016-09-20) [Support]

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 168 jobs

  tasks of Apple 64 [performance]

  Launch system demons: ⓘ

  [no charge] 48 Apple jobs

  [loading] Apple 165 jobs

  [running] Apple 77 jobs

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-09-16) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2013-01-11) [Support]

  [cannot] com.extensis.FMCore.plist (2016-09-06) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-08-13) [Support]

  com.Wacom.wacomtablet.plist [running] (2014-03-31) [Support]

  Launch demons: ⓘ

  [loaded] com.adobe.SwitchBoard.plist (2016-09-16) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (08 / 08/2013) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-09-16) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2015-12-28) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-08-13) [Support]

  [loading] com.rogueamoeba.instanton - agent.plist (2014-03-25) [Support]

  [loading] xxx.qnation.PeerGuardian.locum.plist (2015-10-28) [Support]

  User launch officers: ⓘ

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-09-20)

  [loading] com.spotify.webhelper.plist (2015-06-08) [Support]

  Items in user login: ⓘ

  Application of hidden caffeine (/ Applications/Caffeine.app)

  Suitcase Fusion 6 hidden Application (/ Applications/Suitcase Fusion 6.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-28) [Support]

  Default browser: 601 - SDK 10.11 (2016-09-17)

  Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-06-07) [Support]

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2014-03-31) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-09-16) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  Silverlight: 5.1.20513.0 - SDK 10.6 (2016-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-17)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

  AdobePDFViewer: 10.1.1 (2016-09-16) [Support]

  JavaAppletPlugin: Java 8 updated 66 17 (2016-09-16) check the version of build

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Flip4Mac WMV (2013-03-29) [Support]

  Growl (2016-09-16) [Support]

  Java (2016-09-16) [Support]

  WacomTablet (2016-09-16) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  kernel_task 2%

  0% aslmanager

  0% fontd

  0% AddressBookSourceSync

  Top of page process of memory: ⓘ

  573 MB kernel_task

  Com.apple.WebKit.WebContent (9) 369 MB

  66 MB WindowServer

  Safari of 57 MB

  49MO softwareupdated

  Virtual memory information: ⓘ

  5.37 GB of free RAM

  used 2.63 GB RAM (2.02 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  Sep 20, 2016, 19:52:05 Self test - passed

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-183021_[redacted].crash 18:30:21

  / Applications/Suitcase Fusion 6.app/Contents/Resources/FMCore

  Sep 20, 2016, 06:24:44 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-09-20-182444_ [redacted]. Crash

  com.wacom.WacomTabletDriver - Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-181728_[redacted].crash 18:17:28

  First uninstall CleanMyMac3. It is not necessary and can ask questions.

• Mac Mini became very slow all of a sudden

  This morning, my Mac Mini became very, very slow. It's a 2009 with 4 GB of RAM and hdd 120Gb standard.

  I run with a keyboard and bluetooth mouse and due to its slowness, I wanted to run the hardware test to see what was wrong. (As is always the original HARD disk, I am wary of its remaining life expectancy). However, everything I try, I can't start anything on the mini as a normal reboot. If I have D, hold down option-D, hold SHIFT to safe mode, nothing seems to influence his start-up.

  Any thoughts? And also, suggestions of things to check?

  Run > Etrecheck.com and post back here with the results.

• My wifi/internet is very slow since the IPhone Update 9.3.4.

  I have an IPhone 6 and since the update (3 days ago) my wifi/Internet is very slow.

  Minutes of need for pages to load, and the App Store and the ITunes App not to load any. Photos and videos need a time very Long if they work at all.

  The wireless router is not the problem because my laptop works fine with it.

  Thank you for responding!

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

  Alternatively, you can try to reset the App Store first, since it won't load at all. Please follow these steps:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then restart the unit.

  Then sign into the iTunes Store and try to download again.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Since installing Windows 10, Thunderbird very slow load and run. Is there any solution for this? RESOLVED itself. cause: unknown

  It is not the only slow feature on this PC since installation W10. Internet Explorer is also very slow to load.

  Start * Windows * safe mode with active network
  -win10 http://windows.microsoft.com/en-us/windows-10/change-startup-settings-in-windows-10
  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

• Thunderbird 38.4.0 very slow to open or delete messages (about 5 seconds) CAUSE: Bitdefender AV

  Very slow to open or delete messages in Thunderbird. Compacting folders, emptied the files Junk and trash, no improvement. Just improved 38.4.0 (about 3 hours ago)

  If you have not changed anything except thunderbird update, then it is probably caused by antivirus software. See https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues and https://wiki.mozilla.org/Thunderbird: test: Memory_Usage_Problems

  Let us know what Dominique ind please