VIP in 11g RAC with CRS
Hi allMy system is a cluster at three knots 11.1.0.7 RAC with CRS (same version).
I have a question on the operation of VIP.
Notes:
eth0 - public interface
eth0: 1 - vip interface
eth1: private interface
If I come down with eth0 (ifconfig eth0 down), VIP is moved to the other of the two remain alive nodes on the network. Everything is OK at the moment and only resource of listener in CRS stack is offline, same INST, GSD and ONS are online and remains in the first node.
Can I ride with the public interface (ifconfig eth0 up). Now, everything remains in the same State... Change anything!
Issues related to the:
-Node1 VIP resources should come back to the first node?
-Listener resources should come back online?
I can manually start the listener resources or move vip for the Node1 no problem... but this must be done without manual Word, isn't it?
Thanks in advance.
user605547 wrote:
I know that this listener is depending on applications (vip)... so if VIP turns not upward, listener cannot start
All my question is on auto VIP travel after a power failure network, so I'll try to understad what is happening and what it should happens.Scenario 1:
Step 1:
=> Node1: ifconfig eth0 down so vip switches node2 and node1 listener also breaks down. Other resources from node1 remains online.Step 2:
Node1: ifconfig eth0 up-online nothing happens and everything in the same State. Node1 VIP is still running in node2Question: NODE1 VIP should move node 1 (from node2) automatic?
11 GR 1 material, NODE1 node01 not auto VIP, we always move manual.
It's actually the default behavior by default in 10.2.0.4 and 11.1.
Step 3:
Node1: srvctl start listener - n node1-l listener_node1-online vip node1 moved to node 1 and Monte listener_node1
not sure, maybe srvctl check everyone, and then move the VIP
Scenario 2:
Step 1:
=> Node1: ifconfig eth0 down so vip switches node2 and node1 listener also breaks down. Other resources from node1 remains online.Step 2:
Node1: ifconfig eth0 up-online nothing happens and everything in the same State. Node1 VIP is still running in node2Step 3:
NODE3: srvctl stop listener - n node3-l listener_node3 (by changing the State of a resource does not contact with node1) =>
-Online listener of grave node3 fails, node1_vip moved with the listener and node1 node2 in node1 MonteIs this normal? It seems that any operation in forces CRS to check the availability of NODE1_VIP and get in the original node? Expected behavior?
When we use srvctl, instance control is carried out, the check address public ip-> resolved and then move VIP
What is?
ORA_RACG_VIP_FAILBACK in the script racgwrap in the ORACLE_HOME
Tags: Database
Similar Questions
-
Deployment of Oracle 11g RAC Release 2 with IBM midsize V7000
At and deployment 11g rac with IBM midsize V7000 san with aix 6.1
Is this possible using Oracle CRS without going to the OS like GPFS clusterlbn76 wrote:
At and deployment 11g rac with IBM midsize V7000 san with aix 6.1
Is this possible using Oracle CRS without going to the OS like GPFS clusterOracle Grid these days use ASM starts for vote and register files storage. So no need for a cooked cluster file system that must be mounted by all nodes. No need either directly with a gross storage logical unit number.
ASM uses the LUN of the matrix of storage/SAN directly (as devices of rough blocks).
Generally however, there are several I/O paths to that LUN on the SAN - in which case there is more than 1 device level o/s for this LUN. Multipath driver s/w addresses this and creates a logical (and redundant) device that sits at the top of several devices of i/o path to the level of the o/s.
You configure ASM to use devices of paths multiples (as devices of rough blocks) - and applying exterrnal, normal or high redundancy necessary when creating starts on these logical multipath devices.
The grid s/w and RAC database instances can then use ASM starts as cluster storage.
This makes storage much easier layer management - and also provide a number of useful features too.
This is also the approach recommended by Oracle Corp. for RAC - use ASM under the layer of management of storage between storage LUNS in the table and one side and CARS on the other.
