Virtual machines and remote subnets

Similar Questions

• Unable to start the virtual machine and snapshots are missing from snapshot Manager.

  Hello

  I'm new here in the VMWARE communities and I don't know if I'm posting this survey in the right place. I am currently using VMWARE Workstation 9. The issue I'm having is that I can not start my VM. The error that says:

  

  This is an overview of my settings:

  

  When I try to get a snapshot I can go back, I get this snapshot Manager screen:

  

  I checked the files on the directory of the virtual machine. The snapshot files are still there.

  I tried to solve the problem by editing the configuration of virtual machine file to use another vmdk. I got an error saying something about the parent and the child are not synchronized. Sorry I don't have a screenshot of that. I also tried to make a copy of one of the other VMDK and rename it to match with the name of the missing file. That also made me anywhere I tried looking on the net but I get answers to other vmware ESXi and vSphere products. So I don't know if they apply to my current situation.

  At this point, I'm hoping to recover my machine or at least be able to use snapshots. Please notify.

  I think that the restoration was the best way to solve this problem. I actually checked the different files, but it looks like I missed something. In any case, create snapshots with the virtual machine in a state engine is my personal preference. It is not only to save disk space (since there is no need to preserve the current state of memory), but also provides a consistent state. As for the number of snapshots, you're always on the stop side, and if you are not having issue of performace with small changes you make you should be ok. In case there is a performance problem, you may consider to store the computer virtual on an SSD that will certainly help.

  Since the Center of Documentation of VMware Workstation 10

  To the premises of the virtual machines, you can take more than 100 snapshots for each linear process. For shared virtual computers and remote, you can take a maximum of 31 snapshots for each linear process.

  André

  Post edited by: a.p. corrected fault, "SSD" instead of "SD".

• REALLY stupid question about virtual machines and disks of cancellations.

  I'm a bit hesitant to ask this question because it might make me look stupid, but...

  When I'm done using Virtual PC and a virtual machine running Windows XP Pro with Vista 64 Home Premium because the host os, often I did not any significant changes to the hard disk of the virtual machine.

  What I save gets saved to a network share on my server for files and printing from Win98 and saved on a flash drive.

  Assuming that I do no configuration changes or anything else I want to keep, is there a reason barely stopping properly when I 'cancellations discs' enabled?

  Any reason, I can not save time by pressing the 'X' button and choose 'disable and remove changes '?

  I am aware of patches, but took me to inform me of the patches, and I can get patches when it's convenient for me and I always validate changes when I install the patches. I'm not using it for anything other than my classes of the school of the evening for the time being, so it is not much of a value of protection on the virtual machine, and I used to write papers on the host operating system. I just use the virtual machine to play with the admin tools in an environment where I can easily fix it a massive screw-up without spending hours to reinstall Windows.

  Hey SlickRCBD,.

  Not a stupid question at all! :)

  It's very well hit the X when you have activated the disks of cancellations. And corruption or problems with the active virtual machine will be resolved when using the drive to cancel it.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

  I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

  The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

  I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

  Any idea what's going on?

  Original title: XP Mode Setup error

  Hi smithnr10,

   

   

  You must post your question in the TechNet forums because it caters to an audience of it professionals.

  To do this, you must consult the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this helps!

• vCenter shows all virtual machines and the host is disconnected

  Hello

  I have a two nodes in the cluster ESXi6 U2 (recently updated to 5.5) running on hp dl380p gen8. For some reason all the virtual machines are running on host A (HA and DRS are enabled).  vCenter shows all virtual machines and host A is disconnected. Cannot connect to A host using vSphere client or web client. Cannot vMotion the VMs. Impossible to activate SSH. Connection DCUI works very well. Cannot perform any action VM

  All virtual machines are in place are running at this point. I don't want to restart the virtual machines. Can you help me please?

  Thank you

  AJ

  Frozen screen DCUI came back to life. The active SSH access, killed the running process. The host of running backs.

  See you soon,.

  AJ

• Get virtual machines in a subnet

  I need to get all the virtual machines in a subnet given with something like this:

  Get - vm | where {$_.2ndOctet - eq "110"} #(vous voyez l'idée)

  How can I select a set of virtual machines based on their IP address so that I get all virtual machines in the subnet 10.110.0.0/16?

