Similar Questions

• Large (100 gig +) file transfer fails in Windows 7 Home Premium 64-bit

  Hello

  I ran out of sensible troubleshooting options and am hoping that someone on the forum may be able to provide a solution or additional troubleshooting ideas.

  Scenario: I created a 178 concert file, an image of my old laptop XP file to be used for a virtual machine, on an external drive of USB3 for import to my new Windows 7 Home Premium 64 bit computer laptop (ASUS N61JQ i7, 4Gig of DDR3 RAM). Operation failed for copy of file on the Win 7 machine (current patches, drive D:, NTFS, 250 free concerts), without error messages, regardless of the method.

  Troubleshooting:

  Removes the file structure - exemplary fine for XP SP3 on a different machine, a smaller version (image of the C: drive only) copies very well to new laptop Win7 and creates the virtual machine that works.

  Eliminated the USB drive - used 2 different drives

  Eliminated from the USB - used Ports all three USB 2 and 3 ports and all failed, tried mapping to machine XP and do a drag and drop and copy and paste and even set up a ftp server on the Win 7 and tried machine download failed him via gigE and 802.11nall.

  More advice in this forum and others, I downloaded Teracopy who do not - this failed with a message indicating that "the operation failed due to a file system limitation", but wikipedia shows the limit of file of an order of magnitude larger than my 16 TB file.

  I also tried PowerShell coming to stop the copy without error message (resource monitor showed no activity on the external drive - the source of the file).

  I also have:

  • tried disabling / uninstalling antivirus
  • run the copy in safe mode
  • I tried to find answers in the newspaper of the events without success.

  All seemed to fail somewhere after 100 gig mark. Often (but not always) failures caused strange behavior, including being unable to , unable to task switch, unable to stop. Often (but not always) a power switch reboot was necessary. My suspicion is that the copy of file is using some pool of memory that is needed by other processes of basic and cause misfortune wide system.

  Interestingly, a new file by concatenating a line of 50 concerts three times for 150 gig in the same location as the destination file, a new file in target in the same place creating worked!

  After having exhausted the limits of my personal creativity I now submit this problem to the collective wisdom of the tribe. A big thank you in advance, Richard.

  Success!

  I tried another file copy utility FastCopy http://ipmsg.org/tools/fastcopy.html.en, he also failed, but with a slightly different error message:

  "The requested operation was not successful due to a file system limitation665"

  Search on Google that the message has led to this article:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/e0d55018-CF06-43ca-8e20-dd2bb8494c96

  ... his fundamental premise - de-Frag - did not help (drive was off fragmented already), but the link internally to:

  http://TechNet.Microsoft.com/en-us/library/cc781134%28WS.10%29.aspx

  which is a NTFS bible made me think on the compression of files and directories and of course the compression in this directory was put on, I never use the disk compression so I don't know how it's happened, but once set to 'off', the flow of the copy more than doubled and the copy proceeded until the end!

  Things that Microsoft might want to address:

  • I don't see anything in the literature suggesting there is a limitation to the compression of files. Fixing it, or the weakness of advertising would be a good thing
  • None of the built-in tools advised of an error or managed properly, one would think that NTFS has been mature enough so that it would no longer be a problem.

  Sort of, it's fixed now:

  Solution: COMPRESSION SET OFF

  Best regards and happy new year

  Richard

  

• Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

  I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

  After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

  HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

  You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

• MS Streets & Maps works in Windows 7 Home Premium 64-bit.

  It cannot get MS Streets & Maps works on Windows 7 Home Premium 64 bit.

  See the title.

  Hello Gemard,

  Streets and trips 2008, 2009 and 2010 are compatible with Windows 7. Earlier versions may not work, however you can try and use Compatibility Mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  If it is not a success, since you're under Windows 7 Home Premium, you can search for 3rd party software of vitualization that works on Home Premium and run Streets and Trips in a virtual environment.

  If please reply back and let us know if it helped to answer your questions.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• More games and Windows 7 Home Premium 64-bit

  Hello Microsoft supports the team.

  I would like to play the older games like Dungeon Keeper2, Tomb Raider2 and Star Wars: the threat ghost on my Windows 7 Home Premium 64-bit. I tried to change the compatibility settings, and it does make a difference. If you could tell me about a good VM to use or something else, I would be gratefull, thank you.

  Kind regards.

  Jacques van Wyk

  For Dungeon Keeper 2, you can follow this guide, it can help.

  For Tomb Raider 2, I think I found something on this site, in any case I do not know if they have solved the problem (I'm Italian and I did not quite understand what they were doing), so try at your own risk.

  For Star Wars: The Phantom Menace tell him guide. (Possibly a 32-bit operating system, too)

  None of these reviews are officially supported and I have not test them, so continue at your own risk.
  Personally, I think that if you're someone who frequently use old video games (video games, you mentioned all have more than 10 years!), it would be more convenient to install Windows XP or at least Windows 7 32-bit (most of old video games was 16-bit: Windows 7 32 bit can handle most 16-bit applications in Windows 7 64 bit cannot) , or (even if it will affect the speed of the game) Windows 98 on a virtual machine (there are a lot of choises: Oracle VirtualBox, VMWare, Microsoft Virtual PC, etc...)

  Hope this helps, spero di essere stato of aiuto.

  Windows7RULES.