-
10g RAC with 11i upgrade 11igR2
Hello
All the documents for the upgrade from 10g to 11g rac with ebs 11i.Danny,
Please refer to:
_11gR2: _
Note: 881505.1 - version of Oracle Applications 11i with Oracle 11 g Release 2
Note: 823586.1 - using Oracle 11 g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i_11gR1: _
Note: 452783.1 - version of Oracle Applications 11i with Oracle 11 g Release 1 (11.1.0)
Note: 466649.1 - using Oracle 11 g Release 1 (11.1.0.7) Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12Kind regards
Hussein -
where can I get the software for oracle database 11g RAC installion
pls can someone tell me where to download the installation software for oracle database 11g RAC with Yes which has the option of installing RAC database on, I the installation of database 11g software, but it does not include the installation of database RAC inside option, I heard someone say that the installer of oracle database 11g in oracle's Web site is not used to install a RAC database is it true? If that's how to make one that installs the RAC DATABASE.Download page:
http://www.Oracle.com/technology/software/products/database/Oracle11g/111060_linuxsoft.html-Oracle Database 11 g Release 1 (11.1.0.6.0) for Linux x 86
linux_11gR1_database_1013.zip (1,844,527,800 bytes) (cksum - 1044354138)-Oracle Clusterware 11 g Release 1 (11.1.0.6.0) for Linux x 86
linux_x86_11gR1_clusterware.zip (244,660,141 bytes) (cksum - 820583335)Maybe you need to download is: Clusterware Oracle 11 g
Document: Oracle® database 2 day + Real Application Clusters guide 11 g Release 1 (11.1)
http://download.Oracle.com/docs/CD/B28359_01/RAC.111/b28252/TOC.htm -
Configuration of the laptop for R12 with node 2 11g RAC database
Hi all
I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.
Configuration:
generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
this configuration will be sufficient for the highest installation? RAM? Processor?
8 GB RAM DDR3
750 GB HARD drive
I've read a few threads over on this forum where people have recommended for installation of single application (11i or R12), this kind of configuration can be enough.
Please answer.
Thanks in advance.
BrijI plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.
Configuration:
generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
8 GB RAM DDR3
HARD DRIVE 750 GBThis configuration will be sufficient for the highest installation? RAM? Processor?
You need at least 4 GB for installation on a single node R12. So, if you plan to have 3 VMs (1 application node) and 2 RAC nodes or 4 virtual machines (2 application and 2 RAC nodes), then I suggest that you add more memory. However, your RAM should work, but don't expect (if you go with 3 VMs) but do not expect the performance to be perfect.
Thank you
Hussein -
11g RAC - RAW Devices Configuration
Hello
Please let me know if there is a difference in the configuration of RAW devices for 11g RAC compared to 10g.
For example in 10g, we would separate RAW Devices for OCR, voting disk, ASM spfile, archives log files and database files.
Please let me know if configuring RAW devices in 11g is different from that of 10g.
Kind regards
N V
Published by: user7202581 on April 19, 2011 23:54Hello
all first with 11.2. directly use the RAW devices is no longer supported. However, you can use RAW devices below ASM. So if you use ASM for data files, archivelogs etc, then the ASM disks can be RAW devices.
Second: A general comment on Linux RAW devices. Have become obsolete from CRUDES Linux devices (I think with RHEL 5.3), so I recommend the direct use of block devices (which is possible since 10.2.0.2).No to your question:
With 11 GR 1 material has not changed the configuration of the CRUDE devices.
With 11 GR 2, the configuration has changed. See the Grid Infrastructure Installation Guide for additional and accurate information (on the installation, rights of user etc.).http://download.Oracle.com/docs/CD/E11882_01/install.112/e17212/storage.htm#CDECEBGH
Concerning
Sebastian -
11g RAC Installation fails add the instance on windows 2003 Server
I am install 11g RAC on windows server 2003.
Finished creating House of CRS and it looks good.
Tried to create the database using DBCA it gives me below error. Help, please.
D:\ > srvctl add instance d mgrpdb-i mgrpdb1 - n mgrpcluster-1
PRKO-2010: error in adding instance to the node: mgrpcluster-1
PRKR-1008: adding the instance mgrpdb1 on the mgrpcluster-1 node to the cluster database
mgrpdb failed.
PROC-27: error in authentication layer authentication failure [ALS error informat
ion: category: operation [1234]: [scls_iddb_get_privgrp_id_by_name] location: [L
[ookupAccoun] others: [LookupAccountName failed] Dep: [1332]] [1]
concerning
MusaddaqSalvation;
Please check below and see its useful for your question:
Upgrade to 10204 CRS cannot start Instance resource to aid native group 'dba' [603667.1 ID]
PRK % error - Cause and Action required [ID 178435.1]
Bug 3584146 - PRKR-1008 instance adding to SIR via SRVCTL [3584146.8 ID]It may be useful
Respect of
HELIOS -
Oracle 11g RAC can support 2 separate databases?