  Thank you!

  The easiest way would be something like this:

  Notice-EEG - ViewType VirtualMachine. Where {$_.guest.} IpAddress-like "10.110. *. * »} | Select Name, {$_.guest.} Ip_address}

  If you are comfortable with regular expressions you could do something like this as well:

  Notice-EEG - ViewType VirtualMachine. Where {$_.guest.} IpAddress-match "10\.110\. [65-66]. * »} | Select Name, {$_.guest.} Ip_address}

• Delete a partition in a virtual machine and expand the initial allocation of hard drive

  I have created a virtual machine running server 2012R2 with an allowance of 60 GB drive. I decided after doing hours of work on the virtual machine I had assigned too little disk space for the virtual machine. I decided that I just go in vSphere and change settings and add to the existing space. The problem is that it has created a new partition rather by increasing the size of the original, which doesn't help me. How can I remove this new partition and just expand the original that has been allocated when I created this virtual machine?

  Thank you

  Hi Paul,.

  Could you clarify what you mean by;

  The problem is that it has created a new partition rather by increasing the size of the original

  (A) do you mean you modified the virtual machine and added a second disc, rather than increase the size of the original? or;

  (B) you increase the size of the original disk and create a new partition in this free space?

  Be that as it may, the question should be simple to solve;

  (A) remove the second disk you don't need, increase the size of the original. Then from the OS Disk Manager, rescan the disks and extend C:\ in free space.

  (B) delete the partition that you don't need. From the OS Disk Manager, expand C:\ in free space.

  See you soon,.

  Jon

• How do to activate 'VAPP Options' on an existing virtual machine, and then add the properties that will be passed down through the OVF - ENV. XML

  
  
  I'm trying to understand vSphere PowerCLI how to activate the "Options of VAPP" on an exsiting VM (in this case a model freshly cloned) then add properties and select cdrom of the FVO data access such as when the virtual machine is running the FVO - env.xml contains the properties in the CD-ROM drive.
  
  If I use the vSphere client and open the virtual machine settings and click on the tab 'Options' and then select "Options of VAPP" and change the setting to "Enabled" and then select 'VAPP-> Advanced Options' and click on the button 'Properties' on the right, I can add the properties and then I can change them vsphere PowerCLI, but given that these actions are not retained if I clone the virtual machine I need a way to put these in place of vSphere PowerCLI without using the vSphere client to do.
  
  Thanks in advance for the help!
  
  

  Mike

  You can use the vSphere API to activate the 'Options of VAPP"on an existing virtual machine, and set properties. For example:

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.vAppConfig = new-Object VMware.Vim.VmConfigSpec

  $spec.vAppConfig.property = new-Object VMware.Vim.VAppPropertySpec [] (1)

  $spec.vAppConfig.property [0] = new-Object VMware.Vim.VAppPropertySpec

  $spec.vAppConfig.property [0] .operation = 'Add '.

  $spec.vAppConfig.property [0] = new-Object VMware.Vim.VAppPropertyInfo .info

  $spec.vAppConfig.property [0].info.key = 0

  $spec.vAppConfig.property [0].info.classId = "Property1ClassID".

  $spec.vAppConfig.property [0].info.instanceId = "Property1InstanceID".

  $spec.vAppConfig.property [0].info.id = "Property_1.

  $spec.vAppConfig.property [0].info.category = "Property1Category".

  $spec.vAppConfig.property [0].info.label = "property 1.

  $spec.vAppConfig.property [0].info.type = "string".

  $spec.vAppConfig.property [0].info.userConfigurable = $true

  $spec.vAppConfig.property [0].info.defaultValue = "Property1DefaultValue".

  $spec.vAppConfig.property [0].info.value = «»

  $spec.vAppConfig.property [0].info.description = "Property1Description".