• Windows 7 Home Premium 64-bit Danish

  Hello

  I want to format my PC and found out that it is legal to download an online version of Windows if you have a CD - key legal. I have a CD - key legal, but I need a copy of Windows 7 Home Premium 64 - bit in Danish. So far I've been able to find it in other languages but not Danish. Is there anyway to find this online version?

  My restore partition does not work, so I can't create the recovery of my own DVDs.

  Hello:

  1. download the Windows 7 Pro x 64 Danish on the link below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  2. follow this guide to remove the ei.cfg file in order to obtain all versions of W7, and then either create a flashdrive bootable using win to Flash, or a bootable DVD using Imageburn (these two methods appear in the instructions).

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3827.2-1-4-deleting-the-EI-cfg-file-to-obtain-all-versions.aspx

  You can also see if you can buy recovery discs for your PC on the link below:

  http://www.best2serve.com/page/rcd_landing

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Palm Tungsten E2 Bluetooth just to ICS on Windows 7 Home Premium 64 bit

  Connecting Palm Tungsten E2 (TE2) via Bluetooth for ICS (Internet Connection Sharing) on Windows 7 Home Premium 64-bit.  No other requiered just internet activity, the two are paired, I can see TE2 on Win and Win tour on TE2, TE2 just can't connect with the tour, I got 2 messages according to the network, I try, so I think that I must correct the type of network, any suggestion?

  In the Tower, no palm software installed as I Don t Sync to any doc, the order of the day,...  Just interested in ICS.

  Hello and welcome to the HP support community!

  You will most likely need an application called Softick PPP:

  http://www.Softick.com/PPP/

  WyreNut

• Inoperative"HP Support Assistant" on a HP Pavilion p7-1254 to help de-Windows 7 Home Premium 64-bit

  Product name: HP Pavilion p7-1254

  Operating system: Windows 7 Home Premium 64-bit

  Error message: HPSF.exe has encountered a serious problem and needs colse.  Click 'OK' to outomatically restart this application

  Changes to the system: NO

  When the error occurs?  Is this a feature repeated at startup or at another time?  Updates to the system recently (Windows Update or other updates from HP support)?

  The normal solution for most of the problems with HP Support Assistant is to uninstall the application from the control panel / uninstall a program.  Then download and install the latest version of HP Support Assistant from the HP Web site:

  HP Support Assistant

  Search the topic download HP Support Assistant and select laptops or desktop computers, according to the case.

• driver ethernet controller and Windows 7 Home Premium 64 bit HP 110-3000 pci device driver missing

  I need the driver for ethernet controller and pci for Windows 7 Home Premium 64 bit device driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  Hello

  Try the following:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48885.exe

  Kind regards

  DP - K

• Serscan.sys missing on Windows Vista Home Premium 64-bit when you try to install Office Jet Pro 8600

  Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit?  My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive.  I received no installation CD of Windows Vista with this computer when I bought it new.  Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.

  Hi Excompost,

  Follow the steps outlined in the document below. Let me know what you find?

  Installer Serscan.sys file not found when installing network

• Pavilion g6: no update of the download links for Windows 7 Home premium 64-bit?

  I have a pavilion g6 and my hard drive has been corrupted. I had windows 7 Home premium 64-bit preinstalled, but could not find a new download links for the ISO, as they have all been removed. Anyone know where I can download the ISO?

  I have not personally used these links, but the answers he is other people are positive:

  http://getintopc.com/softwares/operating-systems/page/8/

• The upgrade to Genuine Windows 7 Home Premium 64-bit

  Hey,.

  Today, I ordered a new laptop of PC portable Compaq Presario CQ61-420EJ and it comes with an operating system of "Genuine Windows 7 Home Premium 64-bit. I have an original desc of "Windows 7 Ultimate 64-bit the question is, can I upgrade to the version that is installed in my new laptop with the version that I already have?"

  Thank you

  Scott.

  Yes, you can upgrade from Windows 7 Home Premium 64-bit for Windows 7 Ultimate 64-bit. You do not lose the pre-installed software & drivers, if you upgrade. If you perform a clean install of Ultimate, you will lose all the pre-installed software.

• Presario CQ56 Windows 7 Home Premium (64-bit)

  I listened to people who have claimed to be experts, big mistakes. I bought this laptop used. Compaq Presario CQ56 with problems. I had reformatted it and Windows 7 (64 bit) relocated to Arkansas, it's over. I had an another 'Expert' work on that here and now, is that he put a pirated copy of windows on it. I have some experience with computers from DOS to Windows 98. I also have a desktop computer with Windows XP I've worked with some. I am now located in the Philippines and need to get a copy of Windows 7 Home Premium (64 bit) so that I can try and restore my computer to original factory. What I need, is the drive installation and instructions on how to do it properly. There, any help will be appreciated.

  Hello:

  My recommendation is to have a friend or relative in the USA order a set of recovery discs for your laptop from the link below and send them to you.

  They would need to be able to enter the serial number of your PC.

  To order, they click on the link below and then click on the link labled order recovery media.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5048730

• How to upgrade the graphics card drivers sony vaio laptop computer vpceb45fg Windows 7 home premium 64-bit?

  How can I update the graphic card drivers in sony vaio vpceb45fg laptop Windows 7 Home premium 64-bit runningt?

  Hi simran1976,

  Use the link below to download and install the video drivers:

  http://www.Sony.co.in/support/product/VPCEB45FG#

  http://www.Sony.co.in/support/product/VPCEB45FG#

  If my post answered your question, please mark it as an "accepted Solution".