1. can you Oracle 11 g RAC support 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?
2. Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?
I'm leading a team for a project of 11g and appreciate the answers.
Thank you
Satish.Oracle 11g RAC will support the 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?
YES
Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?
YES
-
The practice of 11g RAC on 2 GB RAM box
I have a desktop with 2 GB of RAM. Operating system already uses 800 MB of RAM.
Is it possible to install 11g RAC on vmware with only 1.2 GB of memory available?
Or
A single node is possible for 11g RAC
Or
I can install it AS a single.
Please do not ask me to increase the memory because I can't :)RAC_DBA wrote:
I have a desktop with 2 GB of RAM. Operating system already uses 800 MB of RAM.Is it possible to install 11g RAC on vmware with only 1.2 GB of memory available?
Or
A single node is possible for 11g RAC
Or
I can install it AS a single.
Please do not ask me to increase the memory because I can't :)
Try for one RAC node. I was not able to maintain the stability of the VMS at least 2.2 GB for computers 3 virtual - constant restarts due to timeouts. (iSCSI to 256M, each VM CARS to 1 GB).
-
When I do a race with my Apple Watch I don't have a frequency heart displayon the session screen. When I then sync my activity with my iphone there is also no average heart rate on the completion of my activity. How can I get my heart rate displayed?
Hello
Mode power saving can be activated.
To check this, on your iPhone, in the application of the watch, go to: Watch My > Workout - if it is currently enabled, disable power saving Mode.
(When the power saving Mode is enabled, it disables the sensor of heart rate during workouts running).
-
Installing oracle 11g (RAC) on RHEL 6
Dear all,
Me and my team will install oracle 11g (RAC) on RHEL 6.
About mention above I have little doubt it please help me out in this matter.
In the network section.
Requirement of intellectual property:
1 public IP address
2 private IP
3. virtual IP address
Suppose we have two interfaces in each server, eth0 and eth1.
I put the public IP address in eth0 192.9.25.100 and private 10.79.1.100 eth1 IP address
Now where put the virtual IP address and what is the procedure.
Please help me to set the virtual IP address
Thanks and greetings
Yvon Das
S/n, Guwahati
Published by: Yvon on 23 May 2013 23:44Hello
See the message below:
http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-Oracle-Linux-6-using-VirtualBox.php
If you need clarification update here.
Thank you
A H E E R X -
can change uid and gid of oracle user after installation of 11g rac
can we change after installation of 11g rac oracle uid and gid in 11g RAC. ?
Thank you
BoucettaRead this
It is supported to change Uid/Gid of the owner of the Oracle database software after Installation? [1474891.1 ID]* "It is not supported to change the UID/GID of the owner of the Oracle database software after installing". * "
Please don't forget to close your message, you got your answer :)
-
NFS supports Oracle RAC with TAF?
Hello
NFS does support Oracle RAC with TAF function. ?
If so, please point to a valid document to prove the same thing.
Concerning
SumitTAF so nothing to do with the underlying and is storage architecture 'argued' with your choice of asm, raw devices, cluster file system and NFS. NFS is supported on some platforms. For more details, check the tab certifies in metalink. Some information can be found here
TAF will be available on any rac installation, but not all drivers support it (thin jdbc for example)
Bjoern
-
Configure the R12 with 11g RAC
Dear all,
Our current setup is:
Application tier node 4
1 DB node level.
We are now planning to switch to CARS and set up DR also uses the document below.
Business Continuity for Oracle E-Business release 12 using Oracle 11 g Release 2 and later Physical Standby Database (Doc ID 1070033.1()
I would like to know what can be done to SYNC the Application of Production layer with the standby Application tier.
That is to say) primary school:
Application 4 node
2 node RAC
Standby time:
Application 4 node
2 node RAC
Kind regards
Mahesh
Mahesh,
The list of files/directories that can be synchronized are covered in the same doc (search for "rsync").