  $vm = get-VM-name vm3

  $vm. ExtensionData.ReconfigVM_Task ($spec)

• Sharing of virtual machines and the NETWORK adapter settings

  I usually have multiple NICs per physical machine, and I often map more than one NETWORK card in a virtual machine. This does all work well with 'regular' virtual machines and virtual network Editor. I use 10.0.1 on linux 64-bit Workstation.

  As soon as I share a virtual machine, the NIC mappings cannot be changed in any useful way. I can spend only NAT, HostOnly and connected by a bridge in a ComboBox control, without the ability to select a specific vmnet. Although connections are bridged, they are displayed as NAT, which makes no sense at all...

  What is the reason for this? I'm doing something wrong? If this is the intended behavior, it's shared VMs useless for me...

  Kind regards

  Thomas

  I reinstalled VMware Workstation and now I understand what happened.

  I need ever - and HostOnly-setting in NAT network, so the first thing I usually do after installing VMware is to remove them and fills vmnet0 to eth0 and eth1 to vmnet1. This works perfectly well with non-shared virtual machines.

  For shared virtual computers, this mapping has been messed up somehow. Now it seems to work fine, I removed all the vmnets and has created vmnet10-> eth0 and vmnet11-> eth1.

  If the problem is solved for me; but I can't say how the maps I screwed up. I certainly had two bridged devices, but has been shown only a single bridged device.

  Concerning

  Thomas

• Get the IP of the virtual machine and MAC

  Hello

  I'm trying to get the IP of the virtual machine and the MAC one of my data centers.

  When I run that the following script two things happen:

  1. I don't see a vm in the output of the csv file.

  2. when I send the output to the quick PowrCLI I see only a mac and one IP address for virtual machines with network cards.

  Script

  ---------

  $MV = Get-Data Center $DC | Get-vmhost | Get - VM

  {foreach ($VM to $VMs)

  $VMx = get-view $VM.ID

  $HW = $VMx.guest.net

  foreach ($dev to $HW)

  {

  foreach ($ip in $dev.ipaddress)

  {

  $dev | Select

  @{Name = 'Name'; {Expression = {$vm.name}}.

  @{Name = 'IP address'; Expression is {$ip}},

  @{Name = 'MAC'; {Expression = {$dev.macaddress}} |

  Export-CSV VM - IP - Info.csv - NoTypeInfo

  }

  }

  }

  My console output, tested on a virtual machine with two external network cards and an internal interface "dummy".

  Name                               IP                                  MAC

  ----                                   --                                    ---

  VM1 192.168.1.1 00:50:56:xx:xx:xx

  VM1 192.168.2.1 00:50:56:xx:xx:xx

  VM1 192.x.x.xxx xx

  You see the addresses expected in summary using vSphere Client VM?

  Oh sorry, I forgot the PS 3.0 requirement.

  You can put all the entries in a table and export all at the end of the script.

  $out = @)
  $VMs = get-data center $DC | Get-vmhost | Get - VM
  {foreach ($VM to $VMs)
  $VMx = get-view $VM.ID
  $HW = $VMx.guest.net
  foreach ($dev to $HW)
  {
  foreach ($ip in $dev.ipaddress)
  {
  $out += $dev. Select @{Name = 'Name'; {Expression = {$vm.name}}, @{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}
  }
  }
  }

  $out | Export-Csv - NoTypeInformation-Path ' VM - IP - Info.csv.

  Concerning

  Emanuel

• Need to move virtual machines and power over the other ESXi HA and issues of Configuration of power

  Dears

  Need to move virtual machines and power on ESXi others using the HA and Power Options

  So what are the Options I need activate and deactivate:

  Turn on Vsphere HA

  Activate the tracking host

  Admission control (disabled)

  VM Machine Options

  VM restart priority (medium)

  Response from the host of off the power isolation

  VM monitoring (people with disabilities)

  Monitoring of (high) sensitivity

  Heartbeat of data store (select one of cluster data warehouses taking into account my preferences) of the data store is checked

  On each:

  Start/stop of the virtual machine is turned off

  Please indicate the required Options and on virtual machines, we are not turning on?