Thank you
Hussein
-
ORA-15003 diskgroup already mounted another lock name space - 11g RAC using VMware shared disks
Hi all
I try to install Oracle RAC 11 g 2 on 2 machines OEL5 with VM disks shared as a shared disc ASM storage.
I am faced with getting the following error when running root.sh on the second node.
Create DiskGroup CRS failed with the following message is displayed:
ORA-15018: diskgroup cannot be created.
ORA-15017: diskgroup "CRS" can not be mounted.
ORA-15003: diskgroup "CRS" already mounted in a different namespace locking
Configuration of ASM failed, read newspapers files for more details
Succssfully not configure and start ASM
CRS-2500: Can not stop resource 'ora.crsd' as it is not executed
CRS-4000: Stop command failed, or completed with errors.
Return code of 1 (256) control command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd - init
Stop resource ' ora.crsd - init ' failed
Cannot stop CRSD
Here's what I found in the Setup log:
2014-02-19 09:42:12: mark for CSS existing voting records
2014-02-19 09:42:12: the initial configuration for cluster performance
2014-02-19 09:42:13: beginning of the resource ' ora.ctssd - init ' succeeded
2014-02-19 09:42:13: configuration ASM via ASMCA
2014-02-19 09:42:14: execution as the grid: /u01/app/11.2.0/grid/bin/asmca-silencieux diskGroupName - CRS - diskList ORCL:CRS1, ORCL:CRS3, ORCL:CRS2 - NORMAL redundancy - configureL
ocalASM
2014-02-19 09:42:14: running as user grid: /u01/app/11.2.0/grid/bin/asmca-silencieux diskGroupName - CRS - ORCL:CRS1, ORCL:CRS3, ORCL:CRS2 diskList - redundancy NORMAL configuration.
reLocalASM
2014-02-19 09:42:14: citing "/u01/app/11.2.0/grid/bin/asmca-silencieux diskGroupName - CRS - diskList ORCL:CRS1, ORCL:CRS3, ORCL:CRS2 - NORMAL redundancy - configureLocalASM.
«as user «grid «»
2014-02-19 09:42:47: ASM configuration failed, read newspapers files for more details
2014-02-19 09:42:47: not succssfully configure and start the ASM
2014-02-19 09:42:47: exclusive mode output
2014-02-19 09:42:47: 1 (256) command return code of command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd - init
2014-02-19 09:42:47: stop resource ' ora.crsd - init ' failed
2014-02-19 09:42:47: cannot stop CRSD
2014-02-19 09:43:34: failure of the initial cluster configuration. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac2.log for more details
I run root.sh on the second node only after finished on the first node.
In terms of VMware configuration, I've marked the disk.locking = "FALSE".
It is obvious that the diskgroup CRS would be already mounted by the first node. DiskGroup "CRS" already mounted in a different namespace locking
There is a that lock_name_space initialization parameter related to this, but that should be resolved by the YES itself the installation of clusterware/asm.
Any help is welcome.
Let know what would help more information
Concerning
stupid stupid control...
had set ORACLE_SID as + ASM1 on both nodes.
Set to + ASM2 on the second node and ran new facility...
went like a breeze...
I heard that it can also happen if the sys-network-config is not set correctly.
for example. both machines using the same name, say rac1... NOT TESTED...
It is very easy to miss one or two things with the help of VMware machine cloning.
I have a list of such things
Bravo!
Maybe you are looking for
-
Pavilion zd8398ea: laptop will not be upgraded to win7 Win10
My mavhine has been upgraded to Windows 7 service pack 1. He is current with the updates of Windows 7. I Win 10 App display, but he informs me that in can not be upgraded tp win 10 because there is a compatibility issue with the ATI RAdeon x 600: '
-
Windows Live ID sign-in assistant has stopped working
I had downloaded windows live ID sign in assistant and no longer had to type the user name and password for each hotmail account and outlook. All of a sudden, I have to type in all that every time I go to an account. I lost all the icons I just click
-
Lost my Freecell game, how to recover
Lost all my original games that were on when Windows xp has been installed: didn't like my Freecell now no games at all.
-
How do I want as an administrator when I have what it takes to run a program intall?
How do I want as an administrator when I have what it takes to run a program intall?
-
display flipped vertical rather than horizontal style. How to solve this problem?
My monitor turned vertical rather than horizontal style. Don't remember the solution to change... Help, please.