  Just to be clear, that VMware HA will only restart the VMS if ESXi hosts fails - or surveillance of the VM is turned on which will be monitors VMs will they crash or suspend and restart the virtual machine affected.

  and just to be clear, that the response of insulation parameter has nothing to do whther THAT HA will work or not - it does come into play if the ESXi host is isolated of the HA - Cluster

  xMotion works only between active ESXi hosts that can communicate with the server vCenter - and if the ESXi host broke down or became isolated and vMotion may not work.

  vMotion is automated with DRS that vMotion will a VM who need more resources to an ESXi host with enough reosurces.

• Suggestion on Vcenter DB migration on the new virtual machine and enhancement vcenter server

  Hello

  I'm looking for any suggestion/plan with Vcenter DB migration steps towards the new virtual machine, and then upgrade the server vcenter

  4.1 for Update1/2

  My plan will be

  (1) creating new virtual machine.

  (2) fresh install 64-bit OS

  (3) migration Vcenter DB of the physical server to the new virtual machine.

  (4) upgrade to Vcenter Server 4.1 update 41 4.1 Update1/2

  Anything else missing then please let me know.

  Thank you

  vmguy

  Hi vmguy

  I agree with this approach

  (3) migration Vcenter DB of the physical server to the new virtual machine.

  As long as you leave the old DB in tact and simply detach and copy the DB to the new Victoria Cross.

  Before you run the upgrade on the new VC and DB.

  This way, you have a restoration plan in case something goes wrong with the upgrade.

  Just to add:

  You must migrate the ADAM database so to maintain the specified permissions vCenter

  See: Migrateing vCenter new host

  Please allow points if you find this useful/correct

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• List virtual machines and their DNS server settings

  I try to list virtual machines and their primary and secondary DNS server addresses.  Are the cmdlets in vmware that can do this, or would I need to use the invoke-script command.  I have the list of virtual machines and I want to list them all with their DNS server addresses.

  I tried to use the wmi objects such as:

  Win32_networkadapterconfiguration get-wmiobject - computername "servername |

  Select name, DNSServerSearchOrder

  It would give me the specific server name and addresses of dns.

  But I need the list of servernames which I would like to list some and their

  DNSserversearchorder settings (DNS settings)

  I tried to put the servernames list in a text file using

  Get - vm | Export-csv C:\computername.txt - notype

  Then I used the get-content command and the pipe in the get-wmiobject

  command like below:

  $servers = get-Content c:\computername.txt

  ForEach ($server in $servers)

  {get-wmiobject Win32_networkadapterconfiguration - computername $server

  | where {$_.} IPEnabled-fits 'True'} | Select-object

  name, DNSServerSearchOrder

  But when I run this command fails with errors such as a pipe empty

  element is not allowed.  I don't know if the above script has all synatx

  error or what is the best way to get a list of servers and their dns server

  Parameters.

  I know the wmiobject maybe out of this range in these newsgroups but there at - it a script in powershell, vmware or windows powershell to get a list of servername (which are mostly VMS) and their DNS server settings.

  Try the following script to get the DNS search order:

  Get-Content c:\computername.txt | `
  ForEach-Object {
    Get-WMIObject Win32_NetworkAdapterConfiguration -Computername $_ | `
      Where-Object {$_.IPEnabled -match "True"} | `
      Select-Object -property DNSHostName,DNSServerSearchOrder
  }
  

  Best regards, Robert

• Possible to suspend a virtual machine, and then disconnect the SAN?

  I decided to do an interview on a small environment ESX 3.5 and I was wondering if its possible to suspend a VM and then disconnnect the SAN to maintain SAN.  If I record data suspends storage local would this work? Is it more fast and stop the virtual machine and the power save?  There is the performance of 6 virtual machines on a single host with a single iSCSI SAN.

  was wondering if its possible to suspend a VM and then disconnnect the SAN to maintain SAN.

  A suspension is identical to a power off, it shows just the guest to Hibernate.  So yes, it is safe.

  Is it more fast and stop the virtual machine and the power save? There is the performance of 6 virtual machines on a single host with a single iSCSI SAN.

  No its not faster, its more fast and more reliable to power off the virtual machine rather than suspend.  If you need to follow the process and suspend its critical use, otherwise a scheduled interruption is better.